Pasting Formula In Vb
Mar 31, 2009I am tryig to paste a formula using VB code, but it does not accept at all.
below mentioned is the formula i want to paste in A2 cell
=IF(Sheet1!N2"",Sheet1!N2,"")
I am tryig to paste a formula using VB code, but it does not accept at all.
below mentioned is the formula i want to paste in A2 cell
=IF(Sheet1!N2"",Sheet1!N2,"")
I've got the basic formula I need to paste down a column. Is there a way to get the Row_Index_Number to change for me w/o having to manually correct it for each row? Copy and Paste does not change the Row_Index_Number. Maybe theres another formula or a trick that I can use?
View 3 Replies View RelatedIm looking to add an update macro button so if A ""
the formula contained in say H2 gets dropped down until it hits were col "A" is blank.
I often end up in a scenario where I want to be able to move text from one column into another using a formula, which involves pasting a formula down a filtered range... E.g. Column A contains both ID numbers & dates, I want to move ID numbers into Column B, so I apply a filter to all ID numbers using a formula "=A1" and paste it down the filtered range.
It becomes an issue when there is greater than 50 - 60 thousand rows - excel throws an error "selection range is too complex" and disregards the filtered range.
Only thing I can think of would be a VBA script to automate pasting a formula in blocks of 50,000 rows.
I am creating a data tracking workbook. Information is entered into cells on
different sheets, then the tallies are pulled to one easier to read sheet.
In creating the tally sheet, I am setting the cell formulas. The cells
referred to are constant, only the sheet referred to changes. For example,
the cell might read
='FP 1'!$I$25
and the next one should read
='FP 2'!$I$25
....and so on. I would like to be able to paste the formula and have the
referred to sheet change so that I do not have to go through and make
hundreds of little changes.
I'm trying to copy and paste this formula to multiple cells and am having difficulty doing so without everything in the formula changing.. SUMIF(Bankroll!Q14:Q6000,U143,Bankroll!Y14:Y6000)
I only want the U143 to change to U144, U145, etc. Yet when I copy and paste down the sheet it changes the Q14:Q6000 and the Y14:Y6000 values as well. I've been having to go through and paste the formula one line at a time and then manually change the U143 to the current U cell that I want it to represent in order to keep the rest of the values the same. Is there a faster way than this?
On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
=SUMPRODUCT((INDIRECT("'"&B2&"'!$B$3:$B$200")=$A$2)*(INDIRECT("'"&B2&"'!$C$3:$C$200")="Yes")*(INDIRE CT("'"&B2&"'!$E$3:$E$200")))
This gives me the intended result. B2 in this case is January. C2 is February and so forth.
For simplicity sake if I wanted to paste the letter A in to a cell that already had the letter B in it to make the cell read AB how could I achieve this?
View 10 Replies View RelatedI have a macro that is checking to see if a column meets my criteria. If it does I have it set up to copy the entire row and paste it to the next sheet. How can I write the code to tell it to paste to the next available row on that sheet?
View 9 Replies View RelatedLet's say there's a couple row:
[Code].....
Here's a column I will be pasting:
[Code] ....
If I want to "Insert Copied Cells" in place of Yellow on Row1 and shift the cells down, the rows would look like this:
[Code] .....
How can I make it so the rows would be the following during such a paste:
[Code] .....
This is because I have hundreds of cells that I need to insert as columns all the while pushing complete rows down. If you're trying to understand why, it will be for some online marketing purpose as demonstrated here in this sheet: [URL] ...
I have the following which works as it should. However I want to tweak it so that instead of the Environ Username getting pasted into the sheet under the last used row in Column U, it pastes the environ username in the first blank row it finds in Col U starting from row 1 and looking down.
[Code] .....
I have the following code which copies and pastes from one row to another
View 3 Replies View RelatedI'm trying to paste something into the row after the last row with data in Column A. What is wrong with my code?
View 2 Replies View RelatedOn a sheet of my workbook, I need to allow typing but not pasting. I'm using Workbook, because I'd just as soon not allow pasting anywhere.
If the data is copied from within Excel, this seems to work:
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Application.CutCopyMode = False
End Sub
but if the data is copied from somewhere outside of Excel, it pastes it anyway.
I've got cells which change after I use Solver to do simulations, These cells after the calculation is run I'd lke to paste into a seperate sheet and row for example (in preparating of charting them for example)..
I would like to paste it as folllows for example... .. but problem is, let's say the below list are in column A of the new sheet, than column B would be the first output of the calculation in the other sheet, column C would be the second output from the calculation in the other sheet. and so on..
I don't know the first thing on scripting, but I'd like to click on button where the calculations are made which when clicked on ,will paste to the other sheet in this sort of manner below.
Each calculation will use another column.. so the script must recognise there is other columns to the left already filled, ie. B, C, D, E F, coresponding to the results of calculations already performed.
Gross income
Expenses
Net Tax
I have 2 excel sheets with Donor ID numbers on both sheets. What I need to do is match them up I need 3 rows
Original # Assigned # Invoiced #
the original number and the invoiced number will be the same number, but I need to copy the invoiced number to the other sheet that has the original and assigned #'s on it and match it up.
I am trying to use the code below to select certain information from different areas of each sheet in the workbook and paste it onto the List sheet one after the other so I end up with a long list made up of short lists off each sheet. The macro runs through each sheet OK. each sheet has the correct area I want to copy highlighted, so I know it's selecting the right area for copying, but the 'List' sheet is blank, i.e. nothing has been copied to it.
This macro is one I'm trying to put together from other macros I already have, and they all work
Sub Generate_Repair_Kit_List()
For Each ws In Sheets
ws.Activate
Const testColumn = "A" ' change for your data
Dim lastRow As Long
Dim topCell As Range
Set topCell = Range(testColumn & 1) ' top of column
lastRow = Range(testColumn & Rows.Count).End(xlUp).Row
'work up from the bottom until we hit
'a cell that has a border on the bottom edge.
Do While lastRow > 1
lastRow = lastRow - 1.........
I think this may have come up previously, but..
I want to either retain validation in a cell when I paste data into it - or
I want to apply a validation to a cell which already has data in it.
The validation only seems to work when you apply the rule to an empty cell then manually enter data into it. I ideally want to be able to paste multiple columns into validated columns to check for format compliance.
I need to paste Entire row in one sheet( Sheet1) to the previous row in other sheet(Sheet2) ex: If i copy 3rd row from one sheet(sheet1) than it must be copied to 2nd row in other sheet(sheet2)
Sub try()
Sheets("Sheet1").Select
Range("b2").EntireRow.Copy
Sheets("Sheet2").Select
Range("b2").EntireRow.Previous.Select
ActiveSheet.Paste
End Sub
What I'm trying to do is to select multiple groups of cells (say 5x4) which are below each other, but then paste them next to each other
For example, copy cells A1:E4, A8:E11, A15:E18 and paste them to A20:E23, A23:E26, A27:E26
I have cells that include phone numbers emails and names and I just want to copy and paste the phone number, how do I do that ;?
View 3 Replies View RelatedI have two files: let's say File1 and File2.File1 has one column: datas are in a text format.I copy this column. I want to paste it in my second file.File2 is closed.I open it and i paste my column.
Here's my problem. If i let my first file opened, there's no problem(!!): my column is pasted as i want. My datas keep their original format.
But, if i close my first file and after, i open File2 and i paste my column, then my datas lose their original format.My column takes a numeric format.I can see it because my datas are on the left in the column.And i can chek it by a sum: if i do 400+200, for example, the result is 600. In the first case(text format), the result is 0.I don't understand why.If someone can explain me this situation, i'd be happy.I repeat: my second file is closed. I open it after my copy in the first file.
I regularly copy into notepad then copy that into excel because I don't want to carry over the text formatting. Is there a better way to do this? To set up the cells so that they don't try to carry the formatting over?
View 4 Replies View RelatedI have a graph, that I would like to be able to copy from one sheet and paste into another, is there away of doing this without dropping the data i.e. every time I copy and paste the graph clears, I don't want to copy the spreadsheet data as well as the graph is purely for a visual
View 3 Replies View RelatedI Want to copy some part of an excel sheet and paste it exactly as an image on to another excel sheet.
View 3 Replies View RelatedI am using excell 2007 and am having a few problems with conditional formatting.
I am trying to do the following.
i have 6 cells in 6 columns ( c2, d2, e2, f2, g2, h2 ) each with figures 17.14+
Now i am trying to add a formula so when ever i insert a number in the cell below e.g c3 i want the cell c3 to turn green or red depending on the value in the above cell (c2).
so in all:
c2 has the value 17.14
if i insert the value 17.14 or less in cell c3 i want the c3 cell to turn green.
if i insert the value 17.15 or more i want the cell to turn red.
now i know how to do this in the conditional formatting feature but i want to do this will all the cells refering the the cell above.
i also do not want to create 6 diffrent conditional rules.
Is there a formula i can use that can be pasted into each cell and the cell number edited?
I am trying to copy information specifically addresses into an excel spreadsheet to turn into labels in a mail merge. My first column is a name and then the next column is the address. I need the address to be in one box, in three or however many lines, instead of three different rows because when I go to merge it into word, it comes out has several different labels and not all the information on one.
View 3 Replies View RelatedI'm trying to paste the number 1-987654321 into cell A1. But when I click the cell onces then Ctrl+V to paste, it converts the number. It puts 1 into cell A1 and 987654321 into cell A2. I've tried changing the format of the cell to TEXT and GENERAL but that doesn't work. Now I can double click the cell and then paste and that works. My only issue with that is all the other data I'm pasting into the spreadsheet, I'm able to do so by only clicking once. This spreadsheet will be used by 20 people and I'm afraid that if they paste by click once in all the other cells and have to double click to paste in this cell, that it will cause confusion and a headache for me.
View 4 Replies View RelatedI'm working with the sort of data that spills over into multiple cells if you try to paste it without first putting the cursor in the function window. Is there any way to change this default behaviour (or, alternately, automatically redirect the cursor to the function window every time I hit "enter" and go to the next cell)? I'm working with literally thousands of entries, so the time spent double-clicking and/or manually redirecting the cursor to the function window adds up after a while.
View 1 Replies View RelatedI have a sheet with data in columns A to F, sorted by column B
Column B contains a list of names which may occur once or up to one hundred times.
What i would like to do is look at column B and for each name select columns A to F and copy those cells to another workbook which is then saved and closed.
However I would only like a maximum of 20 rows at a time to be copied.
As an example
Bob occurs 16 times so those 16 rows are copied
Fred occurs 26 times so only the first 20 Fred's are copied and then the next 6 are done.
Wally occurs 54 times so the first 20 are done then the next 20 and then the remaining 14