Paste Text Value For Specified Number Of Times Down To Column
Feb 27, 2014
I have data like this
textrows to repeatelements in row
MB1216
MB233
MB3116
MB4415
MB558
i want to paste text for MB1 in column B like from MB1-1 to MB1-16 and MB1 2-1 to MB 2-16 because MB1 has 2 rows and 16 elements to repeat, for MB2 in cloumn B like MB2 1-1 to MB2 1-3 and MB2 2-1 to MB2 2-3 and MB2 3-1 to MB2 3-3 because MB has 3 rows and 3 elements to repeat like this i want to continue upto MB5
I am expecting like this
A B
MB1 MB1 1-1
.
.
.
MB1 1-16
MB1 2-1
[code]....
and i would like to continue this for the rest of text in column A .Here i tried with commond button simple and now i am in position to paste text in a given range but not the way i am expecting.
I have a few spreadsheets with a few land transactions. I want to see if the parties involved are male or female, or both (in case of joint titles). And how many. I've tried to use ISNUMBER formulas and COUNTIF formulas but I can't seem to make them work. I've attached an example of what I need to do, the original has many more column with more info, and the names are in a different language which makes it easier to identify as female or not (like 'phany' in english female names etc).
A1:A10 contains text (say colors) and B1:B10 also text (say vegetables). I need a formula to count the number of times a certain combination of numbers and vegetables appear in the same column, so if "red" and "carrot" appeared in A4 and B4 and also in A6 and B6, the result would be 2.
I need a formula that will show the total number of times "text" is entered into a column and when sorted by year that would only show the total for that year. The COUNTIF formula i'm using only works for the total, not when sorted by year.
I have a task which I am sure can be done quite simply. I have a list of names in column A and a number in column B. I want a Macro to copy the name in column c, d, e etc for the number in column b.
I enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
I have this list with articles at work. It looks like this:
1 1 1 2 2 2 3 3 3 etc
I wish to find out if any number in a column appear more then 3 times, and if it does, return that number to be. Is this possible with a formula? I've tried, but didn't succeed.
I am trying to split names across columns. The problem is that some names spilt into 3 columns (first, middle, last), and others split across 5 or 6 (extra names, etc.)
Is there a way to specify split, using SPACE as a delimiter, but only split on the first TWO spaces, then leave the rest alone?
I want to count the number of times a word appears in a range (like M9:S663), but sorting it by the month it appears (eg: january = 2, february = 56, march = 2000, etc.)
I managed to do this but there has to be a better way
Right now, I'm trying to find a way to count the number of times a certain phrase appears in a column.
I'm currently using this formula for exact values: COUNTIF(A1:A5,"Hello"), but this only works if an entry in a column is exactly: "Hello"
I want to be able to count a column even if it has more words, such as "Hello how are you" etc., and this column would be counted because it has the word "hello" in it.
How would I go about counting the number of times TA shows within strings of text in a range within a sheet. Example: TA,MH in cell A2, CB,TA in cell C40, ES,TA in cell Q19. Result would be 3. Ideally, I'd like the formula to reference a cell that has TA as the look up data such as in A1 I'd have TA.
I have a formula that I use to tally data and return the number of times a particular value is present in column C.
IF(COUNTIF($C$2:C2,C2)=1,SUMIF(C:C,C2,E:E),"")
I copy this formula down the sheet until arriving at the last input in column "C". Can someone tell me how to write this in code. All I would like visible in Column "F" is the output not the formula.
I want to count how many times a particular text appears in Column A depending on the number times another text appears in Column B.
Say for example if I have in Column A {A, B, C, D}nd column B I have {AA,BB,CC) and if I want to check how many times column A has "A" value when the column B has "CC" value, then how should I proceed with this ?
I am trying to create a graph that is conditional on two different columns. The first column is a date column, the second column has various categories. I want to show how many times each category appears per month. This database is continually added to so I wanted the formula to reflect the entire column range.
For example, let say I have 5 categories (Grapes, Apples, Peach, Pear, Banana). Column A would show a date (in a M/D/Y format) and Column B would list the fruit type. I want to show how many Grapes were input in January, February, March, etc. and then move on to show how many apples in each month, and so on.
need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
Example: A1, I go to school (001). I would like to copy only (001) and past to B1. like that and process to the last row of A1. or I would prefer manual last row.
How do I paste text from a column into a diagonal line of cells (i.e. A1, B2, C3, etc.)? Additionally (and this may be related), how do I get the cursor to move to a diagonal cell after an entry? (as opposed to down or to the side)
Essentially, I have 2 Sheets: "SheetWSS" = data to be copied "SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS" ----------A------------------------B-------------------------C 1------Trade ID -------Description---------System no. 2--------579----------------Loan ---------------------- 7 3--------580----------------Deposit---------------------22 4--------702----------------Deposit--------------------- 11 5--------703----------------Loan ----------------------- 58 6--------732 ---------------Loan------------------------66 7--------733----------------Deposit-------------------- 99 etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do: 1) Go into Column C, find system no.7 and 11. 2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied. 3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
I want some vbs code on my 'Copy All' button in Email Data sheet which will do my work. Its a bit lengthy but who knows the concept will find it easy.
I have one sheets -
Sheet attached - Worksheet .xlsm
Workshet.xlsm [Data in 'Mod' sheet i)should convert from text to column and paste in 'Row Data' sheet ii) then transfer form Row Data sheet to 'Email Data' sheet 'Mobile Data' sheet and 'Other Data' sheet when Copy All button is clicked in Email Data sheet.
There should be some logic which will fetch appropriate date from 'Mod' sheet to the respective sheet . We can have some kind of logic like
If 'Register' found then take the value of register and workstation and paste in Email Data sheet.
All data below should be fetched from Row Data sheet which is blank now and will get the data when we click the Copy All button ,
1st Register Count:
Below Register Count (*) i.e. 16 If workstation count present copy to E15 in Email Data sheet in Table B
Below Register Count (*) i.e. 9 If register count present copy to E16 in Email Data sheet Table B
2nd Register Count:
Below Register Count (*) i.e. 8942 If workstation count present copy to C15 in Email Data sheet in Table B Below Register Count (*) i.e. 2883 If register count present copy to C16 in Email Data sheet in Table B
3rd Register Count:
Below Register Count (*) i.e. 0 If workstation count present copy to E18 in Email Data sheet in Table B
Below Register Count (*) i.e. 1 If register count present copy to E19 in Email Data sheet in Table B
4th Register Count: Below Register Count (*) i.e. 98 If workstation count present copy to C18 in Email Data sheet in Table B Below Register Count (*) i.e. 999 If register count present copy to C19 in Email Data sheet in Table B
Substr: B32:B44 will be pasted in C29:C41 in Email Data sheet in Table C i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
B50:B62 will be pasted in B29:B41 in Email Data sheet in Table C i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
I am trying to come up with a macro that selects values from one sheet and inserts them into another sheet. The number of values will change each time based on the user's entry, as well as the number of times that each entry should be pasted.
For example:
Entry: X | Y | Z Number of Times to be Inserted to New Sheet 3 | 2 | 1
Result: X X X Y Y Z
I have spent a while trying to figure it out, however the best I can come up with is using an array, but I can only get one value from the array to paste multiple times:
(*Note: In my testing, I didn't insert into new sheet or set up the array to handle different values, I was just trying to get the basic idea to work)
Dim A(1, 3) As Variant A(1, 1) = Range("C3").Value A(1, 2) = Range("D3").Value A(1, 3) = Range("E3").Value
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
I am trying to do, is paste a word in front of text that is already residing in cell throughout an entire column, and then automate this process by creating a macro that will do the same thing for me throughout an entire column. To best explain this, it woudl be like if you have a column 100 rows/cells long, and every cell already contains data. I need to insert something in front of what lies within each cell.
I have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent)
On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.
