Pass Chosen ListBox Item Number To Cell
Oct 5, 2007
I use the code below to enter a value from a list box in a cell on a workssheet. Is it possible to code VBA to enter a number for the position of the selection in the listbox to a cell in a worksheet rather that the actual value from the list box. For example if my list is:
Option1
Option2
Option3
And I click on Option2 in the list, I can sennd the value 2 to a cell on the worksheet rather that the value "Option2' from the list.
Private Sub ListBox1_Click()
Sheets("SA").Range("SA_Poistion_To_Archive_A_New").Value = ListBox1
End Sub
View 2 Replies
ADVERTISEMENT
Nov 6, 2006
I have a list of country names in a listbox that are populated using another worksheet that has these country names. When I make a selection in the listbox, I want the same country names to be highlighted in the worksheet. I will then be able to run a macro that takes those selected cells as input.
View 3 Replies
View Related
Nov 28, 2006
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
View 9 Replies
View Related
May 7, 2008
I have a set of data on excel and would like to make searching for it easier.
I have created a drop down list in cell B4 (say, "Banana", "Apples" and "Orange"). Is there a way that if i select "Banana" in cell B4, excel will automatically go to cell A20 ?
View 3 Replies
View Related
Dec 16, 2007
I am wanting to be able to change the data in a spreadsheet cell(s) using a visual basic form. I've attached my spreadsheet file, so that you get a better idea of what I'm trying to do. What I want to be able to do is, on the VB form, to be able to click on the list box to choose a client, then choose the module number (option box) next to it which will then show the client's marks for that module in the textboxes at the bottom of the form. Then to be able to change the marks that student has for that module. I've given it a lot of thought, but I'm really stuck at this moment in time.
View 7 Replies
View Related
Feb 12, 2009
I have sheets named exactly the same as the entries of a listbox. Now I want excel to copy the value located in e35 in the worksheet previously chosen.
I tried th efollowing, but this doesn't seem to work. I simply recorded a macro doing what I wanted it to do (orange) but replaced the reference to the sheet with what I thought would be the choice the user made (green)
Do While continue = vbYes
UserFormware.Show
Cells(16, 4) = UserFormware.ListBox1.Text
Cells(18, 4) = UserFormware.TextBox1.Value
Sheets("UserFormware.TextBox1.Value").Select
Range("E35").Select
Selection.Copy
Sheets("Calculator").Select
Range("E35").Select
Selection.Paste
If UserFormware.ListBox1.ListIndex = -1 Then
MsgBox "You must select an item"
End If
Unload UserFormware
continue = MsgBox("Do you want to add another warehouse?", 4)
Loop
View 9 Replies
View Related
Dec 19, 2013
I am coding a spreadsheet that makes extensive use of the excel dropdown list boxes. So I have codes such all over and it is not a neat way to code.
Code:
With Target.Validation
.Delete
.Add xlValidateList, 1, 1, Formula1:="1, 2, 3"
.InCellDropdown = True
.ShowInput = True
End With
As many of the dropdown list boxes are similar in nature, with the only exception that the list content is different, I wanted to code a sub routine to include the code above.
My subroutine looks like this now:
Code:
Sub listbox(cellref As Range)
Set Target = Cells(cellref)
With Target.Validation
.Delete
.Add xlValidateList, 1, 1, Formula1:="1, 2, 3"
.InCellDropdown = True
.ShowInput = True
End With
End Sub
The problem is that when I call the subroutine with a
Call listbox (10,10)
It kept giving me a compile error.
I would like to create a listbox at cell row 10, column 10 of the worksheet.
View 9 Replies
View Related
Dec 1, 2006
I am running a macro which ends up showing the save as dialog box. The name is correct (data) and the type is correct (XML files) but no matter what I try the file path is not right. Here is the section of
sDataFile = Application.GetSaveAsFilename("data.xml", fileFilter:="XML Files (*.xml), *.xml")
Set fs = CreateObject("Scripting.FileSystemObject")
Set js = fs.CreateTextFile(sDataFile, True, False)
Set f = fs.GetFile(sDataFile)
sFilePath = f.parentfolder & ""
Set f = Nothing
How do I set the file path? I have already seen lots of answers to this but they are based on changing the path permanently or on there being no dialog box already open. I need total automation with the user not being able to see any of the save process.
View 3 Replies
View Related
Sep 13, 2007
compare one coloum with another and return a corresponding value in the adjacent cell. For example
I have 4 colums A,B,C,D. In "column A" I enter Products names (Example- Apple, Orange..)and in corresponding Coloumn B, I enter Product Codes (01 for Apple and 02 for Orange etc..) When I enter Apple in coloumn C for 10 rows (C1 thru C10), I need to get Code 01 in Column D in all rows (D1 thru D10)
View 3 Replies
View Related
Jul 31, 2014
I have a Listbox (Listbox2) in column C. The listbox allows users to select multiple items (in this case it is countries). So the user could select 1 or 20 countries based on the previous criteria.
What I would ideally like is for the next column (column D) to automatically list the selected items without having to use a command button in the actualy cell. However, I could put a command button at the end to say "Confirm" which would then transfer the above into the relevant cells.
This is an excel file, and each row would works the same. Basically users are entering products for set up row by row, so the file could be 10 rows or 200.
Just to be clear, it would look a little like this:
Drop Down Listbox
Column C Column D
Canada (Selected) Canada, USA
South Africa
USA (Selected)
View 2 Replies
View Related
Mar 9, 2014
[URL]
I had this posted in Formulas and functions
View 1 Replies
View Related
Dec 28, 2006
I have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad)
this is the
Private Sub ComboBox2_Change()
If Sheets.Application <> "Materiales" Then
Sheets("Materiales").Select
End If
Range("H:H").Select
Cells.Find(What:=ComboBox2.Value, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
View 3 Replies
View Related
Jul 27, 2007
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start()
If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then
Call Find1
Call kTest1
End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then
Call Find2
Call kTest2
End If................
View 3 Replies
View Related
Mar 17, 2008
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
View 8 Replies
View Related
May 15, 2008
I have two comboboxs on a userform, both are populated like this:
(ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents
With Worksheets("Data")
Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp))
End With
With ComboBox4
.RowSource = rng.Address(external:=True)
End With
The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date
ComboBox4 is populated off of items from the data sheet
ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
View 9 Replies
View Related
Sep 8, 2006
Not overly familiar with ComboBoxes but what I want to do is load a ComboBox with data based upon the selection of another ComboBox
Please see attached example.
ComboBox1 - I can get to load.
ComboBox2 - I want to load but only those lines that match the above selection
TextBox - Load with the data on row selected by ComboBox2
View 9 Replies
View Related
Sep 27, 2007
Is it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
View 2 Replies
View Related
Oct 10, 2007
I'm trying to make a budget type spreadsheet for a club I run. I have a popup box where I click what was purchased, and now I want a drop down list of all the members of the club so that when I choose one name it is inputed beside what was purchased (I hope this makes sense !). I've managed to make a dropdown list in a dialog box but I don't know how to make it so that the name I choose is inputted into the spreadsheet.
View 2 Replies
View Related
Feb 2, 2008
I have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
View 2 Replies
View Related
Mar 13, 2008
Let's say I have pivot data in the form of:
| Major Category | Minor Category |
toys | balls |
toys | puzzles |
toys | blocks |
clothes | shirts |
clothes | pants |
I want to loop through every minor category and display it and its major_category on a different worksheet. (I'm doing more than this, but for simplicity sake ...
View 9 Replies
View Related
Apr 21, 2009
My attached files contains stock returns for companies. Each sheet contains the returns over a 5 year period for a certain stock, with the ticker symbol of the stock used as the sheet name. I want to write a sub that presents the user with a user form. This user form should have an OK and Cancel buttons, and it should have a list box with a list of all stocks. The user should be allowed to choose only one stock in the list. The sub should then display a message box that reports the average monthly return for the selected stock.
View 4 Replies
View Related
Jun 18, 2008
I am using a vlookup and have a problem. I am assigning a category to an item number based on the first two characters of the item number. For example item number 60123 would equal scrap because of the first two characters of 60. But the item number can begin with either a number or letter. Here is the formula I am using that works for item numbers that begin with numbers:
=VLOOKUP(VALUE(LEFT(E2,2)),Sheet3!A:B,2,FALSE)
It works fine until I reach a item number that begins with a letter, then I get the dreaded #Value error. If I take the value out of the formula then it works for the letter based number items but not for the number based item numbers.
View 9 Replies
View Related
May 23, 2008
I have a series of integer constants defined for the column offset to be applied based on the category selected by the user; there are 16 in total.
e.g.
Const Transfer_Offset As Integer = 19
Using concatenate and replace i have a variable named Column_Offset that = the string value of constant variables defined.
e.g. Column_Offset would contain the value Transfer_Offset
what I ams struggling to do, is to get the variable Column_Offset to contain the value of Transfer_Offset i.e 19
Ultimately this value would then be used in an activecell.offset(0, Column_Offset) to move the cell address to the required.
At present, using the above code gives me an error as VBA only goes down one level in the tier of variables and thus tries to offset the active cell by Transfer_Offset, not 19 columns as required.
View 5 Replies
View Related
Dec 8, 2006
I would like to be able to array (group) all the sheets in my workbook that are listed in a Multi Select ListBox on a userform. To be exact I would like to select the required sheets I want from listbox 1, add them too listbox 2, then array (group) all the sheets in listbox2. The code to add items from list 1 to 2 is below, but I am unsure of the code to then group the sheets in list 2
Private Sub CommandButton2_Click()
Dim iloop As Integer
For iloop = 1 To ListBox1.ListCount
If ListBox1.Selected(iloop - 1) = True Then
ListBox2.AddItem iloop
End If
Next
End Sub
View 2 Replies
View Related
Jan 15, 2008
I am trying to create a form where a user can click a button and add a document to a workbook. The file(s) can be hidden on a seperate sheet, but ultimately should be displayed in a List Box or Combo Box. Not sure which would be better in this case. Selecting the item from the list would open the document (either through a double click functionality or a seperate button). I have the beginning of the code below.
Private Sub AddFile_Click()
Dim vFile As Variant
vFile = Application. GetOpenFilename("All Files,*.*", Title:=" Find file to insert")
If LCase(vFile) = "false" Then Exit Sub
Sheets("RefrenceSheet"). OLEObjects.Add Filename:=vFile, Link:=False, DisplayAsIcon:=False, IconLabel:=vFile
End Sub
View 3 Replies
View Related
May 7, 2008
I have a master spreadsheet that contains 3 different tabs (A, B & C) for 5 countries (UK, USA, IRE, JAP & ARG) - so 15 tabs in total.
Every month, I need to create 5 separate spreadsheets from this master spreadsheet - one for each country. Each separate spreadsheet must contain tabs A, B & C for each country.
I have written a macro that performs this perfectly, but I now need to be able to chose which of the tabs (A, B & C) are included in the separate spreadsheets - as they will not all be needed every month (some months I might only need tabs A and B by country, other months - just C, other months - all three)
I would like to include a form containing a tick-box list so the user can tick which of the tabs A, B & C are copied each month.
View 4 Replies
View Related
Feb 26, 2014
I am hoping to create a drop down list of months in one sheet, and when I select a certain month, columns in about 10 other worksheets in the same workbook will either hide or unhide columns...
The spreadsheet is laid out with columns (C-N) for each month in the year, for actuals, then columns for budget and budget variance (O-P), then YTD Actual, YTD Budget and YTD Variance. When I select September, for example, I want October-December to hide, and leave Jan-Sep unhidden, while keeping the budget, YTD and variance columns.
Is there a VBA code that can achieve this?
View 14 Replies
View Related
Mar 2, 2008
I want to do is to use a listbox userform control to navigate between sheets. Each listbox item is the name of a location, which can be dynamically created/added (by other means). Clicking the listbox item activates the corresponding sheet.
however, depending on the user-mode of the application, if the user navigates to another location, then they must return to the location from which they navigated. here's an example to make it clearer
0) user form initializes, populates Listbox = ( Loc1, Loc2, **Loc3** ) {asterix means 'selected/highlighted'}
1) user clicks 'Loc1': sheet for loc1 is activated; repopulate Listbox= (Loc3) {as must go back to from where user came}
2) user clicks 'Loc3' to return to last location: sheet for loc3 is activated; repopulate Listbox = (Loc1, Loc2, **Loc3**)
i have gotten it all working fine, except that for some reason in Step #2 (the return to initial sheet & items) neither.......
View 2 Replies
View Related
Aug 15, 2008
Following statement works for me:
bdcTerm1 = ThisWorkbook. Sheets("ws2"). Range("A1").Value
But instead I want to parse through 50 rows and dynamically get the value instead of using a static Range("A1"). So I am trying to do the following:
For Row = 1 To bdc_rows
bdcTerm1 = ThisWorkbook.Sheets("ws2").Cell(Row, 1).Value
bdcTerm2 = ThisWorkbook.Sheets("ws2").Cell(Row, 2).Value
Next Row
But I get errror.
View 5 Replies
View Related
Mar 18, 2008
I am trying to create a data entry form with a text field and a listbox. The list box is populated by another sheet and the text box will be used to enter names. I need to be able to enter a new name, select multiple options from the list box and then click a button to add this info to a sheet in excel.
I have read about changing the list options to allow this etc - the problem is I can't get the results to go back into excel - all I get is a name with nothing from the listbox.
View 4 Replies
View Related