Calculate Average Based On Item Chosen From List
Apr 21, 2009
My attached files contains stock returns for companies. Each sheet contains the returns over a 5 year period for a certain stock, with the ticker symbol of the stock used as the sheet name. I want to write a sub that presents the user with a user form. This user form should have an OK and Cancel buttons, and it should have a list box with a list of all stocks. The user should be allowed to choose only one stock in the list. The sub should then display a message box that reports the average monthly return for the selected stock.
View 4 Replies
ADVERTISEMENT
May 7, 2008
I have a set of data on excel and would like to make searching for it easier.
I have created a drop down list in cell B4 (say, "Banana", "Apples" and "Orange"). Is there a way that if i select "Banana" in cell B4, excel will automatically go to cell A20 ?
View 3 Replies
View Related
Feb 26, 2014
I am hoping to create a drop down list of months in one sheet, and when I select a certain month, columns in about 10 other worksheets in the same workbook will either hide or unhide columns...
The spreadsheet is laid out with columns (C-N) for each month in the year, for actuals, then columns for budget and budget variance (O-P), then YTD Actual, YTD Budget and YTD Variance. When I select September, for example, I want October-December to hide, and leave Jan-Sep unhidden, while keeping the budget, YTD and variance columns.
Is there a VBA code that can achieve this?
View 14 Replies
View Related
Mar 9, 2014
[URL]
I had this posted in Formulas and functions
View 1 Replies
View Related
May 15, 2008
I have two comboboxs on a userform, both are populated like this:
(ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents
With Worksheets("Data")
Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp))
End With
With ComboBox4
.RowSource = rng.Address(external:=True)
End With
The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date
ComboBox4 is populated off of items from the data sheet
ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
View 9 Replies
View Related
Sep 8, 2006
Not overly familiar with ComboBoxes but what I want to do is load a ComboBox with data based upon the selection of another ComboBox
Please see attached example.
ComboBox1 - I can get to load.
ComboBox2 - I want to load but only those lines that match the above selection
TextBox - Load with the data on row selected by ComboBox2
View 9 Replies
View Related
Sep 27, 2007
Is it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
View 2 Replies
View Related
Jan 14, 2008
I am trying to use combo box to display my data, here are the details. I am having 20 Departments, and have Budget and Actual values for those Departments for each month for the year 2008, tell me the logic to use combo box as dropdown list for Dept. and how can i get values in first 5 to 10 rows after changing the Department in Dropdown list(Combo Box)
View 5 Replies
View Related
Jun 9, 2009
say i have a range of name called Red_Fruit, Blue_Fruit
and i have a box to input the color of a fruit
I want to be able to select a list of fruit based on the color chosen
How would i call back the name if only part of the name changes?
View 6 Replies
View Related
Feb 6, 2008
If a specific word is entered in a cell I want a list to show in another cell. This is better explained in an example. In cell A2 I have a validation list of names, eg. Mary, Mary Birth, John, John Birth,. . .) In cell N2 I have another validation list of places , eg. Ireland, England, Wales, USA, Scotland, . . )
In A2 if a name with Birth is chosen then I only want them to be able to choose from Ireland or England.
View 2 Replies
View Related
Mar 17, 2008
See attached spreadsheet, in sheet 1, yellow columns are for restricted cells and Sheet 2 contains the lists for such columns' validation range. Sub-Strategy is dependent on the choice made from Main-Strategy, e.g. if Main-startegy = EquityHedge, then the choices for sub-strategy can only choose Long Biased, Low Beta & opportunistic. But I also have a "Other" category under Main Strategy, Sheet 2 cell G1, if this is chosen then I would like to remove the data validation in the sub-strategy column, (i.e. u can input anything for sub-strategy) how can I do this?
View 2 Replies
View Related
Apr 25, 2008
I am attempting to populate a row of several cells on a worksheet using a drop-down list, using data from a seperate worksheet in the same workbook. The worksheet containing the data will be hidden (I do not think that matters in this case). Do I place a VLOOKUP function in the first worksheet cells? see attached sample
DropDownSample.xls
As a follow-up question, as time goes by, the data in the source worksheet will be appended with new items (additional rows of data). As each new item is added, will I need to edit the formulas, or is there a way for Excel to dynamically add the new data? This might be stretching my wish list a bit but I thought I'd ask.
View 3 Replies
View Related
Sep 13, 2007
compare one coloum with another and return a corresponding value in the adjacent cell. For example
I have 4 colums A,B,C,D. In "column A" I enter Products names (Example- Apple, Orange..)and in corresponding Coloumn B, I enter Product Codes (01 for Apple and 02 for Orange etc..) When I enter Apple in coloumn C for 10 rows (C1 thru C10), I need to get Code 01 in Column D in all rows (D1 thru D10)
View 3 Replies
View Related
Jul 2, 2014
I need VBA code to do the following:
When cell H2 = "Weekly", I need cell I2 to return "50".
When cell H2 = "Bi-weekly", I need cell I2 to return "25".
The value in Column I should change as soon as the value in Column H changes.
NOTE: The value in Column H is chosen from a Data Validation List.
I'm assuming offset is the best option?
View 7 Replies
View Related
Jan 28, 2012
How do you calculate the average of the last 20 values in a dynamic list? The list is in column A and updates every day by adding a new value in column A.
View 3 Replies
View Related
Dec 28, 2006
I have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad)
this is the
Private Sub ComboBox2_Change()
If Sheets.Application <> "Materiales" Then
Sheets("Materiales").Select
End If
Range("H:H").Select
Cells.Find(What:=ComboBox2.Value, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
View 3 Replies
View Related
Jul 27, 2007
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start()
If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then
Call Find1
Call kTest1
End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then
Call Find2
Call kTest2
End If................
View 3 Replies
View Related
Mar 17, 2008
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
View 8 Replies
View Related
Mar 15, 2014
I would like to calculate the moving average for the first ten rows in a column where each new entry is added to the cell above the last entry.
For example
A5, 2
A6, 3
A7, 4
A8, 5
A9, 6
A10, 7
A11, 8
A12, 9
A13, 10
A14, 11
A15, 12
Therefore in the current list the average is AVERAGE(A5:A14)=6.5.
The next entry added to the list will be in cell A4 making the list look like this
A4, 1
A5, 2
A6, 3
A7, 4
A8, 5
A9, 6
A10, 7
A11, 8
A12, 9
A13, 10
A14, 11
A15, 12
The average of the first 10 cells is now AVERAGE(A4.A13) = 5.5
I would like to enter one formula in say cell A1 that will calculate the moving average in the first ten cells each time a new entry is added. Naturally as needed, new rows are added below cell A1. I hope my problem is clear.
as I have been unable to solve it myself. I have tried using offset but have been unable to resolve the issue.
View 2 Replies
View Related
Jun 2, 2006
I will do my best to explain but just in case I have attached a worksheet to make things easier. I have a list of a few thousand products with data on each product. When I run through a series of cuts, I get a subset list and want to be able to calculated a weighted average by somehow saying to do a weighted average (and/or count, and/or average, etc.) on the characteristics of only the products in the subset.
View 9 Replies
View Related
Nov 6, 2006
I have a list of country names in a listbox that are populated using another worksheet that has these country names. When I make a selection in the listbox, I want the same country names to be highlighted in the worksheet. I will then be able to run a macro that takes those selected cells as input.
View 3 Replies
View Related
Nov 28, 2006
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
View 9 Replies
View Related
Oct 10, 2007
I'm trying to make a budget type spreadsheet for a club I run. I have a popup box where I click what was purchased, and now I want a drop down list of all the members of the club so that when I choose one name it is inputed beside what was purchased (I hope this makes sense !). I've managed to make a dropdown list in a dialog box but I don't know how to make it so that the name I choose is inputted into the spreadsheet.
View 2 Replies
View Related
Feb 2, 2008
I have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
View 2 Replies
View Related
Mar 13, 2008
Let's say I have pivot data in the form of:
| Major Category | Minor Category |
toys | balls |
toys | puzzles |
toys | blocks |
clothes | shirts |
clothes | pants |
I want to loop through every minor category and display it and its major_category on a different worksheet. (I'm doing more than this, but for simplicity sake ...
View 9 Replies
View Related
Oct 5, 2007
I use the code below to enter a value from a list box in a cell on a workssheet. Is it possible to code VBA to enter a number for the position of the selection in the listbox to a cell in a worksheet rather that the actual value from the list box. For example if my list is:
Option1
Option2
Option3
And I click on Option2 in the list, I can sennd the value 2 to a cell on the worksheet rather that the value "Option2' from the list.
Private Sub ListBox1_Click()
Sheets("SA").Range("SA_Poistion_To_Archive_A_New").Value = ListBox1
End Sub
View 2 Replies
View Related
Nov 7, 2008
http://home.comcast.net/~unkerjay/CSBG_Sheet.xls
in it, there's a Sheet named:
CSBG Report
which has a drop down list for all possible reports
beginning with "Jan".
There's also a "Totals" sheet which has the corresponding
information for each report totaled in separate columns.
Jan, for instance is totaled in column B.
Feb, is totaled in column C.
And so on.
What I'd like to be able to do, is, depending on
the report selected, to have the information in
the corresponding cells in the "CSBG Reports" Sheet
pulled from the appropriate column in the "Totals" Sheet.
So far, I'm not wrapping my mind around a way to
do this.
View 9 Replies
View Related
Jan 22, 2010
Worksheet 1
I am calculating group averages for the following performers - very good, good, average, low, very low - for a series of factors.
Worksheet 2
Contains the same factors with the values for which Im trying to work out the average. Each factor has a performance rating above it, either very good, good, average, low, very low.
I need a formula which will match the performance rating from worksheet 1 (I3, J3, K3, L3, M3) to worksheet 2 and then calculate the averages of each factors based on those matches.
View 10 Replies
View Related
Nov 23, 2009
I have 3 sets of data for two different groups:
Group 1 - Inbound
- Total volume
- Gross adds
- Win rate (gross adds/total volume)
Group 2 - Outbound
- Total volume
- Gross adds
- Win rate (gross adds/total volume)
I need to calculate the weighted average of the win rate based on volume of calls. Is there any way to do that?
View 6 Replies
View Related
Aug 1, 2014
It's probably best if you open up the attached example spreadsheet that contains sheets "Before" and "After" otherwise it might be pretty difficult to understand what I'm talking about.
So I have this spreadsheet where I have part numbers in column B, status of the orders in Column I and lead times in Column M. What I want to achieve is to get of Mode (col N), Median (col O) and Average (Col P) values of each part number and each of its status using the lead times in Column M. If possible I would only like this on the top lines of each of these. I have done the formulas manually on sheet After so if you click on the formula you can see the range's it covers.
I did create a concatenation in column K (conc of column B and I) as helper column because in theory this might make things a little bit easier.
Now going into second part. I would also like to do something very similar but only using the part number and status "Finished" and get the values in columns T,U, and V on the top row of each part number. I made some blue boxes and arrows to kind of point out the idea.
The solution can be either formula based or macro, it really doesn't matter, however I will intent to use it within macro either way.
View 2 Replies
View Related
