Paste Column Of Cell Text As Comment
Feb 17, 2014I'm trying to copy and column of text (R4:R300) and paste the text as comments in the previous column (Q4:Q300).
View 3 RepliesI'm trying to copy and column of text (R4:R300) and paste the text as comments in the previous column (Q4:Q300).
View 3 Replieshow to copy the contents of multiple comment boxes and paste in a single comment box.
The big picture is that I have a number of cells with numerical values in and text in comment boxes. I want to be able to click a button to copy the contents of the comment boxes and paste them, along with the numerical value from the cell, into a single comment box, ordered by highest to lowest value within the comment box, then delete the original cells and comments.
I am quite new to VBA but have been coping quite well so far with information of the web and analysing recorded macros.
I am working on a database and trying to remove duplicates. When there are duplicates, I want to take the contents of one cell and copy them as a comment on the cell above (or below).
I tried to work on a small macro to do so, but the contents of the cell cannot be copied (it comes out as a blank).
The long way is to 'double click' in the cell, Ctrl+A, cut, click the cell above, Ctrl+F2, paste. This way is very long as I have thousands of duplicates.
I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
View 14 Replies View RelatedI have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
I've look the properties of this to objects and can figure it out.
if choose a cell then the code works fine, but when i choose a selection of cells
(ex. A1 A2A3 A4) then the code fail to excute in this line: Invalid proceduer call or argument error
.AddComment "hmk :" & Chr(10) & " value was " & ActiveCell.Value
and then fail to excute in this line: typr mismatch error
Selection.Value = (Selection.Value) * r
now here, does have to be loop to solve
here is the full code
Sub test()
Dim r As Integer
ActiveCell.ClearComments
I am trying to do, is paste a word in front of text that is already residing in cell throughout an entire column, and then automate this process by creating a macro that will do the same thing for me throughout an entire column. To best explain this, it woudl be like if you have a column 100 rows/cells long, and every cell already contains data. I need to insert something in front of what lies within each cell.
View 9 Replies View RelatedCell B4 is selected by user and then runs the macro. The macro then looks UP (A3, A2, A1 etc) cell by cell until it finds the first cell that has a valid date in it and if that date is same as the date that the macro is being run pastes "This Text" into the comments section (Not replacing everything in the comments but simply adding to it.)
Column A
2/20/2009
(empty cell)
Dave
Jonathan
Steve
2/21/2009
James
Sally
Tyler
(empty cell)
John
Betty
I need a nudge in the right direction with how to amend the below code so that it :
1: cycles though all cells in a workbook, and sees whether the text reference of the cell contains a picture filename (i.e. searches for .png or .jpg in the cell contents)
3: if (1) is correct, it retrieves the picture from "C:/Users/jeff/Documents/Standards/" and pastes it as a cell comment background in the cell to the right (and overwrites any comment backgrounds that might already exist there)
The code below does something a bit different: it looks in a defined range, then adds a comment with a background picture retrieved based on the text in the cell to the left.
I'm sure this is a pretty basic change, but my VBA skills aren't up to it...I've only just started reading though Walkenbach's Power Programming! I'm using Excel 2007
Sub InsertComment()
'www.contextures.comxlcomments03.html
Dim rngList As Range
Dim c As Range
Dim cmt As Comment
Dim strPic As String
On Error Resume Next
Set rngList = Range("A1:A5")
strPic = "C:/Users/jeff/Documents/Standards/"
On Error Resume Next
For Each c In rngList
With c.Offset(0, 1)...................
I have a table with huge amount of data. I use a UserForm with textboxes to populate the information of the required row.
There's a Comment Box text on a specific cell that I need to populate on one of the textboxes but I am unable to do it.
The code I have that works well, populates the cell content:
[Code].....
Now, on that cell, there's a comment text that I need it populated as well on another textbox but it doesn't work. I tried:
[Code] .....
But this doesn't work.
Need a formula to automatically comment a cell when rows with given number consecutive columns has same entry example:
A B C D E F G H
1 0 0 0 0 5 6 7 18
2 0 0 5 6 7 0 8 26
3 0 5 0 0 0 0 0 5
row 1: there are minimum 4 '0' in consecutive columns, so H1 is sum of A1:G1 = 18 and automatically comment cell H1 "there are 4 zero" row 2: because there are no 4 '0' in consecutive columns, H2 is 26 , and no comment row 3: there are 5 '0' in consecutive columns, so H3 is 5 and automatically commented cell H3 "there are 5 zero"
i have the following code to insert comments into cells, however if the user cancels the input box (i.e. doesn't insert any text), a comment is still added with their details and the comment 'FALSE'. Is there anyway to stop comments being added if the user cancels the input?
Sub Insert_Comment()
Dim iReply As Integer
Dim cl As Range
Dim sComment As String
Dim sText As String
Dim UserNameWindows As String
attached excel file .I need the data thats there from B4:E8 to be displayed on cell I9 as a comment .is there any way to do it ?
View 6 Replies View RelatedA sheet, compose of groups of 9 items and their corresponding qty. I need to have the same serial no. be commented on each items of the same group. I am doing in this mechanical way:
1. add comment of serial no. on the first item of group,
2. copy and paste, with paste special>>comments, on the remaining items of the same group,
3. Repeat this sequences on the other groups, which means hundreds.
Other than these tedious procedures, is there any better way?
I need to create a macro to do the following:
Search the activecell for a text string (a), and then either paste in text string (b) at the end of the cell if (a) is found, or text string (c) if (a) is not found.
For example, if the activecell has "AA/" in it, I want the cell to become "AA/01" (pasting in "01" at the end), and if the cell has just "AA" in it, I want it to still become "AA/01" (pasting "/01" at the end). The macro will be linked to a commandbutton.
I have data like this
textrows to repeatelements in row
MB1216
MB233
MB3116
MB4415
MB558
i want to paste text for MB1 in column B like from MB1-1 to MB1-16 and MB1 2-1 to MB 2-16 because MB1 has 2 rows and 16 elements to repeat, for MB2 in cloumn B like MB2 1-1 to MB2 1-3 and MB2 2-1 to MB2 2-3 and MB2 3-1 to MB2 3-3 because MB has 3 rows and 3 elements to repeat like this i want to continue upto MB5
I am expecting like this
A B
MB1 MB1 1-1
.
.
.
MB1 1-16
MB1 2-1
[code]....
and i would like to continue this for the rest of text in column A .Here i tried with commond button simple and now i am in position to paste text in a given range but not the way i am expecting.
Attached File : sample (2).xlsx
Example: A1, I go to school (001). I would like to copy only (001) and past to B1. like that and process to the last row of A1. or I would prefer manual last row.
View 9 Replies View RelatedHow do I paste text from a column into a diagonal line of cells (i.e. A1, B2, C3, etc.)? Additionally (and this may be related), how do I get the cursor to move to a diagonal cell after an entry? (as opposed to down or to the side)
View 2 Replies View RelatedEssentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
I want some vbs code on my 'Copy All' button in Email Data sheet which will do my work. Its a bit lengthy but who knows the concept will find it easy.
I have one sheets -
Sheet attached - Worksheet .xlsm
Workshet.xlsm [Data in 'Mod' sheet i)should convert from text to column and paste in 'Row Data' sheet ii) then transfer form Row Data sheet to 'Email Data' sheet 'Mobile Data' sheet and 'Other Data' sheet when Copy All button is clicked in Email Data sheet.
There should be some logic which will fetch appropriate date from 'Mod' sheet to the respective sheet . We can have some kind of logic like
If 'Register' found then take the value of register and workstation and paste in Email Data sheet.
All data below should be fetched from Row Data sheet which is blank now and will get the data when we click the Copy All button ,
1st Register Count:
Below Register Count (*) i.e. 16 If workstation count present copy to E15 in Email Data sheet in Table B
Below Register Count (*) i.e. 9 If register count present copy to E16 in Email Data sheet Table B
2nd Register Count:
Below Register Count (*) i.e. 8942 If workstation count present copy to C15 in Email Data sheet in Table B
Below Register Count (*) i.e. 2883 If register count present copy to C16 in Email Data sheet in Table B
3rd Register Count:
Below Register Count (*) i.e. 0 If workstation count present copy to E18 in Email Data sheet in Table B
Below Register Count (*) i.e. 1 If register count present copy to E19 in Email Data sheet in Table B
4th Register Count:
Below Register Count (*) i.e. 98 If workstation count present copy to C18 in Email Data sheet in Table B
Below Register Count (*) i.e. 999 If register count present copy to C19 in Email Data sheet in Table B
Substr:
B32:B44 will be pasted in C29:C41 in Email Data sheet in Table C
i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
B50:B62 will be pasted in B29:B41 in Email Data sheet in Table C
i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
Is there a way to change the font size and style of a comment of a certain cell?
I mean is it possible to have the sizes of comments varies in one worksheet?
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies View RelatedI am trying to combine the text from the comments boxes of a full row of cells into the comments box of a separate other cell in order to provide an overview of the comments in these cells in one place.
View 2 Replies View Relatedwhen i use a macro to add a comment to one of my cells, if i put in too much text the box doesn't resize itself and you can only read part of the comment. how to resize the comment box to the size of the text i put in?
View 2 Replies View RelatedI need to figure out how to make certain text bold in a comment using vba. I'm making it so it adds a comment that looks like this:
View 7 Replies View RelatedI am in need of a macro that will copy the text from A1, and paste it to a comment on every cell that contains text within sheet 1.
View 4 Replies View RelatedI have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
Is it possible to change the default text size on comments I insert throughout my spreadsheets? I have to enlarge 100% of them.
View 2 Replies View RelatedIs it possible to insert text as a comment on another sheet based on a date?
I have Sheet 1, that has 3 columns, Name, Date, Reason
Sheet 2 is a monthly calendar with the dates in E5:AH5 and the names from D6:D10.
What I am trying to do, is when they enter their name, date and reason on sheet 1, I want the reason to to be inserted on sheet 2 as a comment in the cell that matches the date and the name.
I have a number of comment (all column D) that have lots of data in each one.
The data will appear like this (each new entry (new entry denoted by a date))
01-May 12:58:05 Liam
02-May 16:18:27 Josh
07-May 11:51:26 Bob
02-May 01:13:34 Terry
What i want to know is, can i change the colour of the text in the comment, if its todays date. So in this case 07-May 11:51:26 Bob goes red (its the 7th here for me).