I am looking for code to do the following:
1. Copy data from Column A in Sheet1 (could be up to 1000 rows)
2. Paste the data in Sheet2 in "arrays" of 9 columns and 16 rows
So basically, the first table would contin the first 16x9 = 144 numbers that are being copied and pasted from Sheet1. The second table would include numbers 145 to 288 and so on.
I am retrieving a CSV file from the net. In this file there are 'x' amount of row data and 7 columns. I only care about the values in the 7th column for each row. I also don't care about the entire first row. A graphical version would be represented something like this, with the values I want colored in orange:
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
.
. extending until the end of the data set
.
I've managed to dice this thing into a jagged array by first splitting it using vbLf as a delimiter, and therefore adding those to an array called Lines(). Then I split Lines() up using commas as the delimiter and threw those into a jagged array, let's call it Breadcrumbs()(). I want to throw all the values from Breadcrumbs(i)(6) into an array of its own. Here's my code so far:
Code:
Public Sub CSVparser(file As String)
Dim Lines As Variant
Dim j As Integer
Lines = Split(file, vbLf)
ReDim breadCrumbs(UBound(Lines)) As Variant
For i = 1 to UBound(Lines) - 1
breadCrumbs(i) = Split(Lines(i), ",")
Next i
End Sub
Though I am familiar with the use of Array in formulas I can't seem to get my head around the way arrays are used in the VB world.
It is my understanding that you can read and write data into an array for copying/moving it around and reordering.
This is a simplified version of what I am trying to do.
I have some data in a row, say:
1, 2, 3, 4, 5, 6, 7, 8 etc.
I would like to poplute an array and then "Write" the data into a range so that it comes out something like:
2, 4, 1, 3, 8, 6, 7, 5 etc
I have tried to play around with array in Vb but could not seem to get anywhere.
Am I mistaken that is is possiable?
If someone could point me in the wite direction I would appricate it.
I have searched for this online and have found examples that I either did not understand or was unable to adapt...
I an newbie at VBA but I took some short programing classes back at my college days. I am trying to declare an array with different data types and since that seems to be imposible for what I gather then my other option is to declare what I remember as a structure.
View 9 Replies View RelatedI have formed data arrays in VBA after running a time series simulation model. The array is m simulations x n periods. Small example: ...
View 6 Replies View RelatedAny easy way to retrieve data from another table using an array formula.
I have two files that I am using that contain 2 sets of data with columns for name, address, city, and state. The red highlighted data needs be used to find the blue data first column, which is a possible name for the company found from the red data. The issue is that the blue data is larger and has rows of data that will not be found in the other table.
I have the spreadsheet attached. I attempted to use an if/and statement :
=IF(AND(D2=C8I:I,E2=J:J),H2,0)
but found out that it does not work with arrays and only found the first address by default.
How would I set up a formula to retrieve the possible names using criteria from the blue data such as if the address and city match, then input that company name?
I would like to select a item from a list and have a text box display data from the next column (corresponding row) Also, I would love if I could type something into a second textbox and have that copy onto a third column (again, corresponding row) Also, if the add comment command button could transfer that record to the "commentted items' sheet. I have attached an example.
View 2 Replies View RelatedI have code that runs through multiple arrays trying to match data to items in the arrays and it takes a long time to run.
Code:
dim a as long
dim b as long
dim c as long
dim d as long
dim e as long
dim MyAarray as variant
[Code] ..........
That's basically what the code does. however, it takes an extremely long time to get through with everything as each array increases in size.
I was trying to subtract two arrays of data and putting the result in some cells but with no success unfortunately. I'm relatively new to VBA and I'm just starting now to make calculations with arrays so excuse my little knowledge. The arrays that I'm trying to subtract are from row 1 to 250 and m and n variables have the number of the columns. Here is my routine:
View 3 Replies View RelatedI am trying to create/modify an XY scatterplot using VBA.
I declare local variables and point them to the chart and a new data series for the chart, such as:
Dim chartone As Chart
Dim chartseries As Series
Set chartone = ThisWorkbook.Charts("Chart1")
chartone.ChartType = xlXYScatterLines
Set chartseries = chartone.SeriesCollection.NewSeries()
I set the series data, using an array, such as:
chartseries.Values = Array(1, 3, 5, 7, 9, 11)
I can set the Xvalues to a set of dates by setting .Xvalues to a woksheet range that includes date-formatted data. (like this):
chartseries.XValues = Worksheets("sheet3").Range("m9:m14")
(where m9:m14) contains dates...
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
I have been trying to solve this problem by breaking it down to it's core elements and it seems to hang up at a certain spot but I can't figure out why.
formula is: {=LARGE(IF(AND(Array1+8<20,6-Array1<0),Array2,0),1)}
where: Array1 is a sequence of numbers, say, 2 5 8 11 14 17
Array2 is a corresponding sequence of numbers 1 2 3 4 5 6
the resulting array should return the numbers 0 0 3 4 0 0
and my answer should be 4
instead my answer is 0
when I break it down and select six cells and use the formula:
{=if(Array1+8<20,Array2,0)}
my result is: 1 2 3 4 0 0
and another six cells and use the formula: {=if(6-Array1<0,Array2,0)}
my result is: 0 0 3 4 5 6
when I select a single cell and use the formula: {=large(if(Array1+8<20,Array2,0),1)}
my result is: 4
when I select a single cell and use the formula: {=large(if(6-Array1<0,Array2,0),1)}
my result is: 6
I've tried this method several different ways, even using "Yes" & "No" as my result and then try to match them up. I've tried doing this not using named array and just selecting the cells themselves for the formula. All with the same results.
How do I deal with arrays in vba? Below is a dummy code just to check the array I specified is working:
View 5 Replies View RelatedI have a worksheet that has 20 columns and 500 rows. I created a VBA macro to loop through the data to hide rows that do not meet certain criteria. After the data is selected I copy and paste those selected rows to another sheet. The macro works well but I would like to use an array to contain the data that I copy and paste to a new sheet. I have been trying to find information on multi deminsion arrays but I have not been able to fully understand how to get the information into the array and then how to get it out again. Most of the examples that I have seen are for two maybe three columns (dimensions). I am hoping that someone could point me in the right direction to get started on this. I also have a few books on Exel VBA but none of them seem to address my question.
View 9 Replies View RelatedI am trying to fill calumn B with the data from an array. There are more rows than entries in my array and I want to loop back to the start of my array when it reaches the end of the array results.
Sub test()
Dim i As Integer, MyArray As Variant, RowCount As Integer, ArrayCount As Integer
MyArray = Array("test 1", "test 2", "test 3", "test 4", "test 5")
RowCount = Cells(Rows.Count, 1).End(xlUp).Row
ArrayCount = UBound(MyArray)
For i = 1 To RowCount
Range("B" & i).Value = MyArray(i - 1 Mod ArrayCount)
Next i
End Sub
I have a time card report which will record the time spent on work for each employee. Each month, i have to generate the time card report and copy the data to my master file. Is there any code that can auto copy the time card entry directly to the master file? I only need some of the entry on the time card report, some of the column can be ignored.
I was thinking of creating a macro that will prompt me to choose the file to import as there are different file for different individual. Attach here with the master list (Demo.xls) & the time card for one individual (Nov-KTTHAM.xls) for reference.
I want to copy the data on column B of the time card to the column A of the master list, column C to column B, column D to column C, column E to column D, column F to column E and column G to column G.
The formula is designed to sum a set of data based on 22 variables between a certain date range. In order to keep the formula manageable, I have grouped the variables into arrays.
EX.
Array 1. - 20 potential choices (Service codes)
Array 2. - 2 choices (pkg types)
Array 3. - 2 choices (volume type)
Array 4. - 3 choices (company names)
Each array (listed horizontally on one spreadsheet) calls a specific column of data to match from a different worksheet. I have no problem if only applying one array but multiple arrays return incorrect values.
I have two 2 Dimensional String Arrays with data. I need to find a way to get the difference between these two Arrays. I am new to VBA, I don't know how to deal with these. I certainly feel that there is some efficient function for doing this. or Is the naive two for lop concept is the only way to go?
View 2 Replies View RelatedI have two arrays that output as two columns next to each other. Like this:
ID
Responses
1
4
2
3
3
2
4
5
5
1
I would like to sort the responses column and have it show as this:
ID
Responses
4
5
1
4
2
3
3
2
5
1
I am guessing that I need to some how merge them into one array so I can sort them as one entity rather than sorting two columns separately.
Here is my sample data and the macro I use to pull the data i need for the two arrays. sample.xlsm
Can you declare a const as an array in VBA? For example, let's say I wanted to define an array of ORDINALS:
Const ORDINALS(0 to 9) = ("0th","1st","2nd","3rd","4th","5th","6th","7th","8th","9th")
I have an array that will open specific workbooks. But Now I need to append a Case Number to the beginning of the file, and I don't know how to cycle through two Arrays. I have been setting it up as:
Code:
Dim Report
Dim Reports
Dim WB AS Workbook
Dim WS AS Worksheet
Reports = Array("Case01", "Case02", "Case03", "Case04")
For Each Report in Reports
Then I open the workbooks and print them.
Next Report
Now I want to add in a 2nd Array, that will Append the 1st item in CRN to Reports, then the 2nd item in CRN to 2nd item in Reports. So it would look something like this.
Code:
Dim Report
Dim Reports
Dim CRN
Dim CRNS
Dim WB AS Workbook
Dim WS AS Worksheet
CRNS = Array("0501202201", "0134851081", "9715288103", "1697774009")
Reports = Array("Case01", "Case02", "Case03", "Case04")
For each CRN in CRNS
For Each Report in Reports
Then I open the workbooks and print them.
Next Report
Next CRN
But that cycled through each CRN before moving to the next Report?
I have two arrays of the same size and shape. Question: is there a more straight forward way to add up all the corresponding elements in both arrays without looping through each pair of numbers one at a time?
View 2 Replies View RelatedCurrently I am trying to concatenate two arrays stockotherarray and stockfittingsarray to create stockarraynew
Below is my code, I keep receiving a compile error.
Sub stockarraynew()
stockarraynew() = Split(Join(stockotherarray & Join(stockfittingsarray))
End Function
Does anyone happen to know of a list of formulas in Excel that can be used as Array formulas?
I am trying to get a better grasp of what happens with array formulas in Excel - for instance MATCH seems to be a good candidate to hold an array of values when confirmed with CSE, but INDEX seems like a formula that wouldn't itself hold an array of values (although it might be able to lookup the corresponding cells of two arrays with corresponding rows and columns).
Below is my attempt to understand working with arrays of values.
Test() works fine. Yay! But it is "too easy" just plugging in a hard value for the range address...I don't always have that luxury. Normally I work with ranges that I've determined at runtime. I'd like to assign a range of values to an array but my attempt below -- test2() -- fails. I am not even sure if my effort is a good approach or not, but I know it doesn't work!
Basically, I am looking for how to assign the range of values to an array when I am determining the range in code -- as in:
After
Set Range = ~~
or,
Range(Cells(1,1),Cells(x,y)) ~~................