Path Of File Picked Up From Cells In Spreadsheet
Oct 17, 2008Is there a way to make the contents of a particular cell in a worksheet show where to pick up another file. Here is my code to pick up a file:
View 9 Replies
ADVERTISEMENT
Save File As Text Using Cells For Path & File Name
Dec 20, 2009How to save a file, with file- name. but the directory is to be read in worksheet "towns" in Cell1 (brussels) and filename in worksheet "names" in cell B2 (i.e. winter), so it saves to c:russelswinter.txt as a wordpad or kladblok txt file, that keeps a number, so each time we push a button "go back from worksheet names to worksheet towns" the "number" that is saved in the txt document goes up by value +1. In Flemisch, the "old" code goes as follows, and saves the number in the txt file Factuurnummer7.txt. But I want that the file name (here: FactuurNummer7) can be a variable text issue, which has to be read - as already noticed - in cell B2 (with the word WINTER). So the are 2 worksheets: towns, ans names
pad$ = Application.DefaultFilePath
'controle = Dir(pad$ + "FactuurNummer7.txt")
'If controle = "" Then GoTo EerstAanmaken
'Open pad$ + "Factuurnummer7.txt" For Input As #10
'Input #10, Nummer1
'Close #10......................
File Path From Cells In Workbook
Jul 23, 2014here I have a few good and perfect codes, the issue is my systems changed so I need it to look in some different places for data.
basically I need to create a file path that includes the data from a cell. this cell is found be searching a table full of data.
see the code below
Code:
Sub saveandprint()
Dim MyPath As String
MyPath = MyPathstart & "Invoice" & "" & Format(Date, "dd-mm-yy")
MyPath1 = "Z:Invoices Temp GKL " & Range("B16").Value & Format(Now, "hhmm")
[Code]....
Save Hyperlink Path For File With Absolute Path And Non-Relative?
Mar 4, 2013is it possible to configure Excel in order to save the Hyperlink path for a file with absolute path and non relative?
I notice that the hyperlink is ....pdf ry.pdf
if I change the position of the file excel there is a problem!
I would like to save es. d:invoichepdf ry.pdf
Trim Full File Name & Path To File Path Only
Sep 27, 2006I have a variable ("DestFile") that defines a path to a file (used in saving the file)...
I'm in the process of getting a Sub to hyperlink to this file, but in some circumstances, I may only want to hyperlink to the folder, not the actual file...
How would I go about trimming the "DestFile" address to get a "DestFldr" address?...
An example of "DestFile" might be;
S:BryanFor KenGulf ConstructionST0609014-t.xls
(the file name length may vary)
What code can I use to consistently trim it back to;
S:BryanFor KenGulf Construction
as the "DestFldr" variable?
Macro To Separate File Name And Path From Complete Path
Oct 3, 2012I want to run a macro to separate File Name and Path from the given complete path
For Example
Code:
In Column A : Given Complete Path " C:MainFolderRecordsSubFilesFile1Record.pdf
I need it separeted like
Code:
In Column B :File Name = Record.pdf
In Column C :File Path = C:MainFolderRecordsSubFilesFile1
Is there any way to do this through a macro
Save File Using Cells For Path & Name Macro Code
Mar 19, 2008I want to create a macro that saves my file this way:
in a folder named after B2
and
as a file named after B4n.
Cell Value Of Closed Workbook With Concatenated File Path In Cells
Sep 24, 2007I have a report that is collated from several other workbooks. The source workbooks follow the same naming convention throughout the year and so I have managed to concatenate the file path to bring through the text of the filepath and cell reference however cannot work out how to get the value of the cell. For example, I have the file path in A1, file name in B1 and sheet and cell referernce in C1.
I am using {=(A1&B1&C1)} which gives me R:CONFIDENTIALREPORT FOLDER[REPORT 24.09.07.xls]Sheet1!$D$1. To make matters slightly more difficult, the source reports would be closed. Is there an easy way or am I going to have to do this in VBA.
Automatically Open File In Specific File Path When Another Sheet Is Opened
Mar 20, 2014I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
Import CSV File Using Cell As File Name & Active Workbook Path
Nov 3, 2009I am trying to import some csv files so I can combine them, but am having probs with the filename and location.
Sub test()
Dim wsName As String
wsName = ActiveCell
Sheets("Data").Select
With ActiveSheet.UsedRange
LastRow = .SpecialCells(11).Row
End With
With ActiveSheet.QueryTables.Add(Connection:="TEXT; &thisWorkbook.Path &" " & wsName &", Destination:= Range("A" & LastRow))
.Name = wsName
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.RefreshStyle = xlInsertDeleteCells.....................
User Input For File & Path For File Copy
Jan 26, 2008Below is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?
Sub Macro1()
Dim fs As Object
Dim oldPath As String, newPath As String
oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located
newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save
Set fs = CreateObject("Scripting.FileSystemObject")
fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls"
Set fs = Nothing
End Sub
Getting File-path From Selected Input File
Jan 29, 2014getting full file path from selected input file?
I have a macro with text box and browse button.
User can click on browse button and it will allow them to select only text files.
Now for further processing I need to get the file path and file name in 2 different variables.
Like if user selected C:/Temp/Test.txt
Variable 1 should have C:/Temp
Varialble 2 should have Test.txt
Copy File Name And Contents Of That File In A Specified Path?
Feb 5, 2014I just found a code to copy file path and file contents. However it is copying folder path and folder contents.here is my requirement.I will specify a path, macro has to copy that file name in a particular cell, then it has to copy all its contents.
ex:
file name 1 has 3 sub files in it, file name 2 has 2 sub files in it--
column AColumn B
file name1file contents
file name1file contents
file name1file contents
file name2file contents
file name2file contents
And also i have extend this macro to write a index function. i will tell u about this. but first i need above thing I researched but I didn't find.
I need file name in a column then i need file contents in b column.
if a file has 10 file contents in a file then that file name should come 10 times in a column, and in b column all its contents.
Retrieve Cell Data From Another Excel File And Paste Into Specified Cells In Current Spreadsheet
Dec 8, 2012I have a spreadsheet witht the following design:
Column A = Date
Column B = Value 1
Column C = Value 2
I have a folder with excel files named by date (e.g. 081212 = 8th December 12). Within each of those files is Value 1 and Value 2. They are always in the same cell (B6= Value 1, B16= Value 2).
How can i create a macro/script where the Values in Column B and Column C in my spreadsheet are automatically updated where there is a Date in Column A but no values in Column B or C?
In other words, i need the script to read the date in Column A and if Column B and Column C are blank, then it needs to find the corresponding date excel file and copy Value 1 and Value 2 into the cells in my spreadsheet.
Copy Of Active Workbook Path Stamped Onto Spreadsheet With Date And Time / Edit Check
Feb 1, 20101) I need to add an edit check
2) have a copy of Active Workbook Path stamped onto spreadsheet with date and time to create a visual record of where the file has been saved (described after the code below).
1) I need to verify that two cells (S7 and S9) are not blank before running my code below (=IF(OR(S7<>"",S9<>""),RUN CODE,"You must select your Provider or Division before you can save this document")).
- If both of these cells are blank a message box should notify the user that they must select the provider and/or division before they can continue with the save.
- If one or more of these cells are not blank the code below should run.
Split File Name From File Path
Feb 16, 2008Each month I am sent a spreadsheet which contains a list of 100's of different file paths (including file name).
For example (Quater 1 is the document name)
R:ManagementJohn2008SalesSectionAQuater1
I would like to remove the file name from the file path (I will then convert the file paths to hyperlinks which will open the folder the document is stored in but not the document itself.
For example
R:ManagementJohn2008SalesSectionA
Separate File Name From File Path
Jun 12, 2008I am trying to separate a filename from a filepath in Excel VBA 2003.
I am using the Application. GetOpenFilename command to get the user to select the correct file.
However, this also seems to record the filepath.
I am trying to separate the filename out of this so that each file( name) activates a different sub procedure.
I am storing the result of the getopenfilename as a Variant.
At the moment I am having to specify the full path in order to get each sub to run. This is fine for 1 user - but not for others as the files are stored in different locations for each user.
Get A File Path Using Vba
Jun 3, 2004I'm using this code to import a file, but I want to be able to save just the path (with no file name) to a variable to use for the output file. This code saves the path and file.
FileName = Application. GetOpenFilename _
FileFilter:=Filt, FilterIndex:=FilterIndex, Title:=Title)
Any help would be greatly appreciated. I didn't know but what there was a function that I could apply to the 'FileName' variable that would remove the file name...don't know.
Use The Path Of My File
Mar 23, 2005how can I refere to the path whaere my addin is located without having to write it
i tried with this, but....................
Sub AddingAddIn()
Dim p
p = Application.Path
AddIns.Add Filename:=("path")
AddIns("HTML").Installed = True
End Sub
Get Rid Of Path In File Name
Apr 26, 2007How can I get the name of a workbook WITHOUT the path when I have the name WITH the path?
To be more specific. When I use "Application. GetOpenFilename" the result is a file name for say "my_book" including the path. With this I can open the file using "Workbooks.Open" and Excel will show me "my_book". But when I want to reference this workbook later on in say "Workbooks(my_book)", then I need the file name without the path. How can I get that one in VBA?
Till now I was using "CurDir" to find out the path after opening the file and just subtracted it from the full file name. This seamed to be fine. But now I had a situation where CurDir gave me a path with abbreviations (~),
Macro To Save Workbook By Referencing Cell In Another Workbook For File Name And File Path
Mar 21, 2013I have got a master workbook and I have written macro to copy and paste data on another workbook. write a macro to save the new workbook to a file path with a file name where both file name and path are stored in master workbook sheet...
View 5 Replies View RelatedVariable For File Name Or Path Name?
Jun 25, 2014How could i get the below code to work with a variable as the file name?
Or could I use something like "thisfile" to determine where to import to.
[Code] .....
Relative File Path VBA?
Feb 28, 2014I have a WinForm, which I'm calling via VBA's Shell command:
Code:
Sub Button1_Click()
Shell "C:TemplateFuncitons.exe " + ActiveWorkbook.FullName, 1
End Sub
I made this module an Excel Add-in and added it as a button in the quick access toolbar. Now, the idea is for the WinForm.exe and the Excel.xla to always be in the same directory (go hand in hand). I want to make a relative path for the .exe which will be the path to the folder where the .xla is + the string "TemplateFunctions.exe" in the end.
Extract File Name From Path
Jan 10, 2008I am having trouble with a macro of mine. Essentially it opens a file, based on user input (Full path is stored in variable FilePath), but then I want to select that workbook, and therefore need just the .xls filename. I figured I would create a new variable, FileName, to pull out the filename.
How can I edit the string in my macro to extract just the filename.xls from the full path?
Return File Path
Dec 2, 2008I have a UserForm with a button that, when clicked, opens up a File Directory Browser that the user can select the file of their choice.
The code is below :
Private Sub DirectoryBrowser_Click()
Dim fn
fn = Application.GetOpenFilename 'can add parameters. See help for details.
If fn = False Then
MsgBox "Nothing Chosen"
Else
MsgBox "You chose " & fn
'now that you have the name, you can open it or do something else
End If
Workbooks.Open fn
End Sub
What I would like is the filepath (of the file they choose) to appear as the displayed caption on another button or label.
File/Path Error
Nov 19, 2009We have built quite a large Excel based program that contains quite a lot of coding. the program seems to work fine the majority of the time but every so often we recieve an error message that causes excel to not save, or to crash and shut down.
The message that comes up is "File/Path Error"
Now I've just done some hunting around online and some links I have found speak of declairing the document location correctly in the coding. I was wondering could this be the issue at hand?
Anytime the document needs to save, there is a cell with the directory path and file path declared as a variable (Actually as Dim String) within the coding. Is this the best way to declare a file path?
Also, the problem seems intermittent. We Compile the VBA coding before saving, we also use a Clean Project add-in within Excel. These processes usually help but every so often the problem comes back.
Run A .bat File From A Macro (using A Relative Path)
Dec 3, 2008How can I run a DOS .bat (batch) file from within a Macro? This is what I came up with so far and it seems to work. The only thing is that I need this to have relative paths, running from the same directory the Excel Workbook is in.
View 2 Replies View RelatedCreating File Path Automatically
May 27, 2009I am looking to have these workbooks save automatically to a folder on the C: drive.
If the folder I specify is not available on the C: drive, how do I write teh save comand to create it automatically with a prompt
Find File Path To USB Drive
Jun 12, 2009I have a file which is kept on the C Drive. Each day, a different excel file is downloaded to a usb memory stick. The first file reads data from this file. The problem is, the drive letter keeps changing from E to F and the macro then crashes out.
The file on the memory stick always has the same name, so is there a macro to find the drive letter of this file and then use it in my existing macro?
How To Make File Path Independent
Dec 29, 2011How can I make the files path independent. Lets say I have 6 workbooks, one of them having macro that connects all the six books. While working on my pc, I entered the file locations by myself. The macro runs fine.
Now I have to send the files to someone and would not like them to add their download directory at most places in the code. I want that after downloading, they have to only open the main file and press the button to run macro. How should I do that.
Right now am using this approach:-
sub main{
str 1file;
set 1file = Workbooks.Open ("c:/downloads...../1stfile.xls")
and similar code for calling other files.