Is there a way to use a for next loop to open a workbook that is in a folder, then save and close the workbook then open the next workbook in the folder and do the same routine till all the workbooks have been updated?
I have up to 50 workbooks in one folder with data in a specific range. I also have one workbook which includes additional data, including conditional formatting and dropdowns. I need to copy the desired range from the first workbook in the source folder to the second workbook, then save the latter to my destination folder, using the same name as the first. I need to repeat this process for all workbooks in the source folder.
I am trying to come up with a macro that is able to open a .htm file in Excel, perform a set of code, close the file, then repeat the process with the next .htm file in the folder. I found the following post which has helped me thus far, but there is something that is not allowing Excel to open the .htm files even though there is no problem opening them in Excel manually or with another macro I've made. Here is the link to the set of code I'm currently working with:
I've put some .xls and .csv files into the target folder and the program works perfectly which tells me Excel is having a problem with the .htm format for some reason. Here is the set of code I currently have which I have slightly modified for the new file format:
Is it possible to have a text box and a macro button that when a user enters a name of a folder (or part of the name) on say the c: drive it takes you there? Example being i have a folder called Alcan Inc on my c: drive, so i type in the text box alcan and click the macro. it then opens a windows explorer screen with the folder open.
I have a spreadsheet that I need to open two other workbooks to copy and paste data from.
The name of the two workbooks changes each day, and the location because they are filed in subfolders.
I have the following code, which works to open the first sheet but then comes up with the following error when trying to open the second sheet. "Run-time error '1004: Excel cannot access 'Hub PVA'. The document may be read only or encrypted".
The folder is not encrypted because when I was only opening the second document with the same code, it worked.
The code I am using is: 'DECLARATION On Error GoTo ERR1: ChDir "G:GENERALTRANSPORTDAILYPLANS" Workbooks.Open Filename:="G:GENERALTRANSPORTDAILYPLANS"
I am making a macro and I need to extract some data from workbooks. However, I have many workbooks and it would take time to the macro to open and analyze each of them.... is it possible to work with workbooks without opening them?????
For instance, I need to open a workbook and get all rows that contain the word HEXXX..... However, I have about 30 workbooks and it would take forever...
I have a Sharepoint site which seems to be set up incorrectly as I cant even do a webquery with it, or sync Excel with it.
I want to be able to open up the Excel workbooks held in this one dir within Sharepoint take some data out of it pop it into another Excel workbook and move on down to the next one!.
So far all the code I have managed to locate causes errors, so I have managed to get a feed from the Sharepoint site which gives me a hyperlink to all the docs (as these can change). What I now need is some code to run through all the hyperlinks open the doc (if it ends in xls or xlsx as some are PDF's!) take the info copy it out and move on to the next one.
What I'm trying to achieve.I'm trying to create a toolbar to have visible in excel which provides me with shortcuts to a selection of functions and some other useful documents.
I've created a document "Toobar 1.xls" in column B of which I have the file locations of the documents I want to open, the documents are moved from time to time and it is easier for other users to update the spreadsheet than vb.As you can see below I've written a piece of code to open up a document, I've created a function because there are a few documents I want to create links to and thought it would be cleaner to do it like this. This code is stored in "Module1" of "Toolbar 1.xls".
I've then created a new toolbar in excel and added a custom menu item and allocated it the macro "Pension_Credit_Calc".
When I run the code from within "Toolbar1.xls" it works fine, however if I try to run it from another workbook I get "run time error 1004". I suspect it's probably something to do with where I've stored my code,
PS. The reason I have not simply created a shortcut in the quicklaunch bar is that I will also be altering the workbooks once opened.
VB: Function OpenUp(FileLocation) As String Workbooks.Open (FileLocation) End Function [code]....
I would like to read data from Worbooks through VBA code and UserForm without opening them. Is it possibe?
I know I can read data from Workbooks without opening them if I write this formula directly into a Worksheet cell:
='C:Documents and SettingsUserNameDocuments[FILE_NAME.xls]Sheet1'!$A$1
The problem is it won't work for my task. I just need to analyze with UserForm Controls and For Each loops through many cells and many big Workbooks.
If I try:
Private Sub UserForm_Initialize() Dim aaa as String aaa = 'C:Documents and SettingsUserNameDocuments[FILE_NAME.xls]Sheet1'!$A$1 End Sub
Without opening the file if I try:
With Workbooks("C:Documents and SettingsjohnMy DocumentsmProjectfilename.xls").Worksheets("sheet1") For Each thing ... .... Next End With
In both cases it gives me - Compile error: Syntax error, Expected expression.
I can also say that I definately don't mistake path, workbook's or worksheet's name ------------------------
If you're not quite sure that my explanations are clear I wrote some more below:
Reasons i want this: It's just a lot of traffic/memory to Open/Activate/Close many Workbooks/Worksheets from 10MB files for just taking one or a few values to an UserForm :->
What I do: I'm using several Workbooks to manage data. One of them consists of the Macro code (ThisWorkbook.) and the rest of the Workbooks are just tables with data I use. On UserForm with controls such as (ComboBoxes, CommandButtons, ListBoxes, Labels etc.) I find, visualize, compare and copy just the data I need from other Workbooks to ThisWorkbook(on a new worksheet) :->
The idea of my task is: 1. I have 10 files, each of them 10-20MB with data. 2. Now, I'm making 1 file with VBA code which analyse these 10 files and displays the information in it.
The general idea is that these 10 files are well structured but have many columns and rows and it's not convinient each time I need to find 3 numbers I need to open 10MB file, scroll 5 minutes, copy/paste the numbers, close the file...i just want an UserForm with several controls to do this job
Each of these 10MB files consist of let's say about 10000 rows and 100 columns. Between these rowns and columns there's data (or empty cell). Everytime I use one of these files I need different information. So, if I use the formula you gave me, I should copy exactly the same Workbooks in one file but with formulas.
With the macro code I just go through these rows and columns and find the specific data I need with For Each loops. Everytime I need different data. With 4 ComboBoxes I just select an year, a name, a code (by rows) and another code (by columns) and I get the needful info.
This info could be in one file, could be in many files, it could be in HZ45 cell (file 1), it could be in C5 cell (file 2), the next time I would need file1,2,3,4,5 with cells GF45, J7, KK88, DR8, Y90 etc. etc. etc. So, the problem is that every time I need different information from these 10MB files, each of them consist of 10000*100 cells*10 files = 10 0000 000 cells which I have to write the formula you gave me and it will become one 100mb excel file, which is no good.
I have 2 workbooks open and I want to set up formulas from one linking to the other. When I toggle on the task bar between the 2 workbooks they replace each other within the same window so I can only see one workbook at a time. How do I set it up so I can have 2 separate windows open at the same time, one with each workbook in it? I tried 'side by side' in one window but the viewing area is too small.
I have a problem when opening Excel work books, The Personal file will not open automaticly. The file is in the XLStart folder. The link is "C:Documents and SettingsUSERApplication DataMicrosoftExcelXLSTARTPERSONAL.XLS. I have a desk top short cut I need to open first manually. Also the menu bar short cuts I had to my VB code and Macros will not work. Any body have any ideas what the problem may be? Im sure its a simple link problem but I don't know where to look.
I'm trying to develop a macro to amalgamate some data on currency exchange rates that are stored in different files with the dates saved in the file's name. The code of the macro I recorded when opening an example of such a workbook is:
Work have just upgraded from 97 to 03 (very with the times ) and when opening multiple workbooks, 03 behaves differently.
With 97 I could select many sheets from the open window and excel would open them in alphabetical order. Now we've moved to 03, the order seems to be completely at random. It's a real pain, as the set up of the workbooks we use has everything linked together. In order to keep everything working sweet, various groups of workbooks need to be open at once. Previously it was easy to find a workbook in the task bar, but now they're scattered everywhere. We don't use a set list of workbooks - the selection we need to open varies quite a bit, but there's usually at least 20 or so.
End Sub SpreadsheetA.xls has a macro called "ExpectedRun" which is currently operated by clicking a commandbutton.
What is the code to run the "ExpectedRun" Macro in Sub OpenA?
Eventually I'll be opening a bunch of these workbooks, each with its own unique "ExpectedRun" macro, so is there any special command to call on the "ExpectedRun" macro for specifically the opened workbook?
I was wondering if anybody could catch an error in the following code. I have a file, let's call it a "Guide" which is opened by user and at this time this file has only one purpose - to help user choose the program. After clicking on the "Choose Program" command button, an Inputbox appears where the user types in a program. Then the code should open the file with this program and this is pretty much it. But something is not working with the code below, and I do not see anything wrong with it after looking at it for so long. It just does not do antthing. how to handle the "Choosing" option
Private Sub CmdBttn_ChooseProgram_Click() Dim sFilename As String On Error Goto ErrorHandler sFilename = "Approval_" & Application.InputBox("Input Program") Workbooks.Open Filename:="C:Documents and SettingsjsmithDesktop" & sFilename & ".xls" ErrorHandler: 'if file name does not exist error message should display. Not defined yet End Sub
I have a macro that opens all workbooks in a folder and searches for a few terms returning the appropriate rows, my problem is that someone has decided to protect some of the sheets so when the files are opened you get the password box popup. I have added the (filename, readonly) segment however this has not solved the issue, the macro displays an error stating a workbook is open.
Is there any way to resolve this without unprotecting the sheets?
I have a series of workbooks created by my salesforce (from a master template that I created for them) which they then place into a folder for me to extract data and upload that data to SAP. I am writing a procedure, therefore, to do just that.
Essentially, I would like to open the file containing the data, extract what I need and then close it. I can do that. THEN, I want to move each data file to a folder (which would depend upon the data within the file) as part of the whole procedure. I can define the new path, but I don't know how to move the book.
In creating the master template of the data files, I built into it an auto-name-creation procedure which defines the name of the file that they create. This enables me to write a procedure to work out the file to open. In order to do this, I disabled the save function (but password protected it so that I could make changes to the master template). As such, I am unable to use Save/Save As to move the data files.
I have a large number of files (100+) contained in a directory with multiple subfolders that need to be made read-only at the end of an excel macro. Because of said length, I believe (open to correction) that the SetAttr method would not work (as I do not know the individual file names). It is also necessary to preserve all of the original files' other attributes.
I have a whole group of workbooks. Is there a way to make a new workbook that will look in the folder containing all of the other customer's books and pull information from them? In other words, I want a workbook where in Column A would contain all of the Customer's Names (Cell Info!G6), Column B would contain the Insurance Company (Cell Info!M14), etc. Is there a way to to that?
I have several workbooks in a folder with sub folders. How can I get the values located in C6, E6 and E9 and put in a new workbook the "file name" in Ai and those 3 values in Bi, Ci and Di respectively? Itīd be desirable get the values without open the files.