Macro Adds Blank Rows When Pasting Data In From Another Sheet?
Mar 11, 2014
I have a macro which opens a csv file, moves a few columns about then pastes the data into a master workbook. The problem I have is that even though there is only around 1,500 rows of data on the csv file, the sheet on the master workbook is showing up to row 1,048,576 after the data has been pasted in! This is causing issues as I use this data later on in the macro and there are a couple of 'find and replace' commands that take an age to run because of the number of blank rows.
Code:
Workbooks.Open Filename:= _
"L:PVDDBB15." & Format$(Sheet1.Range("G5"), "ddmmyy") & ".csv"
Columns("AB:AB").Select
[Code].....
View 7 Replies
ADVERTISEMENT
Jun 19, 2012
I have several sheets with one master sheet. I have a trigger on each sheets that manipulates the data on that particular sheet. Here is the code I'm using:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
Dim cell As Range
Set r = Intersect(Target, Range("A:A"))
[Code] .....
Now the point where i put new code is where i want the information from that particular row, column a thru column m to be special pasted linked to the first blank row from the top down to be pasted starting over from Column B. so A1 would be pasted on B1. I ran the recorder and got this as the code ActiveSheet.
Paste Link:=True so i do i incorporate what i want.
View 2 Replies
View Related
Mar 12, 2014
What this code keeps adding the data to the active sheet instead of the specified "Users" sheet:
[Code]......
View 2 Replies
View Related
Mar 19, 2013
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
View 5 Replies
View Related
Jul 30, 2013
I'm pasting a lot of data into a spreadsheet and then using a macro to split the data into three different sheets/tabs. I'm doing this by simply copying entire columns. Each sheet/tab has a headings row and autofilters added so that my boss can filter on certain manufacturers in one of the columns.
The problem is that when he selects a manufacturer, at the bottom left corner of the screen it shows the number of records, which at the moment will be something like "6 of 65211".
The actual sheet only has a few hundred rows (not 65211). So how do I delete all the blank rows beneath my data using a macro or vba code?
As an extra point, I'd like to use column B to check for blank rows (not column A).
View 6 Replies
View Related
Oct 8, 2009
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
View 9 Replies
View Related
Jun 28, 2006
I have multiple worksheets and I am looking to take specific information from those worksheets and paste them into a new one, thereby compiling the information.
The "C" column is populated with certain cells that say "Not Acceptable". This varies from sheet to sheet, but all in the C column. I'm looking for a code that will run through all the sheets, find the cells that say "Not Acceptable", copy that row of information it is in, and paste it onto a specific sheet that we'll call "Summary"
View 4 Replies
View Related
Feb 1, 2009
I am using 'Dim' to define a string for SheetName, a variable.
I have tried with no success various ways to try and paste data to a sheet with this variable.
I know the variable is correct as I am using it to make a new sheet then rename it and also move it.
View 9 Replies
View Related
Mar 31, 2014
I have a sheet made into a form with some check boxes included. If I select all the relevant columns, create a new sheet, and paste into cell A1 - all of the information carries over just fine. You can still select cells and check the boxes in the new sheet.
However, when I record this action as a macro, using the macro produces a picture of the selected columns instead of actually copy/pasting the information. I can't click on the cells or check boxes. I can only move the picture around within the new sheet.
View 7 Replies
View Related
Jul 11, 2014
i was wonder is there was any way I could go to the following website:
[URL]
and copy paste it into an excel sheet. What i would need is to get this page and the previous 7 days by changing the date "20140711" to "20140710" and so on. Each orevious day needs to be copy pasted to a different sheet.
As a new day occurs, I would like to delete the page 7 days ago and add the new day on a new sheet.
View 9 Replies
View Related
Jan 10, 2014
I am trying to create a macro that will take inputs entered into a range of cells in 1 worksheet and then paste it into another range on another sheet. The target range is selected based on a condition and once the values have been pasted then the target range should be locked.
I have been trying the following code but keep getting the Run-time error 1004 telling me that the PasteSpecial method of range class has failed. Can some one explain what I may be doing incorrectly?
Code:
Dim i As String
i = Range("Month").Value
Select Case i
Case "January"
Sheets("INPUT SHEET").Select
Range("Input_In").Select
Selection.Copy
[Code] .........
View 1 Replies
View Related
Aug 8, 2007
In column A I have the age of a sale i have completed (compared against todays date) and from B - N of the same row i have the data that coresponds to the sale. As Column A changes daily by 1 i would like to only keep the rows whereby column A is between 1 - 10. For any that are above 10 I would like to cut and paste to a second sheet, strangely entitled "older than 10 days" !
as there are formulas after column N which calculates the data i would only like to cut columns B - N of the specific row.
I think I need to create a macro that first sorts column A so I have the oldest data at the top and then a loop to check if these are above 10, i then want to cut from B - N and paste into another sheet.
View 9 Replies
View Related
May 31, 2006
breeze.
Here is my situation:
X Y Z
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
A
B
C
The above format is how I want my spreadsheet to look like. On another sheet within the workbook, I have a chart with some control options that allow me to vary X, Y, Z (I can vary either of these individually). Anytime I vary any one of X,Y,or Z, then the values in A,B,and C all change. This is what I am looking for, a Macro that will allow me the opportunity to everytime I change or vary an option (X,Y,Z), I can hit "Save Scenario" and the new values will be appended to my "Report" sheet. The values of A-C and X and Y are kept on a sheet entitled "FY 07". X is maintained on a sheet called "Inputs". So in all, X,Y, Z and A,B,C are all copied for each scenario.
View 9 Replies
View Related
Jan 31, 2014
I have a table into which I paste values to ColumnA. The other columns have formulas. The number of values to be pasted varies. When the number being pasted this time is less than the number pasted last time, empty rows remain above the valid data after sorting, which is undesirable. I want to get rid of those rows just before (or after?) pasting the new values. The way I see it is I want to delete all but the first data row of the table so the formulas remain untouched in the first row. Then, as new values are pasted the formulas replicate automatically.
Sample file is attached : Sample.xlsm
View 14 Replies
View Related
Jan 6, 2010
=COUNTIF(F3:F38,"=VL") This works for totaling the VL in the cells in the column but what if I need it to add DVL in the same column to that total? So I need it to add both VL AND DVL as one total. I can make it add one or the other but not both
VL DVL
VL VL
VL
VL
VL
5 2
View 2 Replies
View Related
Jan 17, 2014
I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))
View 14 Replies
View Related
Feb 11, 2010
I have inherited a monstrous speadsheet on which all data appears on a single sheet rather than being broken up across several sheets in some logical fashion.
One portion of this monster is a set of quite a few form letters, each of which reference various cells elsewhere in the spreadsheet.
I want to move all of these letters, together, to another tabbed sheet as a first step in reorganizing the monster.
Simply copying and pasting the cells or columns doesn't work. It fails in different ways depending on which pasting options I employ.
A very simplified version of my problem appears on the 5 sheets of the attached file, with what I hope is just enough further detail about the difficulty.
By the way, I also tried using the "Insert Copied Cells" option when pasting but since this failed with the exact same results as one of the other options I didn't include the results in the example shreadsheet.
View 5 Replies
View Related
May 1, 2009
I have code that selects and copies data from one sheet onto another sheet. the sheet that is getting data copied too has borders defined. When i run the code i get a debug error. Here is the issue.... when i remove all the borders it works fine. I have tried everything i can think of to solve the problem but have had no luck. anybody have an idea what is causing this. i attached the workbook file so you can see what is going on.
View 2 Replies
View Related
May 25, 2009
I have written a macro that copies a row to a new sheet and adds a formula to that copied row.
View 8 Replies
View Related
Apr 17, 2014
I'm generating a runtime 1004 error with the macro I have attached to CommandButton1, "Clock_In".
The macro is copying the name, date and time from 3 cells on Sheet1 and pasting special values to another sheet.
View 2 Replies
View Related
Apr 23, 2014
I have two worksheets.
Worksheet 1 is a large data sheet containing columns of data (Date, State, Payment Method, etc, etc)
Worksheet 2 is the 'Report' worksheet with 2 blank cells (A1 and A2) for users to manually enter the Start and End dates, a drop-list for State names (B1) and a drop-list for Payment Method (C1) - Cash or Credit Card.
How can I write a macro to:
1) Filter by Start and End Dates then,
2) Filter by State name then,
3) Filter by Cash or Credit Card then,
4) Copy these filtered records (i.e. whole row/s) onto the 'Report' worksheet starting at Column A, Row 5.
5) Macro to end with a 'Successful' message.
View 1 Replies
View Related
Apr 14, 2009
I am looking to save a range of data from an input sheet, to a data sheet.
I know how to save indivdual cells to a worksheet in the form of a data
what i am looking to do is save A6 - J6 down A19 - J19, but only saving the data which is entered
A6 - J6
A7 - J7
View 6 Replies
View Related
Jul 17, 2014
I'm trying to implement a very simple macro to paste a set of cells - already copied to the clipboard from a CSV file - into a worksheet.
Basically, all I need it to do is to allow the user to open that other CSV file, hit CTRL+A and CTRL+C, then go to the relevant sheet in my workbook and run the macro, which should simply paste the copied data into that sheet (starting at cell A30).
Here's what I have so far - I keep getting an error when the macro reaches the ActiveSheet.Paste command.
VB:
Sub UpdateData()
'
' UpdateData Macro
'
Dim strSheetName As String
[Code]....
View 5 Replies
View Related
Aug 11, 2014
Macro (see below).
I have two sheets 1) ap modified 2) gl download
It's merging the two sheets together. however, it's pasting over the last row of data. For example, gl download has data from row 4 to row 100. The Macro is pasting data from ap modified starting in row 100 of gl download instead of row 101. How can i correct this?
Sub C_Merge()
Dim w1 As Worksheet, w2 As Worksheet
Set w1 = Sheets("ap modified")
Set w2 = Sheets("gl download")
Dim lr1 As Long, lr2 As Long
[Code] .........
View 3 Replies
View Related
Oct 10, 2008
I have a macro launched from a command button that sometimes puts a bar at the left side of the window. When it executes the line Sheets("graph").Select the first line in the macro it puts the bar at the right side of the window. The characteristics of the bar are:
1) It is associated with the main excel window - if you minimize the window containing the worsheet the bar is still visible
2) It is one of two widths, about 1/4" or about 2.5"
3) If you move an Excel toolbar to the left side of the screen the bar disappears. If you move the toolbar back to the top of the page it doesn't return but it can appear the next time you run the macro.
4) It only appears some times you run the macro - I can go days without seeing this problem and then it happens every time I run the macro.
View 9 Replies
View Related
Dec 23, 2008
I have a multiple rows of data, but one column which is K has data like:
1020
1020
1020
1020
1020
1030
1030
1030
1030
1050
1050
1050
What i want my macro to do, is whenever that number in column K changes to copy all the data in row A thru K to a new sheet.
View 9 Replies
View Related
Feb 26, 2009
I'm trying to do is record a macro that will copy data from cells A1/A2 of Test.xls and paste it to cell A1/A2 of Text2.xls. Then when I run the macro again, it will copy B1/B2 of Test.xls to B1/B2 of Test2.xls, and then do that for the remaining cells.
View 9 Replies
View Related
Feb 9, 2013
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
View 1 Replies
View Related
Feb 15, 2014
I have been using this macro to separate lots of rows with a certain amount of blank rows.
Example:
Code:
Sub test()
Dim j As Long, r As Range
j = InputBox("type the number of rows to be insered")
Set r = Range("A2")
[Code] .......
I trying to change it so that, instead of inserting how ever many blank rows, it just copys the row above.
Example (Row A to C)
I have been messing around with macro recorder and i could select each row and paste it into the blank rows, but from researching on the internet selecting and pasting data seems to be a waste of resources (ram?) and i will be running this on a couple hundred rows (lots of data). Also, i would like to keep the functionality so that i can still choose how many times it copys/inserts each individual row from a input box.
I eventually want the data to end up like it is shown in the table but i am takin it one step at time because i want to understand what the code is doing.
View 1 Replies
View Related
Dec 28, 2011
I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
View 5 Replies
View Related
