Find / Replace From Column A Values To Column B Values VBA
Mar 6, 2014
I have a workbook with 20 sheets in English Language, but I must to translate in Russian. Translating has done by human translator, so translation is good. I must change phrases and words in english to russian. I can use find/replace function but doing by hand it's very tie consuming. I need VBA or macro who takes values in column A, finds it in entire worksheet and changes it to matching value in column B. Is it possible and how I can do it?
View 1 Replies
ADVERTISEMENT
Jul 23, 2014
Ccheck the attached sheet for the explanation.
Book1.xlsx
View 2 Replies
View Related
Aug 23, 2013
One of the columns on my worksheet has a list of employees. I need to replace all the names with a blank (or delete) except for those employees on my team (7 employees). VBA code to Replace/Delete all EXCEPT (a,b,c,d,e,f).......?
View 2 Replies
View Related
Jan 31, 2014
I have data in which there are important keywords within a row (e.g.,# Message: FacesSc0_1) that are 'boundary markers' for data that is relevant to me. What I want to do is to select the data in the column between two such keywords, replace them all with the same specific value, and delete the other rows.
For example a column may look like this:
534.88
534.78
# Message: FacesSc0_1
534.78
534.55
534.59
# Message: FacesSc0_2
534.55
534.55
# Message: FacesSc0_3
534.78
534.55
534.59
# Message: FacesSc0_4
I would like to replace the values in the cells between "# Message: FacesSc0_1" and "# Message: FacesSc0_1" with the value 1, delete the values between "# Message: FacesSc0_2" and "# Message: FacesSc0_3", and replace the values in the cells between "# Message: FacesSc0_3" and "# Message: FacesSc0_4" with value 2. The resulting column would be reduced to this:
# Message: FacesSc0_1
1
1
1
# Message: FacesSc0_2
# Message: FacesSc0_3
2
2
2
# Message: FacesSc0_4
View 4 Replies
View Related
Oct 5, 2013
I am looking for a formula that will find the lowest 5 number group in column A with a total value from column B under $100 in the below table.
1 $28.75
2 $28.00
3 $27.75
4 $24.75
5 $25.50
6 $25.25
7 $25.25
8 $16.50
9 $24.75
10 $26.50
11 $24.50
12 $27.00
13 $26.50
14 $23.50
15 $23.00
16 $19.25
17 $20.75
18 $25.00
19 $20.50
20 $20.50
21 $17.75
22 $22.50
23 $20.50
24 $19.75
25 $20.00
26 $10.75
27 $11.25
28 $5.25
29 $13.00
30 $9.00
View 3 Replies
View Related
Sep 18, 2012
I have following code (see below) which finds the duplicates within columns, but I require copying and replacing duplicate values within different row cells, as I am currently finding this task hard to implement.
Input Data example:
Name
Short_code
Lng_code
[Code]....
View 9 Replies
View Related
Feb 5, 2009
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
View 6 Replies
View Related
Jan 31, 2013
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
View 2 Replies
View Related
Mar 11, 2014
I've got two question on how to 'find' some values in a specific data file, namely:
- the '52-Week High' of the share price (highest value of the share in that specific year)
- the value of the share price of the last trading day of that specific year (this isn't always 12/31/20..)
Simplified, my data looks as follows:
-In column 'A' I've a created a line of unique edentifiers (company CUSIP + year -> combined column D and E), in my set this column consists of 405 companies over 6 years of daily data -> aprox 460000 rows
-In column 'B' the date is shown -> its daily trading data
-In column 'C' the daily share price is shown
-In column 'D' the company's CUSIP (edentifier for specific company)
-In column 'E' the year
Sheet 1:
1.JPG
My final data set has to look something like this:
-In column 'A' the unique edentifiers (company CUSIP + year)
-In column 'B' the specific year
-In column 'C' the '52-Week High' of the share price (highest value of the share in that specific year) -> red numbers from sheet 1
-In column 'D' the value of the share price of the last trading day of that specific year (this isn't always 12/31/20..) -> green numbers from sheet 1
-> off course all the empty cells in column C and D normally contain the missing values
Sheet 2:
2.JPG
The big question is how do I manage to identify the red and green colored values (and link them to 'sheet 2')?
Regarding to the '52-Week High' (red colored in the sheets) I've already tried with the following functions:
- VLOOKUP: When I use this one I only get the most upper value, for example in the case of '8668102001' this would become '12'
- Combined INDEX/MATCH: The same problem as with VLOOKUP
- IF-function:In this case I get the max value of the entire 'C'-column, in the example of sheet 1: this would be '115'
Regarding the value of the share price of the last trading day of a specific year, I couldn't manage to come up with one.
View 5 Replies
View Related
Aug 3, 2007
I'm trying to do is scan down Column A (1:100 would be more than enough) and looking for 3 values, "INCOMING:", "OUTGOING:" and "WEBALERT". These will always be under Column A but the lines of text between them are different everytime. I'd like to capture the Row values of each of these values and store it in a variable which I will use in a range later. I think the way is to use a loop, but for the life of me I can't figure out how to get it to scan.
View 7 Replies
View Related
Aug 22, 2013
[URL]
I have Column C and D filled with numeric temperature and humidity data. I need next 16 rows (8 more set) to be filled with randomly generated dummy data by the values exist in C and D. Same numbers but randomly distributed.
View 2 Replies
View Related
Oct 1, 2013
There should be a formula to extract the largest values and its corresponding values. For example, if column
Products Costs
A1 Pen 200
A2 Pencil 125
A3 Radio 670
A4 Apple 1500
A5 Xbox 222
A6 TV 100
The desired outcome
Products Cost
Apple 1500
Radio 670
Xbox 222
Pen 200
Pencil 125
TV 100
The second goal is extracting the top 3 largest values using a formula.
Sample file is attached for your convenience. Desired outcome is in GREEN.
View 6 Replies
View Related
Dec 5, 2013
Below the two columns represent Column A (date and time) and Column B is temperature.
How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?
5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4
View 2 Replies
View Related
Dec 24, 2013
I have two columns in excel, col A and col B.What I would want to achieve is following:
Col A Col B
A 2
A 2
A 2
B 3
B 3
B 3
B 3
C 3
C 3
C 3
Now I want a total of values in column B pertaining to unique (or say 1st occurences) of values in Col A. So in this case the output should be 8 ,Achieved as follows(2 +3+3).
[URL]
View 5 Replies
View Related
Jun 11, 2014
Here is a table
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail
9266321m34:13.0E__uMail
92677165m23:43.0E__uMail
9309415m07:24.0E__uMail
[Code] .....
Here is some context
Each one of these rows represents an entry into a ticket in our incident management system. Col4 represents the method by which the incident was reported to us (Email, Voicemail, Walk In, Ask IT). A ticket can be open and closed with a single entry if the issue is easily solved or it can have many entries if the issue is complex and requires more troubleshooting or escalation to a higher tier of support. I need to determine the number of unique tickets submitted by each reporting avenue (Email, Voicemail, Walk In, Ask IT).
In this table the number of tickets that were:
submitted via Email is 14
submitted via Voicemail is 1
submitted via Walk In is 2
submitted via Ask IT is 1
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail = 1
9266321m34:13.0E__uMail = 2
92677165m23:43.0E__uMail = 3
9309415m07:24.0E__uMail = 4
[Code] ....
What I need is a formula that will produce this result.
View 5 Replies
View Related
Aug 18, 2008
whats the most effiecient way to find all values under column B2 and all values in column O2 and paste them in column U2?
View 9 Replies
View Related
Jan 22, 2009
In an excel sheet i have around 10 columns.
I filtered the data based on the column1 using vba. Then after that, the filtered data in column2 have repeat finance accounts. What i need to find the unique finance accounts under the column2.
Is there any methods to find the unique value under the column2?
View 9 Replies
View Related
Jun 4, 2013
I have some xls files. I need to find the sum of a specific column. the column heading is always TOTAL but the column it resides in changes column to column. so one file may have the text total in column H and others will have the text total in column X. how can i make a macro so it finds the text 'total' and then sums up all the values in that column underneath it and displays it at the very bottom of that column?
View 9 Replies
View Related
Dec 24, 2008
I have a column using Vlookup to find values that I want to SUM.
Some of the look up values produce a #N/A and result in a total sum of #N/A.
How do I get the SUM of a column of numbers when all of the cell values are not in fact numbers.
View 3 Replies
View Related
Nov 20, 2009
I have one Column (Col A) which has a list of values. In Col B I would like to filter out the values in Col A based on some criteria. For example, below I would like Col B to show all of the records in Col A where the LEFT six characters = "Active".
Col A:
Inactive_Jim
Active_John
Active_Frank
Inactive_Betty
Inactive_Lucy
Active_Tina
Inactive_Jill
Active_Tom
Col B would result in:
Col B:
Active_John
Active_Frank
Active_Tina
Active_Tom
I'm sure this is elementary, but I can't seem to figure it out.
View 4 Replies
View Related
Aug 16, 2007
I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.
Sub Findall()
Dim y As Long
Dim starta As String
Dim tr As Long, tc As Long
Dim sr As Long, sc As Long
Dim s As Worksheet, t As Worksheet
Dim SourceCell As Range
'Setup
Application. ScreenUpdating = False
Set t = Sheets("Target Sheet")
Set s = Sheets("Search sheet")
Set SourceCell = ActiveCell
Do While IsEmpty(ActiveCell) = False
Counter = 1
'Get last used row in Target Sheet
t.Select..........................
View 6 Replies
View Related
Jan 25, 2008
My code is always failing on the findnext method. I'm thinking that the findnext method fails because it loses it's cell reference when the row gets deleted.
Sub findwbs()
Dim rngFind As Range
Dim strFirstAddress As String
View 9 Replies
View Related
Jan 30, 2008
I have 2 spreadsheets, I need to collect the data onto 'figures 07' from column D on 'spreadsheet 07' by date, based on the name matching. ie cell B4 on 'figures 07' should be 166 and cell C4 should be 72. I've tried IF and LOOKUP but they don't give me the correct answer Auto Merged Post;Here is the second spreadsheet, it wouldn't let me attach both of them on my first message
View 4 Replies
View Related
Jun 8, 2009
I've got a piece of code I'm stuck on. Basically, I have a range of data and most cells are empty. However, I want to replace all the nonblank cells with an X. I can't quite figure out how to have the code replace something non-specific...
View 3 Replies
View Related
Jan 31, 2008
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
View 9 Replies
View Related
Jun 12, 2014
As part of my work as an intern, my company wants me to look at all of the office supplies ordered by their retail stores and find out which items are most ordered.
The invoice excel file I received from our office supplier has a column for the Item # and Quantity of that item. However, there are multiple occurrences of each Item # because this invoice is itemized by store. Is there a way to consolidate all of the values in the Item # with each other to remove the duplicates while also consolidating all of the quantities of each?
For example:
Office Supplies 2.PNG
The invoice is much longer and has many more different Item #s and many more duplicates but this is more or less the same format.
I used COUNTIF with an advanced filter with Unique Records Only selected but I realized that only gave me the count of the Item #s and didnt factor in the Quantity of each Item # ordered by each retail location.
View 3 Replies
View Related
Jul 31, 2008
1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace()
'
' Macro2 created by david
'
' for the entire sheet, moving from one cell to the next down the column, changing rows
' search for the contents in another sheet, and then if that is found,
' copy the row number to a variable, and then
' copy column K from sheet 1 to column N of sheet 2, using the same variable above
' after that same, but L goes to P.
'
'
Windows("file1.xls").Activate
Rng = Selection.Rows.Count
Dim toFind As String
ActiveCell.Offset(0, 0).Select
Application. ScreenUpdating = False
Dim i As Integer
For i = 1 To Rng
Windows("file1.xls").Activate
toFind = Range("A + i")
Windows("file2.xls").Activate
View 7 Replies
View Related
Jul 27, 2013
Is there a way to find specific values and change their colors all at once in xls?
For example, if it looked like:
1 4 5 3 7
4 2 6 3 1
5 9 2 6 4
And if I tell it to change every 4 to red, it'd be like:
1 4 5 3 7
4 2 6 3 1
5 9 2 6 4
Or changing the cells' color would be ok, too.
View 1 Replies
View Related
Feb 21, 2013
I am trying to sum certain values in one column based on the values of another column. I made a few tables, generated some random numbers, and then I started writing up an if-then statement to see if I could get what I am trying to do to work. However, I was having difficulty getting the program to run, because I was declaring more than one variable (I think).
So for instance, I want cells in column G to sum forces in column C when a joint in column E matches a joint in column A. Similarly, I am trying to do the same thing for columns F and B.
I have attached a picture, which shows what I would like for the program to do automatically (rather than me doing it all manually)! I didn't include the code I wrote, because it was so minimal
Attachment 51660
View 3 Replies
View Related
Apr 7, 2014
I'm currently working on a spreadsheet that contains 30,000 leads and their respective companies and i need to filter out any leads that work for companies present in a different list of companies (1,834 companies). Basically, i need to filter column A so that it only contains companies present in column B. Is there a way to do this using the advanced filter?
View 1 Replies
View Related
