I have below code:
Code:
myRange = Range(Cells(5, 18), Cells(dRow, 30))
For Each cell In myRange
If IsError(cell) Then
cell = ""
Else
cell = Round(cell, 3)
End If
Next cell
Range(Cells(5, 18), Cells(dRow, 30))= myRange
The problem is that the range does not change after I paste modified array back to it.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I want to know how to copy a range into an array then an array back into an range.
Code:
Dim a(3,3) As Double
a(3,3) = Range("C3:E5")
Range("C10:E12") = a(3,3)
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
currently i am using
Range("A1").Resize(Len(sChars) ^ iChars).Value = saPermut
what would be a way to do this when the value exceeds 65536?
perhaps to go on to the next column?
I have a sheet ("ORDEM"), i need paste values in sheets V1, V2 ...V5, but change array.
Look my file, i make manual result in V1
I wonder whether I'm using the code below to copy data from two 'Source' sheets to one 'Destination'.
[Code] .......
The code does copy and paste the correct inofrmation, but the problem I have is that the data from the latter sheet i.e. "IDEAS Actuals" overwrites the data from the "IDEAS Forecast" sheet.
How I would be able to change this so the data is copied underneath each other.
The code below pastes an array formula on the given range. However, it results FALSE and it does not paste as an Array formula. How can I fix it?
Sub copy_Time_Spent_by_Ticket_Formula()
Dim SheetName As Variant
For Each SheetName In Array("Calculations")
With Worksheets(SheetName)
[code].....
I have a worksheet "Expenses" with columns Month, Category, Expense, Amount. There are four categories and, obviously, 12 months.
In the workbook is another worksheet, "Totals" which lists the months across the top, and the categories down the left. Then I have array formulas in each cell, that look like this:
=SUM(IF(Expenses!$B$2:$B$990="July",IF(Expenses!$C$2:$C$990="Acquisition",Expenses!$E$2:$E$990,0),0) )
This works fine, until people start moving cells around in the Expenses sheet. Say they sort everything they've put in by month, and then they want to move July up to the top because it's the start of our fiscal year. So say they have six expenses for July and they cut and insert them in at B2. Suddenly the formula now says:
=SUM(IF(Expenses!$B$8:$B$990="July",IF(Expenses!$C$8:$C$990="Acquisition",Expenses!$E$8:$E$990,0),0) )
I thought by using absolute cell references instead of relative ones, I could avoid this problem, but that's apparently not the case. I tried changing the cell references in the formulas to relative ones but it still happens then too.
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedTo initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedI have data in a spreadsheet that I would like to send to another sheet as follows:
Use the values in the range $D$2:$D$12 and $F$2:$F$12 to reference the column and row of a cell and the values in the range $G$2:$G$12 to reference a specific group of cells on another sheet into which would be inserted the value found in the range $C$2:$C$12. The best I have come up with is to place a formula in each of the cells in the second sheet that would state:
IF a value in the range $D$2:$D$12 matches the column # of the current cell AND IF the corresponding value in the range $F$2:$F$12 matches the row # of the current cell AND IF the corresponding value in the range $G$2:$G$12 matches the region of the current cell THEN the value of the current cell EQUALS the value of the corresponding cell in the range $C$2:$C$12.
I think this will work but I don’t have enough knowledge of Excel to write this formula.
This code works!
Dim rTmp As Range
Dim aTmp As Variant
Set rTmp = Range("A1:D21")
aTmp = rTmp.Value
Range("A1:D21") = aTmp
If you exchange Range("A1:D21") with rTmp.value it does not, why?
This code doesn't work?
Dim rTmp As Range
Dim aTmp As Variant
Set rTmp = Range("A1:D21")
aTmp = rTmp.Value
rTmp.Value = aTmp
Attached file should be self-explanatory.
I want to be able to set sum range using lookup or match.. For example if I change B2 value to Nov-13, I want it to sum column K.
I have a table that looks like this:
| A | B | C | D | ...
1 | fu | bar | lab |...
2 | rab| uf | luv |...
3 |...
All of my values are within the Range "A1:C2"
I would like to have a variant array which contains the addresses of this range.
Things I tried that didn't work:
If my variant is V and my range is R,
v = r returns an array which contains
fu|bar|lab
rab|uf |luv
V = R.Address gives me
A1:C2|A1:C2|A1:C2
A1:C2|A1:C2|A1:C2
What I actually want:
A1|B1|C1
A2|B2|C2
i know this can easily be done with a loop, but the table I want to use this on is huge, and a loop takes hours to execute.
Hi all, starting this as a new problem because it's so far different from what I was originally talking about; but this does relate in part to my previous thread.
Anyway. I'm trying to set an array to set Range objects so that I can define each one as a seperate With block. Here's what I "know" when starting out.
I developed the following. I keep thinking it should be multidimensional but my sleep deprived brain came up with this instead. The problem is, it's throwing a 1004 Method "Range of object '_Worksheet'" failed at the With statement.
I am trying sort a bunch of different ranges. So I am trying to use the same sort code but run an array of ranges through. This code is for only two ranges
CA3:CD200 and CF3:CI200. I want to pass the ranges as variables through the sort code but I cannot get it to work.
Through VBA is it possible to give a range of cells that should be converted to array formulas? As part of my macro I am copying a sheet from one book to another. This sheet contains a lot of formulas and so as not to keep the reference of the old book I find and replace "=" with "#" and then swap them back after the move. This works fine for all normal formulas but not the Array formulas.
If someone could tell me how to give and range and convert them all to arrays or can think of a better method of moving a sheet from one book to another without the formulas keeping the references to old book.
I have created several functions in VBA that operate on arrays created by other functions in VBA, however they don't recognize cell ranges as arrays. For example, the UBound function doesn't work with a range argument within my function.
How can I get my functions to recognize cell ranges as arrays, as well as arrays that I have created directly in VBA?
I am trying to set an Array to prompt user with a series of questions and input answers into a specific row. However, I want to skip over certain columns and leave those blank. How would I modify my code to do this?
Code:
Private Sub CommandButton2_Click()
Dim ArrQues() As Variant
Dim ArrInput(2) As Variant
Dim lngLstRow As Long
Dim strPNfromSales As String
ArrQues = Array("Enter the Part Number.", _ "Quantity Being Returned?", _ "What is the Reason for Rejection?")
For b = LBound(ArrQues) To UBound
[Code]...
I want the first two questions to be input into Column B & C, but then the third question to be input into column I.
I have a quick question in relation to filling a range with an array.
When I use the following code:
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:C1") = s
End Sub
It works fine. but when I try to populate the range in rows instead of colums, the array value stays as the first value.
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:A3") = s
End Sub
I'm experimenting with arrays and would like to get better at them, but this has me stumped for the moment. How to get the values to work going down, like they do going across.
The above code is a small sample of data, I am wating to replicate with using over 80K lines and cell by cell is too slow.
Is type-casting possible in Excel ? For instance, can i typecast an array into a range, and vice-versa ?
View 6 Replies View RelatedIn a Worksheet named "Input" and in Cells "B3:G?" I have 6 number groups. How can I ...
( 1 ) Put each of the 6 number groups into an array when I don't know what the last row number is.
( 2 ) Find the maximum value in any of those cells and attach it to a variable named MaxVal.
... so once I have done this I can then loop through each 6 number group and perform some calculations.
In a worksheet is a table:
a b c d
e f g h
i j h l
m n o p
q r s t
I'm looking for a procedure to (with the help of
an array) reproduce this table exactly under the original one
with one row between them but in the folowing form:
q m i e a
r n j f b
s o h g c
t p l h d
the procedure should be applicable on any haphazard
regardless of its place on a worksheet
i want to understand the difference between array and range i feel this is misleading ,,
View 9 Replies View Related
