Pausing Before Macro
Jul 7, 2009
1) open at a specific time each day,
2) grabs some information from Bloomberg (updating takes about 15-20 seconds after opening the workbook)
3) and then run a macro after the updating is finished.
Right now I've:
1) created a batch file to open the file
2) set Windows Scheduled Tasks to run that batch file at 4:15pm
3) Created a workbook open event that calls my macro if the workbook is opened between 4:14pm and 4:17pm
What I'm looking for is the best way to pause before running my macro until the workbook has been open for say 30 seconds. I have read through a lot of threads asking this question, but the threads have not been marked solved, and it seems that a lot of the proposed solutions have the problem of pausing all activity in the sheet, so the information from Bloomberg doesn't update while the macro is paused.
View 5 Replies
ADVERTISEMENT
Oct 7, 2008
I have made 2 macros that run one after the other to perform a certan task. My issue is that I want to run Variants that I have defined in Macro1 In Macro2 but I dont know how to reference them macro 2, or if there in the same module do they recognize the varients anyway??.
I'll list the variants defined below; could someone provide me with the proper code to reference the variants form macro1 in macro2. I am also wondering if it would be easier to combine both macros under one macro and simply put a pause in the macro between both section and have a certain command to resume once the user decides to( so it would have to be a user command such as a button). If you think this would be easier could you please provide the code to pause the macro until A button is hit. both these methods woud be useful to me elsewhere as well so if it's not to much to ask could you provide both methods.
View 2 Replies
View Related
Apr 30, 2014
Trying to create a macro where it will begin by inserting today's date into a cell, then pause for roughly 35 seconds while the massive correlation matrix pulls all the correlations of the portfolio in, then takes an output value that is generated in the workbook from the filled correlation matrix (correlation coefficient) and copy's and pastes it in a different cell. Then it repeats this process again using "Today's date - 1" (yesterday's date), waiting 35 seconds again and taking the new output value and copy and pasting it below the previous one.
I know I am not close but here is what I have for code thus far (which does not work properly).
[Code].....
View 4 Replies
View Related
Nov 3, 2009
I have written a For loop that uses a shell command to call a batch file that replaces text in some text file, Mytrail.txt. I then use that altered text file and use it to run a 3D modeling program Pro/Engineer by calling it through another shell command. I would like to add pause instructions to my routine after the shell commands. Below is a snippet of the code I am working with:
For i = 1 To N Step 1
Shell ("Reblacer.bat Mytrail.txt string_A string_B)
'Here I would like to add code that will pause the routine until the batch file 'operation is complete.
Shell "C:Program FilesproeWildfire 3.0inproe.exe Mytrail.txt", vbNormalFocus
'Here I would like to add another pause instruction until the above shell 'command is complete. Note that this shell command creates a new file in 'some directory whose name is actually string_A.prt. Could this be used to 'tell visual basic that it may recontinue executing the routine.
Next i
End Sub
How to add pauses to the routine above that prompt visual basic to continue executing the code only after the shell commands have completed their tasks?
View 2 Replies
View Related
Oct 16, 2009
I am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
View 10 Replies
View Related
Jul 10, 2012
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
View 4 Replies
View Related
Jul 21, 2007
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
View 2 Replies
View Related
Jan 15, 2014
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
View 9 Replies
View Related
Aug 13, 2014
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
View 2 Replies
View Related
Jan 26, 2009
I have a macro that I found somewhere on the net to look within a folder and list all the files of a certain file extension.
The macro to do this is in the attached example and is called 'Get_File_Names_Within_Dir_ext'.
I have created a basic userform outline, 'UF1' for the user to define:
Select File Extension
Select Folder to Search
Destination Sheet
I just don't have any idea how to sync the two.
If you type 'exe' into 'TB1_File_Extension' of 'UF1' the macro should search for '*.exe' files within the specified folder.
The search folder 'RefEdit1' box should open a windows explorer box (or some such) so that the user can select the directory in which to search for the previously specified file extension.
'TB2_Destination_Sheet' is a text box for the user to type the sheet within the workbook in which to list the files found within the specified directory.
'CB1_Find_Files' should activate the macro to find any files for the specified criteria.
There is also a Button 'Find File Types' in Sheet1 of the file which should activate the userform 'UF1'.
View 14 Replies
View Related
Feb 1, 2009
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
View 5 Replies
View Related
Sep 17, 2009
I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.
Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.
Is there a way to do this?
I've attached the file for you to see.
View 13 Replies
View Related
Oct 3, 2012
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open()
Sheets("Houselist").Activate
Selection.QueryTable.Refresh BackgroundQuery:=False
Sheets("Front").Select
Range("A1").Select
End Sub
View 2 Replies
View Related
Mar 4, 2014
I am looking for a macro that i can store in my personal.xlsb. what i need is pretty much is something like this
private sub workbook_open
if workbook.name "inventorysummary.csv"
then application.run "personal.xlsb!capacity"
end sub
I only need it to run just for this file and i cannot place it in the file due to it gets replaced every day. Which if it didn't get replaced. I know how to do auto opens when the file stays the same I am just unsure for this.
View 1 Replies
View Related
Nov 6, 2011
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
View 3 Replies
View Related
Mar 16, 2007
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
View 2 Replies
View Related
Jul 16, 2007
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies
View Related
Dec 15, 2008
I've recorded a macro that copies an entire tab into a new spreadsheet then goes on the copy and paste information from one tab to another.
When I run the macro from the Tools>Macros menu it works perfectly.
But when I copy the code and add it to that of a button it fails and posts the following error: Run-time error '1001': Select method of Range class failed.
The first attachement shows the code for the macro as it is alone, and the second shows how I simply copied and pasted it into the 'view code' window of the button.
Needless to say I'm a beginner at macros and only every record them, I can usually make stuff work that way but this has me stumped!
View 12 Replies
View Related
Jan 11, 2010
Put in a statement within a Macro that populates cells with the values that I want it to but instead of populating all at the same time, is it possible for the values to be delayed.
I have designed a mock spreadsheet (attached) it has two columns 'Before' and 'After'
After = Before values (in this mock)
When you press the button, the values are populated straight into the 'After column' can we add the delay between the values? So that the values dont come up straight away.
View 3 Replies
View Related
Jan 27, 2010
Macro to export and import a module and assigning different macro automatically ...
View 9 Replies
View Related
Oct 9, 2012
I have recorded the following marco and it works fine. I would like to modify it so the user would highlight a range of cells rather than have the fixed area :
"'ConsExecProp@20120920'!R4C5:R113C21"
What code lines would need to be added?
Application.Goto Reference:="R4C5"
ActiveWorkbook.PivotCaches.Create(SourceType:=xlConsolidation, SourceData:= _
Array("'ConsExecProp@20120920'!R4C5:R113C21"), Version:=xlPivotTableVersion12 _
[code]....
View 4 Replies
View Related
Apr 17, 2014
I have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
View 2 Replies
View Related
Jul 3, 2007
Here in our department we made a pretty elaborate macro that takes a report and sorts them out to 17 different sheets in a one workbook. This Macro pulls a file from a specific location on our server and then opens the CSV sorts it out color codes all the important information and saves it back onto the server under you specific initials.
They are four PC's along with our Managers laptop that run this Macro daily.
About 3 weeks ago my Managers laptop stops running the Macro completely and hangs in the middle of the whole thing. Eventually crashing Excel.
We try to remove the modules and re-import them back into the personal macro workbork but this does not work. The Macro's did not change and still fully function on the other four desktops to this day.
I uninstall Office on my Managers laptop and reinstall. Import the Modules again and still hangs up in very same spot it did 3 weeks ago.
I've tried to lower the macro security to the lowest level also and I've still had no luck with this laptop. I don't understand. The Macro's function perfectly on other PC's but will not function on this laptop.
View 9 Replies
View Related
Jan 7, 2009
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
View 9 Replies
View Related
Oct 3, 2006
I have a question concerning Macros and the Disable/Enable prompt. My boss has a spreadsheet which has been used for years and he recently wanted to and did remove the macros from the spreadsheet (they were no longer necessary), but the disable/enable prompt still appears when the spreadsheet is opened. I replicated this in a test spreadsheet with a simple insert line macro and received the same results. Is there a way to remove the macros and the disable/enable prompt once they are removed? I know about setting the security to low to not see the prompt, but I would think that once the macros are deleted, the prompt should not appear any more.
View 2 Replies
View Related
Feb 18, 2007
I recently installed Excel 2007, and have shared others' joy in searching for things on the ribbon. I tried to record a macro to insert an autoshape. Excel creates the macro, but drawing the autoshape is not recorded. I'm sure I'm missing something obvious ...
View 7 Replies
View Related
May 14, 2014
Basically, what I'm dealing with is an inventory system. When a cell value reaches below a certain quantity, we have a cell light up with the word "YES" (under the "re-order" column). What I'd like to do is have a macro that checks to see if that cell is populated with "YES" and if it is, to run another macro (which I already have written) that sends out an email notifying us of the need to re-order.
How it would work: The person pulling out the inventory would fill out this form and click "Submit"
submitbutton.jpg
I would then have a "call" code tied to the "Submit" button that when clicked, would run the macro to check cell population and send out the email. The email code is already written and works flawlessly on it's own. I just cant seem to figure out how to write a macro that checks for cell value and then runs it (or not) based on that.
View 14 Replies
View Related
Aug 10, 2014
Refer to attached file.
I have below code which successfully create a macro button and assign the macro correctly.
This is only doing for one sheet and i need to modify the code so that it does for all sheets of the workbook.
[Code] ....
Test Macro_Botton.xlsm
View 3 Replies
View Related
Dec 2, 2008
I have a macro that is taking a long time, so long that I think something is wrong but I dont really have a great way to check. I want to put up a little window showing the progress either by saying "i'm on row XX" or having a progress bar.
Looks like msgbox requires action before the code continues so it is not a good thing to use if you want to get progress. My formula looks for bad values in a data file and fixed them. It takes forever. I would like to have a box there that simply tells me what row it is working on.
Clearly I dont want to hit the OK button for it to continue processing. I want it to update the message box on its own and then take away the message box when it is finished processing.
View 8 Replies
View Related
Dec 15, 2009
I have a long complicated macro that processes a ton of data and gives the output in a new sheet. I then want to create new buttons (or some sort of user clickable triggers) on this new sheet that runs another macro.
I have got the actual adding of buttons in the sheet working, but I can't find a way to automatically assign macros to newly generated buttons during runtime. Is this even possible (or are there any clever tricks I could use to get around this?)
View 3 Replies
View Related