Permutations Of Some Values In A Column With Some Other Values?
Aug 16, 2014
I have a data set in 3 columns. Column A contains categories, like "Colour," "Size," etc. Column B contains several values for each of these categories, like "Red," "Blue," "Small" etc. and column C has numerical codes for each category, so 1 for each Colour, 2 for each Size, etc.
Can I create all permutations of each value in Column B, except for values that are both in the same category? For example, "red large", "red small", "large red","small red" and so on, BUT NOT "blue red" and "large small?" Ideally all these new permutations would be created in Column D.
I'd also like to create the corresponding permutations from Column C (the number codes) and put these permutations in Column E.
There will not be a fixed number of categories in Column A, or a fixed number of values in any category.
View 2 Replies
ADVERTISEMENT
Oct 5, 2006
I have a number 23753.2570, to be precise.
in another column, i have 400 rows filled with different numbers, from 1.4 to 23000,7840.
I need to find out all the possible combinations of which numbers from that 400 can make up 23753.2570.
so if my number was 40,000, and i had 4 cells with 10,000 in them, the outcome will be:
"There are 4 possible combination to your value"
then paste it into a new worksheet with the results
[cell1] = 10000 + [cell2] = 10000 + [cell3] = 10000 + [cell4] = 10000
Total = 40000
i found this code, but i tested it on the example above and it said "All Combinations exhausted" which they wasn't?
Sub findsums()
'This *REQUIRES* VBAProject references to
'Microsoft Scripting Runtime
'Microsoft VBScript Regular Expressions 1.0 or higher
Const TOL As Double = 0.000001 'modify as needed
Dim c As Variant
View 9 Replies
View Related
Aug 22, 2013
[URL]
I have Column C and D filled with numeric temperature and humidity data. I need next 16 rows (8 more set) to be filled with randomly generated dummy data by the values exist in C and D. Same numbers but randomly distributed.
View 2 Replies
View Related
Oct 1, 2013
There should be a formula to extract the largest values and its corresponding values. For example, if column
Products Costs
A1 Pen 200
A2 Pencil 125
A3 Radio 670
A4 Apple 1500
A5 Xbox 222
A6 TV 100
The desired outcome
Products Cost
Apple 1500
Radio 670
Xbox 222
Pen 200
Pencil 125
TV 100
The second goal is extracting the top 3 largest values using a formula.
Sample file is attached for your convenience. Desired outcome is in GREEN.
View 6 Replies
View Related
Dec 5, 2013
Below the two columns represent Column A (date and time) and Column B is temperature.
How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?
5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4
View 2 Replies
View Related
Dec 24, 2013
I have two columns in excel, col A and col B.What I would want to achieve is following:
Col A Col B
A 2
A 2
A 2
B 3
B 3
B 3
B 3
C 3
C 3
C 3
Now I want a total of values in column B pertaining to unique (or say 1st occurences) of values in Col A. So in this case the output should be 8 ,Achieved as follows(2 +3+3).
[URL]
View 5 Replies
View Related
Jun 11, 2014
Here is a table
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail
9266321m34:13.0E__uMail
92677165m23:43.0E__uMail
9309415m07:24.0E__uMail
[Code] .....
Here is some context
Each one of these rows represents an entry into a ticket in our incident management system. Col4 represents the method by which the incident was reported to us (Email, Voicemail, Walk In, Ask IT). A ticket can be open and closed with a single entry if the issue is easily solved or it can have many entries if the issue is complex and requires more troubleshooting or escalation to a higher tier of support. I need to determine the number of unique tickets submitted by each reporting avenue (Email, Voicemail, Walk In, Ask IT).
In this table the number of tickets that were:
submitted via Email is 14
submitted via Voicemail is 1
submitted via Walk In is 2
submitted via Ask IT is 1
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail = 1
9266321m34:13.0E__uMail = 2
92677165m23:43.0E__uMail = 3
9309415m07:24.0E__uMail = 4
[Code] ....
What I need is a formula that will produce this result.
View 5 Replies
View Related
Jun 3, 2009
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
View 13 Replies
View Related
Mar 14, 2014
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
View 2 Replies
View Related
May 15, 2014
I would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
View 5 Replies
View Related
Jan 31, 2012
Here's an example of what I need..
I want to
A B
2.5 corn
4 corn
7 green
2 green
I'd like a macro to find all corns, add up the column A for each corn and place the sum beside the last corn in column C
Then do the same with green, etc.
View 2 Replies
View Related
Apr 25, 2006
I want to sum the values in cells E2:P110 based on the values column D. The
values in D are formulas resulting in something that appears to match D112 in
some cases. I'm using the following equation:
=SUMIF(D2:D110,D112,E2:P110)
My problem is that D2 :D10 have a formula in it and it's not matching. If
I enter the result of the formula, all is good. How should I deal with this?
View 11 Replies
View Related
May 18, 2007
If I have two columns like so with Processor speed in the left and number of processors on the right:
SPEED NO OF CPU
7282
7282
7282
7281
7282
7301
7301
7302
7301
7301
7301
7301
7312
7312
7311
7311
SPEED ranging from 75 to 2000 or so Mhz, as many or as little multiples of each speed. I wish to go through this list using a seperate list of distinct values, and count the total number of CPUs for that SPEED. So, for the extract above I could manually tell you that there are a total of 8 processors running at 730Mhz
It would be nice to have a list of distinct vaues with a total count of CPUs to the right of each SPEED
730 8
731 17
756 9
834 2 etc
View 3 Replies
View Related
Feb 21, 2013
I am trying to sum certain values in one column based on the values of another column. I made a few tables, generated some random numbers, and then I started writing up an if-then statement to see if I could get what I am trying to do to work. However, I was having difficulty getting the program to run, because I was declaring more than one variable (I think).
So for instance, I want cells in column G to sum forces in column C when a joint in column E matches a joint in column A. Similarly, I am trying to do the same thing for columns F and B.
I have attached a picture, which shows what I would like for the program to do automatically (rather than me doing it all manually)! I didn't include the code I wrote, because it was so minimal
Attachment 51660
View 3 Replies
View Related
Jul 23, 2014
Ccheck the attached sheet for the explanation.
Book1.xlsx
View 2 Replies
View Related
Apr 7, 2014
I'm currently working on a spreadsheet that contains 30,000 leads and their respective companies and i need to filter out any leads that work for companies present in a different list of companies (1,834 companies). Basically, i need to filter column A so that it only contains companies present in column B. Is there a way to do this using the advanced filter?
View 1 Replies
View Related
Nov 26, 2009
I have about 360 records in Column 1 and less columns in Column 2 (333 in this case). All the values in Column 2 are in Column 1. I need to be able to match those two columns up while keeping the data in Column 3 intact with it's corresponding value in Column 2. FYI I searched and found this thread: ttp://www.excelforum.com/excel-work...n-another.html
But my problem is that I have to tie in the values with column 3 to their corresponding values in column 2. In order to illustrate, I have attached an excel file in which I did the operation manually. (note: all values in column 2 are indeed in column 1 but not in the example as I have shown for the sake of convenience).
View 2 Replies
View Related
Jul 8, 2013
I have two DB extracts for 2012 and 2013 with customer id's that no not repeat across the year - columns A and B. I need to arrange this from:
2012
2013
270806
330011
330011
350529
350529
369916
to:
2012
2013
270806
0
330011
330011
350529
350529
0
369916
So the major idea is that the customers that are extinct in 2013 would appear as 0 in the Column B; customers that are the same would be aligned vs the previous year and new id's would appear on the separate row.
View 5 Replies
View Related
Mar 6, 2014
I have a workbook with 20 sheets in English Language, but I must to translate in Russian. Translating has done by human translator, so translation is good. I must change phrases and words in english to russian. I can use find/replace function but doing by hand it's very tie consuming. I need VBA or macro who takes values in column A, finds it in entire worksheet and changes it to matching value in column B. Is it possible and how I can do it?
View 1 Replies
View Related
Nov 18, 2009
I have a vba form with three comboboxes. The first combobox contains a list of employees, the 2nd a list of work activities and the third a list containing hours. As each employee enters the data for their name, activity and hours these values are saved to sheet6 starting at A10, B10 and C10. I want to be able to sum the hours for each employee who enters data. So the completed user form could look like the following:
HTML Employee (A) Activity (B) Hours (C)
Joe Swept 1.25
Raked 1
Bill Mowed 2
Cleaned 1
Joe Trimmed 1
So as you can see there could be a blank cell in column
"A" under Joe and Bill and Joe could come back later and
enter more info. What I want on sheet6 say starting at A30 the value
Joe would be entered and in B30 his total hours 3.25. In A31
Bill would be entered and in B31 his total hours 3 and so on for other
employees
View 9 Replies
View Related
Jan 2, 2010
If values in column B are alike or if only one value exist in column B, I would like to copy values from column A over into columns D and all other columns to the right of D,
Before and after examples are below....
View 9 Replies
View Related
Aug 9, 2014
I'm using the following formula to pull values from one worksheet to another two page worksheet. It populates the two pages okay but just before that in addition to clearing out the cells I want cleared out, it also clears out my header values at the top of the second page. I need it to not clear this header data located in rows 77 to 104 (28 rows).
VB:
Sub PullOptions_Ext()
Dim rngC As Range
Dim rngQ As Range
[Code].....
View 2 Replies
View Related
May 3, 2008
I would like to determine the values of cells in column B by the values in column A. I can do that for one cell but not for two or more.
Here is what works:
View 11 Replies
View Related
Feb 28, 2012
I have 100,000 lines of data and an trying to highlight values in column B based on those in column A.
For example if 1 appears in A then several times in B then it should highlight each instance in B where it appears in B. However is 2 appears twice in B - but not in A - then it should not highlight any cel.
Column A is the criteria list I think there are 140 unique values.
Column B is the data I need highlighted there are around 100,000 rows. In there values from column A appear multiple times. I need all of the multiples in B - where they match a value from column A - highlighted.
View 5 Replies
View Related
Aug 14, 2006
I have 2 columns of data. The following code compares the values in 2 cells from each column. If the value in column A cell 1 is higher than that in column B cell 1 then the function returns the value of column A cell 1. If the value of column B cell 1 is higher then the value of column A cell 1 then the function adds the following cells in column A until the cummalative value of the values in column A is higher than the value in column B cell 1.
Function sumofA(valueA, valueB)
AddValueAcounter = 1
ValueBcounter = 1
sumA = 0
sumofA = 0
cummalativeValueA = 0
finalValueA = 0
If valueA(AddValueAcounter) > valueB Then
sumA = ValueA(AddValueAcounter)
AddValueAcounter = AddValueAcounter + 1
Else...........................
The above example compare column A, cell 1 and column B, cell 1 and then add column A, cells 2, 3 and 4 to give the cummalative value of 16. As this is higher than 15 (cell 1, column B) the function ends. I need it to contine until the end of column A. So, in this example I need the function to begin again with column A, cell 5 and column B cell 2 and so on. I need the cummalative values of A for each time the function is run to be added together, along with the values in the A cells should the value be higher than that in cell B to produce one overall value.
View 2 Replies
View Related
Jun 26, 2009
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies
View Related
Aug 23, 2009
I need to figure out how I can get excel to write me a list of permutations / combinations for the Group (column a) and Item (column b) columns in the example. The group designates the items that should be inlcuded in the combination / permutation in Related Items (column c). I have thousands of lines to do this with so I need to figure a way to automate it. I have started the Related Items column which is the results I need output. If it could format it like this adding in the space between the rows as it outputs the answer that would be perfect. Anyone know how to do this? I've found many answers, but none that have 2 columns with separate grouping within the column.
View 4 Replies
View Related
Feb 11, 2009
What I am trying to do is give the rank in column D based on the values in columns B and C. Some of the values in column B will have then same rank, and as such I want to add further criteria on which to rank them. I would first like to rank the values in column B and then rank the values in column C, which should give the rank in column D. For example Dog and Frog have the same value of 400 from the Non UK column. Therefore, rather than having these as both rank 1, I want them to be ranks 1 and 2, so want to add another criteria (UK). As Dog is greater than Frog in the UK (i.e. 10>7), I would like to rank Dog as 1 and Frog as 2. Goat will be ranked as 3 because it had the thrid highest value in the Non UK.
ABCD
1Non UKUKRank
2Cat20055
3Dog400101
4Eel200114
5Frog40072
6Goat30023
View 4 Replies
View Related
Mar 31, 2014
I have one column of data. there are currently ~10k rows, but this will increase over time. each row has either a single value (example: pepsi) or a comma separated value (google,samsung) with up to 6 commas. instead of the rows looking like this:
pepsi
google,samsung
coca-cola
I want them to look like this in one column (preferably via a formula):
pepsi
google
samsung
coca-cola
I would like the above output to be a unique, alphabetized list.
View 8 Replies
View Related
Sep 9, 2013
The Room ID values in Column A are associated with the Room values in Column B. I'm trying to move the values in Column A Room ID to Column G Room ID by having excel look up value in Column C Room or Area #, compare it to Room, associate that with Room ID and automatically fill in Column G Room ID. There are 1000s of these so it's not possible to do it by hand.
I attached a picture where i had 2 different workbooks. In reality, I'm working off of 2 worksheets within a workbook.Excel Question.jpg
View 7 Replies
View Related
