I have the following which works as it should. However I want to tweak it so that instead of the Environ Username getting pasted into the sheet under the last used row in Column U, it pastes the environ username in the first blank row it finds in Col U starting from row 1 and looking down.
[Code] .....
Here is what is supposed to happen: when the macro button is hit, today's date will appear in the first blank cell in row 3, then the text "late" in the next cell, then finally "1" in the next cell.
I have been trying to use .end(xlright) but i can not quite get it to work.
I am facing a problem in pasting.
Col A Col B
aa
bb
cc
dd
e
ef
fg
h
g
h
my data is having blank cells. when I am trying to paste it in other column it is getting pasted as it is. I don't want to copy the blank cells. It should be like Col B.
VBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
I have a macro which opens a csv file, moves a few columns about then pastes the data into a master workbook. The problem I have is that even though there is only around 1,500 rows of data on the csv file, the sheet on the master workbook is showing up to row 1,048,576 after the data has been pasted in! This is causing issues as I use this data later on in the macro and there are a couple of 'find and replace' commands that take an age to run because of the number of blank rows.
Code:
Workbooks.Open Filename:= _
"L:PVDDBB15." & Format$(Sheet1.Range("G5"), "ddmmyy") & ".csv"
Columns("AB:AB").Select
[Code].....
I have several sheets with one master sheet. I have a trigger on each sheets that manipulates the data on that particular sheet. Here is the code I'm using:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
Dim cell As Range
Set r = Intersect(Target, Range("A:A"))
[Code] .....
Now the point where i put new code is where i want the information from that particular row, column a thru column m to be special pasted linked to the first blank row from the top down to be pasted starting over from Column B. so A1 would be pasted on B1. I ran the recorder and got this as the code ActiveSheet.
Paste Link:=True so i do i incorporate what i want.
For simplicity sake if I wanted to paste the letter A in to a cell that already had the letter B in it to make the cell read AB how could I achieve this?
View 10 Replies View RelatedI can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedThe below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?
View 2 Replies View RelatedThe formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
I have a macro that is checking to see if a column meets my criteria. If it does I have it set up to copy the entire row and paste it to the next sheet. How can I write the code to tell it to paste to the next available row on that sheet?
View 9 Replies View RelatedLet's say there's a couple row:
[Code].....
Here's a column I will be pasting:
[Code] ....
If I want to "Insert Copied Cells" in place of Yellow on Row1 and shift the cells down, the rows would look like this:
[Code] .....
How can I make it so the rows would be the following during such a paste:
[Code] .....
This is because I have hundreds of cells that I need to insert as columns all the while pushing complete rows down. If you're trying to understand why, it will be for some online marketing purpose as demonstrated here in this sheet: [URL] ...
I have the following code which copies and pastes from one row to another
View 3 Replies View RelatedI'm trying to paste something into the row after the last row with data in Column A. What is wrong with my code?
View 2 Replies View RelatedOn a sheet of my workbook, I need to allow typing but not pasting. I'm using Workbook, because I'd just as soon not allow pasting anywhere.
If the data is copied from within Excel, this seems to work:
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Application.CutCopyMode = False
End Sub
but if the data is copied from somewhere outside of Excel, it pastes it anyway.
I've got cells which change after I use Solver to do simulations, These cells after the calculation is run I'd lke to paste into a seperate sheet and row for example (in preparating of charting them for example)..
I would like to paste it as folllows for example... .. but problem is, let's say the below list are in column A of the new sheet, than column B would be the first output of the calculation in the other sheet, column C would be the second output from the calculation in the other sheet. and so on..
I don't know the first thing on scripting, but I'd like to click on button where the calculations are made which when clicked on ,will paste to the other sheet in this sort of manner below.
Each calculation will use another column.. so the script must recognise there is other columns to the left already filled, ie. B, C, D, E F, coresponding to the results of calculations already performed.
Gross income
Expenses
Net Tax
I have 2 excel sheets with Donor ID numbers on both sheets. What I need to do is match them up I need 3 rows
Original # Assigned # Invoiced #
the original number and the invoiced number will be the same number, but I need to copy the invoiced number to the other sheet that has the original and assigned #'s on it and match it up.
I am trying to use the code below to select certain information from different areas of each sheet in the workbook and paste it onto the List sheet one after the other so I end up with a long list made up of short lists off each sheet. The macro runs through each sheet OK. each sheet has the correct area I want to copy highlighted, so I know it's selecting the right area for copying, but the 'List' sheet is blank, i.e. nothing has been copied to it.
This macro is one I'm trying to put together from other macros I already have, and they all work
Sub Generate_Repair_Kit_List()
For Each ws In Sheets
ws.Activate
Const testColumn = "A" ' change for your data
Dim lastRow As Long
Dim topCell As Range
Set topCell = Range(testColumn & 1) ' top of column
lastRow = Range(testColumn & Rows.Count).End(xlUp).Row
'work up from the bottom until we hit
'a cell that has a border on the bottom edge.
Do While lastRow > 1
lastRow = lastRow - 1.........
I am tryig to paste a formula using VB code, but it does not accept at all.
below mentioned is the formula i want to paste in A2 cell
=IF(Sheet1!N2"",Sheet1!N2,"")
I think this may have come up previously, but..
I want to either retain validation in a cell when I paste data into it - or
I want to apply a validation to a cell which already has data in it.
The validation only seems to work when you apply the rule to an empty cell then manually enter data into it. I ideally want to be able to paste multiple columns into validated columns to check for format compliance.
I need to paste Entire row in one sheet( Sheet1) to the previous row in other sheet(Sheet2) ex: If i copy 3rd row from one sheet(sheet1) than it must be copied to 2nd row in other sheet(sheet2)
Sub try()
Sheets("Sheet1").Select
Range("b2").EntireRow.Copy
Sheets("Sheet2").Select
Range("b2").EntireRow.Previous.Select
ActiveSheet.Paste
End Sub
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies View Relatedin one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View Related