I have sheet where percent change is calculated. All of the data isn't put in at once, so i don't want it to a calculate the percent change until both cells contain a number.
Here is the formula i am using: =IFERROR((D4-B4)/B4,"")
Right now when i fill in the first value it automatically returns a percent change of -100%, i want it to wait until both cells are filled with data.
I'm after some vb code that will only allow the range - PRODUCT_Selections!A2:C370 to calculate, when something is changed in the range - Input!T11:V500
I would like all other calculations in the workbook to continue as normal.
I'm trying to calculate whether a time value located in a cell is between the times in two other cells. Here is what I tried:
=IF((AND($A62>=C$55,$A62
I have some rather complex formulas that when a value is placed in one of any three cells it solves for the other two, taking values from other places on a worksheet (including the cell itself).
Scenario: Cell F10, G10, and H10 all have formulas in them. If a value is placed in F10 it solves for G10 and H10. If a value is place in G10 it solves for F10 and H10. If a value is placed in H10, it solves for F10 and G10.
I really do not think the actual formulas matters at this time...
Has anyone done this before, using VBA code to place the formulas in cells F10 G10 and H10? Look for a working example of this if possible.
I'm working on a timetable for my boss and i'm trying figure out how to have vba detect when a specific set of cells gets an x typed into it and calculate 1 cell = 36.50 hours and input into the appropriate Sum column. The Sum Total is Column AR and i've put x's into some of the cells that will be containing them, i'm sure if i just get the basic code needed i will be able to implement it.
View 5 Replies View RelatedI have a macro which autofilters a range of cells.
I can count the number of visible rows by using the following code
Code:
lcountActive = Range("BC34:BC" & x).SpecialCells(xlCellTypeVisible).Count
What I would like to do is both calculate the Average value of the visible cells and the Sum as well. I have tried to adapt the code I have but my knowledge is just not good enough to do this.
I have one excel sheet with columns from A to LZ and number of rows.
Each column have only letter (one of A,B,C,D,E). This if for weekly table:
COLUMN define: Mon-Sun
ROWS define: work type (A B C or D)
For example;
COLUMNS: Su-Mo-Tu-We-Th-Fr-Sa-Su-Mo-......
ROWS: A -A - B - B - B - B - B -C - C - ......till column LZ.
Issue:
I want a formula for any row, from which, I can calculate (for that particular row) number of B's on Mo-Tu right from column A till LZ.
creating a macro, which can, for each name's values calculate average for non-highlighted cells in the value column.
Currently I have to manually do this for each row -- [=(B12+B14+B15+B16+B17)/5], in column S. hence I am seeking a macro approach, which would make it easier to take into account larger dataset.
I have a attached example file, with sample data, which shows row1, representing the actual columns of the data layout. AVERAGE.xlsx
The desired output I am looking for, is to be able to execute the averages in column S, for each name's value (non- highlighted cells) using a macro, if possible.
Every time i open my workbook it recalculates and takes ages
is there anything i can press to halt the recalculations so i can go in and change the formulas that are making it take so long.
How do I modify this formula to calculate visible cells?
=AVERAGE(IF($U$8:$U$720="AM",$H$8:$H$720))
I am trying to generate a formula that will add the last 17 cells over 25 cells worth of data. If there is nothing entered in one of the cells then the formula should add the next cell.
i.e. column Z needs to add A1:Y1 but only add the last 17 cells that have a number in it so this should add I1:Y1 to give 17 cells worth of data. BUT if for example L1 and P1 are zero, then column Z needs to add G1:Y1, still giving 17 cells worth of data.
if there is a way (without using a macro) to calculate just a specific column or selected area in a spreadsheet. It is a colossal spreadsheet and takes a few hours to calculate even just one sheet. I know you can go through it hitting F2 then enter a lot but that is getting tedious!
View 9 Replies View RelatedI have conditional statement {=SUM(IF('name of sheet'!$H$2:$H$226=H8,1,0))}
When ever I try to add a 2nd condition in using the wizard, I get incorrect results.
H8 is the cell that I want the calculation based on. How do I put on there that I want the calculation based on H8 or H9. If the answer is an easy one I apologise in advance. I'm a newbie to excel.
in A1 I have 57 in B1 I have 75 so if I calculate percentage between those two I should get somewhere around 5% instead I'm getting 76%,
what am I doing wrong, in C1 I have =A1/B1 and then formated under percentage.
I really didn't want to create this thread, but this is really bugging me and I have had asked for assistance with this. I have tried to bump this in March and again last week, I have given more than 48 hours for a response, but I am seeing that the view counter is increasing so slowly, it was at 84 when I 'bumped' and I am not sure if someone is able to help me as the thread is moving further down the line.
I have not had any trouble with what I have used in over a year, I have had used Vlookup religously for 2 years, and for the last 3 months, I have encountered this problem. Didn't think anything of it the first time it happened. It was explained that there was a space in the cell, which is why the formula did not find it. What's strange is that it only happens on one cell. I haven't determined if it is the exact same cell reference, but I am researching that.
The formatting is the same, in both sheets. Is there some way to vlookup look up the value of the contents as seen?
I have two columns. The first column has a list of names and the second a list of numbers:
A B
SMITH 4.6
SMITH 6.2
SMITH 1.1
JONES 5
JONES 12.2
I want to get the sum of all numbers next to Smith and the same for Jones (and so on). I can autofilter and manually sum each person, but there are MANY different names and this would take a long time to do manually. Is there a formula or vbscript that I can use to automate this so I have end up with:
SMITH 11.9
JONES 17.2
XXXXX xx.x
I haven't been able to find the answer to this here, nor have my own fumblings worked... I would like to have a formula to calculate the MEDIAN value of a column's visible cells - or a formula which will include the only cells meeting a certain criteria from another column.
For example...
Column O contains a list of countries: US, China, England
Column M contains the values: 1, 5, 10, etc
I would like the result of the MEDIAN formula to change based on the criteria selected in column O (so if I pick US, only the values associated with US lines are included).
I could probably put a button on the sheet and do something in vba behind the scenes, but the user is specifically asking for a formula so he can maintain it himself.
I have question on how to calculate the certain cells between 2 different worksheets based on the certain calculation parameters and the comparison result (the report) is put into the new worksheet on the same workbooks.
1) Worksheet1 contains: DEPTH, G1, C1, N1, D1, S1, SR1, MR1, DR1
2) Worksheet2 contains: DEPTH, G2, C2, N2, D2, S2, SR2, MR2, DR2
Expected result should be put in Worksheet3: DEPTH, G1, G2, calculation(G1 and G2), CI1, C2, calculation(C1 and C2), so on until the last columns. (find example on attached file "Test_Data.xls)
What I have done is to create a template to be filled in by copy and paste DEPTH, G1, G2 on worksheet1, DEPTH, C1, C2 on worksheet2, so on (attached file "Template_QC.xls"). Then I create a calculation macro for each of those worksheets separately to calculate the difference and color them . The calculation macro that I used is as follows:
I want to calculate how many cells are filled with color, how can
View 3 Replies View RelatedA range of cells is populated by numbers and formatted as such, some of those cells contain zeros. How do you calculate a range of cells without the zeros in the range? The zeros skew the results.
View 5 Replies View RelatedI have no experience with VBA programming. I am currently trying to create a function that sums the cells that have a specified background color applied by conditional formatting.(ie red)
I have tried working off an example that was displayed below
http://www.cpearson.com/excel/CFColors.htm
I am trying to create a workbook that calcualtes the sum of selected cells from another workbook. I have quite a few formulas, so i would like to use the fill command to help. I cannot get excel to pick up the pattern so I can use the fill formula. The pattern is as follows.
Sum(n5:n11)
Sum(n12:n18)
Sum(n19:n25)
Sum(n26:n32)
etc.
I would like to ask the formulas for this... for example:
$35 .. discount 10% + 25%
instead of having so many cells to calculate $40 x (100%-10%) = $36
$36 x (100% - 25%) = $27
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
[url]
In the above, i am trying to calculate the time taken between queries. I do not want any times/queries that are from someone else on the network to be counted.
I need something to ignore the blank cells, and take data from the next cell above which has data. I3, I8 and I14 are currently the trouble spots, and should be displaying 00:00:00, 00:04:00 and 00:06:00 respectively.
Note that someone from the network could have literally thousands in a row before I perform another query, not just alternating like the screenshot.
B is the real life time the query was performed. F is how long the query took. F does not take in to account the seconds between queries, which build up, so i am using B.
In the Wheelchair 1, 2, 3 & 4 sheets in the attached workbook, I would like to do a simple calculation of the contents of column 'H'. Instead of it adding up to just a few £'s I'm getting the result of something like -£5880.00. I think I know whay is wrong, but I don't know the solution to it. Column 'H' populates when a date is put into Column 'E' So if cells if cells in Column 'E' are empty then column 'H' doesn't do the sum.
What I think I need is a bit of formula to put into column 'H' to tell it to ignore blank spaces and count what is there.
Wheelchair Hire-Sample New (1)(1) (2).xlsm‎
So I'm trying to create a macro that will simplify dealing with a file we receive at work pretty often. I've enclosed a spreadsheet that shows a very basic example of the files we receive. What I need to happen is this: On the rows that have only the Company # in column A and Total $ in column D (ie. rows 5 and 6), I need the Total $ amount moved up one row and then for the row it was previously in to be deleted (at that point that row should only have the Company $ and no other data in it so it's basically useless). The problem I'm having is that if any rows are added to the file (for instance if an row was added between rows four and five) it would throw off my macro.
View 3 Replies View RelatedI want to obtain from some elements the number of cells it takes to appear:
We have for example A,B,C, and D,
and they appear in the next order:
1A
2C
3D
4A
5D
6B
7C
8A
9A
What I want to know is how much last in appear each element.
1A1
2C2
3D3
4A3
5D2
6B6
7C5
8A4
9A1
For example, the first “A” last one in appear, but the next element “C” last two in appear. In the forth line again cames the “A”, then are three cells. The “C” was in the cell2, and cames again in the seventh cell, then it takes five cells. In the cells eight and nine are two “A”, then in the cell nine takes one cell in appear again.
I'm working in excel2007:
I want to write a generic formula to calculate the difference of time between cells, the first being a real data point, such as
6/22/2007 8:53
minus a generic constant term using the same date and a given time, 8:30.
So, what I need is something like this:
6/22/2007 8:53 – (same mm/dd/yy @ 8:30)
6/22/2007 12:29 – (same mm/dd/yy @ 8:30)
6/25/2007 11:19 – (same mm/dd/yy @ 8:30)
I have a long list or work items that I track on a log on daily basis.Some work items are repeated twice or trice to input a certain comment.Therefore, when I try to calculate the total number of work items for the day using counta formula, if results in an inaccurate total since certain work items are repeated twice or trice. The work items consist of a 8 digit number.Example 8876098.
View 4 Replies View Related