# Nested IF Formula With Date Function?

Mar 4, 2013following

i tried formula =IF(F$1

following

i tried formula =IF(F$1

ADVERTISEMENT

I amtrying to find a way to nest a formula in the Match function.

How can i make the following formula more dynamic so that I do not specify the colum "AY"?

=MATCH(11,Data!$AY:$AY,0)

The information is contained in column AY labeled "New-Rate" in the data sheet

I am creating a worksheet and I have a formlua where the value is text. I can make it work standing alone but not with other variables. =IF(E11=S1,0)+(IF(E12=S1,0)+(IF(E13=S1,0.0025))+IF(E14=S1,"Call for Prciing"))

View 2 Replies View Relatedis there a way to turn the following formula into a function ?

=IF( COUNTA(A1:A7)=SUMPRODUCT((A1:A7<>" ")/COUNTIF(A1:A7,A1:A7&"")),"No Duplicates","Duplicates")

I just have no idea where to start ?

I am entering the following Nested IF(AND statement into a cell and getting a message stating "You've entered too many arguments for this function." Any idea on what formula I can use to get the needed information into this cell based on the fact that there are different inputs that can be entered into the related cell that will trigger the needed respons in the working cell?

=IF(AND(K1051="Down",L1051<2),"Yes","",IF(AND(K1051="Partially Down",L1051<2),"Yes",""))

I keep getting the "You've entered too many arguments for this function" error.

Here is the formula:

=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))

I am trying to create a nested IF function (has 5 IF statements), however,

every time I put the brackets at the end of the function, it puts a little .

next to the false answer, removes the brackets and comes up with an error

message?

This is only happening on one particular PC, when I create the same formula

on other pC's, it works fine so I know my formula is correct.

is there a setting on the PC that must be wrong?

I have an assignment in which I have to use nested, IF, AND and OR functions. Does anyone know the syntax for this kind of function? Basically I have to determine leave time based on years of service and whether the employee is full time or part time. Part-time with less than 1.5 years of service = 0 days of leave Part-time over 1.5 and full-time under 1year = 3 days of leave and full time over 1 year = 5 days of leave. I know how to do a nested function, but I have not worked with both an AND and OR together.

View 10 Replies View RelatedThis formula seems to work fine for the first two logical tests, but when it come to adding the third, I get an error.

=IF(E5="Hourly",C5*D5,IF(E5="Daily",(C5*D5)*8,IF(E5="Weekly",(C5*D5)*32,''"))

I am receiving an error using the following string as I am not using the OR request properly.

=IF((+$B7&$C7&$D7&$E7)="","",IF(+D7="",+I6,+D7) OR IF(+D7="(blank)","",+D7))

I am struck in using IF /AND in nested function as follows,

A1B1C1D1E1F1G1

1 3 5 7 9 32

=IF(AND(F2>G2,AND(IF(A2>1,A2,AND(IF(C2>5,C2,AND(IF(E2>9,E2),""))

(Above, A1 to >G1 are cell address , in exact rows are actual values)

I need to keep track of my salesmen's time. However, the company will not pay for the first 45 minutes so I need a formula that says, if the time entered in under "worked" is less than 45 minutes, no time will be deducted. If the time entered is equal to or greater than 45 minutes, 45 minutes will be deducted. These are the columns needed and the Daily Hours would be the total of all the previous columns. WORKED TRAVELED LUNCH DAILY HOURS

View 2 Replies View RelatedI am trying to concatenate the text of a few cells in a specific worksheet. I'm not wanting to use the STRING & STRING type code because I already had a Concatenate formula nested with an index formula and needed to have this formula copied to a certain RANGE, Where the RANGE was specified by a Variable. T

he Code below does what I need if the CONCATENATE/INDEX formula is in the cell that im copying already. (BELOW) The Formula in the cell, for example, on row 19 of worksheet "COMMISSION", that needs to be copied and incremented down the VARIABLE RANGE is

=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1)).

VB:

Dim iInput_Rows As Integer

iInput_Rows = Worksheets("Workspace").Range("D3").Value

Dim iOutput_Rows As Integer

iOutput_Rows = Worksheets("Workspace").Range("D1").Value

Dim iAnalog_Rows As Integer

[Code] ....

My problem is when I use the following code to insert that concatenate/index formula, through vba, then I get errors because it evidently doesnt like the " " for the space i needed between texts. (The Formula is concatenating text in those cells but every other Row) Can I do this in VBA?

VB:

Worksheets("COMMISSION").Range("B19 + iOutputs_Rows").Formula = "=CONCATENATE(INDEX(OUTPUTS!J:J,(ROW(OUTPUTS!J2)-1)*2+1)," ",INDEX(OUTPUTS!K:K,(ROW(OUTPUTS!K2)-1)*2+1))"

I'm writing a spreadsheet where I need to calculate a nested IF function (I think), and I am unsure of how to do it.

The problem is this:

The total $ value of the quote is entered, then depending on two variables, a rebate may be deducted from this total value. The first variable is eligibility (a Y/N response), the second is the type of project - there are two types of project and each attract a different rebate amount.

So I have:

A: total quote $

B: Eligibility - 'Y' or 'N' (if 'Y', then value of 'C' is deducted from 'A'), (if 'N', then no value is deducted from 'A')

C: Type - '1' or '2' (if '1', then 'C' = $1000), (if '2', then 'C' = $1600)

D: final result

I have multiple sheets within one Excel file. Each sheet is structured the same way. Column B lists Client's last names, which differ from sheet to sheet, though some clients may be repeated in several tabs. I have a column K which displays either the number 1 or 0. This is consistent between sheets.

I have created a formula that will look at the last name in a specific cell in column B of sheet 2 (FY 07) and search sheet 1 (FY 06) column B for the same last name.

=IF(MATCH($B5,'FY 06'!$B$5:$B$24,0),1,0)

If the same last name exists and if column K of sheet 2 and sheet 1 display a "1", I want it to place a 0 in the formula cell.

So, if there is a client that is in both sheets and has a "1" in both columns K of each sheet, I want the formula to let me know.

i have several days trying to convert a If nested function in a automate macro, the problem is that i have a lot of formulas, and the machine becomes slow, so i have to apply this formula to "column G"

=IF(LEFT(F2;1)="J";"C";IF(LEFT(F2;1)="g";"C";(IF(ISERROR(VLOOKUP(F2;rifs;1;FALSE));"NC";"C"))))

I receive montly investment performance projections going out monthly for 10 years. I need to show the return annually for each year. I created a SUMIFS formula to sum the percentages between two date ranges (beginning of the year and the end of the year for each year). However, my SUMIFS formula does not take into considersation compounding. How can I modify the SUMIFS formula I created to take into consideration compounding?

I know how to convert monthly percentages to an annual percentage,using the PRODUCT formula =PRODUCT(1+T15,1+U15,1+V15,1+W15,1+X15,1+Y15,1+Z15,1+AA15,1+AB15,1+AC15,1+AD15)-1, whereas T15:AD15 is the monthly percentage gain. Is there a simplier/alternative way that I can incorporate into the SUMIFS formula?

If it is too complicated to utilize a SUMIFS formula, I would like to be able to select a range of cells and have Excel calculate the result vs typing "1+[select the cell]," for each month. It takes me forever and open to input errors. It would be much easier to be able to select a range of cells when creating the formula.

I want to substitute the following "special" characters for an underscore. i need to do 9 different characters!!! is there another way?

as you are limited to 7!!!

excel 2003!

=INDIRECT("_animal_"&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(C2," ","_"),"/","_"),"-","_"),"&","_"),"~","_"), "(", "_"), ")", "_"), "$", "_"), ":", "_"))

I had more than 7 nested if statements so I attempted to formulate the named ranged formula. My 2 ranges are as follows: LDD1=IF(MONTH(P1)=MONTH(F2),C5-F5,IF(MONTH(P1)=MONTH(G2),C5-G5,IF(MONTH(P1)=MONTH(H2),C5-H5,IF(MONTH(P1)=MONTH(I2),C5-I5,IF(MONTH(P1)=MONTH(J2),C5-J5,IF(MONTH(P1)-MONTH(K2),C5-K5,IF(MONTH(P1)=MONTH(L2),C5-L5))))))) LDD2=IF(MONTH(P1)=MONTH(L2),C5-L5,IF(MONTH(P1)=MONTH(M2),C5-M5,IF(MONTH(P1)=MONTH(N2),C5-N5,IF(MONTH(P1)=MONTH(O2),C5-O5,IF(MONTH(P1)=MONTH(P2),C5-P5,IF(MONTH(P1)-MONTH(Q2),C5-Q5))))))

Basically what it's doing is comparing the current month with the month in the column heading and calculating appropriately. However, when i input the if statement (=if(LDD1,LDD1,LDD2), i get an error saying that it's an inconsistent formula and the result that it gives is wrong, too. Problem cell is e5

I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.

Issue: All I would like to do is for a NESTED IF Function to be able to say this:

1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square

2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.

3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.

If 'Column A' - 4" Square, Then 'Column B' - A

If 'Column A' - 5" Square, Then 'Column B' - B

& So on...

But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:

User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A

User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B

& So on...

Currently to do the above function, I have utilised the following Excel NESTED IF Function:

[Code] .....

& The following happens:

1. User inputs data into 'Column A'

2. The NESTED IF Function then provides an automatic response.

3. However it relies on the data being inputted without the ' " (Quotation Symbol)'

4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"

Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.

Example - IF Function.xlsx

I setup this function to pull my staff's schedule an auto generate the forms i need however the lookup function works properly sometimes and improperly others i checked the syntax and it is correct how ever the wrong data is continually returned. I have attached the file if anyone can help. the VISUAL PLAN tab is the one contaning the formula and it pulls data from PLAN, CURENT SCHEDULE, AND CATAGORY SUMMARY however the only formulas hat i have a problem with are the ones referencing CURENT SCHEDULE.

View 9 Replies View RelatedI am trying to return a TRUE or FALSE based on a date in a cell.

for example:

if cell A1 = 07/11/2009

I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.

I have tried stuff like:

=IF(A1=TODAY()-14,"True","False")

but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?

I am trying to find the starting effective month for a workyear. The criteria for the selected month is that the data BEFORE the effective month is all zeros. I manage to get the result if the data AFTER the effective month is ALL non- zeroes. If there is any zero, the data fetch will be inaccurate due to the COUNTIF formula. Is there any other way or formula that will enable me to get the result. File attached for testing and reference

View 6 Replies View RelatedI am trying to use a combination of Concatenate and IF formula to produce an email.

My input.

D4: First Name:

D5: Middle Name:

D6: Last Name:

D8: Organization:

Once all these are filled, I want the formula to produce a result like

FirstName.M.LastName@Organization.com

I have used the following formula.

[Code] .....

Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.

FirstName..LastName@Organization.com

How do I remove the additional (.) in cases where there is no middle name.

Attached File : Email Generator.xlsx

I need a simple IF AND formula. I just can never manage to get them right. I need a formula (in Column M) to evaluate a date count in Column L (which is a count of business days since another date, fyi). It needs to check to see if the number of days since the date in Column L is greater than 10 AND if the value of Column I is one or zero. If the argument returns true (more than ten days and a zero in Column I) it should return a vaue of "Yes" and "No" if false.

The range B7:K7 contains columns of "dates" and "characters" like "A", "B" and "C" . Range D2 = Today's date. If Range C7 is blank then it should calculate Today's date minus Column B7 (i.e D2-B7) so on:

B7 = "01-Apr-2009", C7 = "02-Apr-2009", D=7 = Status as "(A)"

B7 = Submitted Date, C7 = Received Date, D7 = Status

Difference Between Today's Date and "B7" date is required if "C7" is Blank date. Otherwise it should search next group (E, F)

=IF(AND(ISBLANK(C7),NOT(ISBLANK(B7))),D2-B7,IF(AND(ISBLANK(F7),NOT(ISBLANK(E7))),D2-E7,IF(AND(ISBLANK(I7),NOT(ISBLANK(H7))),D2-H7,IF(AND(ISBLANK(L7),NOT(ISBLANK(K7))),D2-K7,"--")))))

-- Excel File is attached.

I have a query around dates and current project status.

I1 Contains the Current Date

C4 Contains Due Date

C5 Contains 4 Possible Selections. Not Started, In Progress, Awaiting Feedback,

Complete

What I want the formula to do is.

IF Current Date is greater than Due Date AND Current Status is either Not Started or In Progress then return Overdue.

I've written it as follows, but it doesn't seem to work?

=IF(I1>C4,IF((C5="Not Started",IF(C5="In Progress"),"Overdue",""),""))

I have got a table with data from 2005 to date, (for example) For the purpose of what I am doing I need a column which shows date ranges between September 2005 - August 2006 to show as 2005/2006, then September 2006 - August 2007 to show as 2006/2007. I have done some research and seen that, Potentially, a nested 'IF' can be used but it can only be used 7 times which would cause a problem going forward....

Is this the only way or is there a better way (without using VB)?

I am using Excel 2010

I have a rather large formula that I put together and it's shown in column 'C' in the small sample file I have attached. I'd like to add one more criteria such that I avoid duplicate solutions in column 'C'. i.e. I only want the first occurrence of a group.

The formula works fine 'bucketing' the first entry. If I have an solution in C I want the formula to not give me another answer if the cell immediately above has an answer. In other words, rows 11 and 15 would be blank because rows 10 and 14 have an answer.

I've tried inserting another criteria in the AND statement, like ISBLANK for the cell above, but I can't get it to work. What am I doing wrong, OR is there a simpler solution?

=IF(C2="Windows",B2,IF((AND(A2=A3,C3="Windows")),B3,IF((AND(A3=A4,C4="Windows")),B4,IF((AND(A4=A5,C5="Windows")),B5,IF((AND(A5=A6,C6="Windows")),B6,IF((AND(A6=A7,C7="Windows")),B7,IF((AND(A7=A8,C8="Windows")),B8,"None")))))))Here is a link to the spreadsheet (D2 being the formula cell):

http://img199.imageshack.us/img199/8500/29072008.jpg

Basically, I am trying to put the columns data (if it has a porch, conservatory, windows) into one row for the contract number, as the dump which I have, is giving me seperate row's instead of one.

I am trying to get the formula to check if the contract number matches on the following row, and if it does, to check if the Product Description matches the header of that row (if it's a window, conservatory) if so, copy the quantity cell into D1, however, it's copying it even if the contract numbers do not match and I do not know where I am going wrong!!

Copyrights 2005-15 www.BigResource.com, All rights reserved