Pick Up The Vendor Code Of Part Code From Looking Highest Quantity Of Part Code

Mar 9, 2013

I have an excel file having part code,name,vendor and Qty ( Quantity ).

My problem is that I want to apply an excel formula to pick up that vendor code who have highest Qty of a part code.The condition is that S.No.should not be disturbed.This file is so large,but here I have taken an example,

View 2 Replies


ADVERTISEMENT

Multiple Lookup: List Of Part Numbers Based On The Product Part Code

Feb 12, 2009

I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.

=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})

so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.

View 3 Replies View Related

Protect Part Of The VBA Code

Aug 4, 2006

I understand that we can protect the VBA coding through check the "Lock project from viewing in the Tools>VBAProject Properties. However I'll still need to open some of the code for other users to customize the program while some of the important code are protected.

View 7 Replies View Related

Macro Code To Replace Part Of Formula With Value Of Certain Cell

Jun 18, 2014

Here is the code I'm working on:

I want this code to replace the value of s with the value of a cell.

sub Macro2()
Dim s As String

s= value of (cell F2)
Range("I8").Select
ActiveCell.FormulaR1C1 = "='[(s).xlsm]Payroll Computation '!R8C11"

End Sub

View 5 Replies View Related

Easier Way To Shorten Up Part Of Code That Is Repetitive With Array

Jun 3, 2013

I have a macro that works but was wondering if there is an easier way to shorten up the part of the code that is very repetitive with an array or ? Nothing I have tried works except the code below.

Code:
Sub ClearAndReset()
Dim WS1 As Worksheet
Set WS1 = ActiveWorkbook.Worksheets("Stocks")
WS1.Unprotect
Application.EnableEvents = False
With WS1

[code]....

View 3 Replies View Related

Enter Only Part Of A Zip Code And Have The Rest Auto Fill-in

Mar 3, 2009

i have an excel sheet where i enter company information including Zip code. the zip codes around here all start with 797 and end with numbers from 01 to 12

i am looking for a way to enter just the last 2 numbers and have it automatically insert the full zip

example:

line one i would enter 01 and 79701 would show up in the box.

I know there are ways to do this, just can't remember its been so long since I've had to use excel.

View 9 Replies View Related

Look Up Function Recognize The Vendor Code And Assign The Appropriate Name

Aug 8, 2006

I can only export vendor codes from the General Ledger rather than vendor names. If possible, I would like for excel to recognize the vendor code and assign the appropriate name. For example, HCC stands for Human Capital Consulting. The GL includes the vendor code and the voucher number. If I export the vendor code HCC/V0007 from the accounting system to cell A2 in excel, I would like for excel to pick up everything before the / (in this case HCC) and enter Human Capital Consulting in cell B2. I have a vendor list in excel that matches vendor code with vendor. I just need for cell B2 to pick up the vendor code from the list.

View 9 Replies View Related

2002 Code V 97 Code: Add A Small Workbook Open Event Code Which Works For Me But Debugs For The Others

Jan 27, 2009

I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..

View 2 Replies View Related

Cracked Vb Code: Prevent People From Accesing The Code I Protected The Code Blocking It From Visualization

Feb 8, 2007

I've developed a little software using Excel Macros & VB. To prevent people from accesing the code I protected the code blocking it from visualization. It seems not enough as an acquaintance of a friend cracked it in 25 minutes. Or so he says. So I'd like to know if there is a better way to protect the font code.

View 8 Replies View Related

Match Part Number Then Extract Quantity Onto A Different Sheet

Apr 3, 2014

I have 2 sheets in a file. One is given to me from our parts department containing all parts on a given truck model. The 2nd sheet is exported as a database file from inventor and imported as an update able sheet in excel.

I am needed to compare part numbers between the 2 sheets and the qty of each. So far I have it where it matches the part numbers and turns the ones I don't have in the model red. Now I'm trying to match the part numbers and pull the qty of said part from sheet 2, the imported one, and compare it to the to the qty in the 1st. All I really need to accomplish is matching the part numbers then copying the qty from sheet 2 to sheet 1 onto a new cell of the matched part number.

View 3 Replies View Related

VBA Code To Pick The Correct Sheets

Mar 31, 2009

I am having a problem with this script below. I think it is in the way the worksheet is picked. Can someone take a look and offer some advice on how to pick between the 2 sheets? I'm getting an error on this line in red below( object doesnt support this property or method)

View 14 Replies View Related

Pick Up Code Where It Left Off From Userform?

Oct 11, 2011

I have a VBA function that shows a user form. In the form, the user has to select a value from a combo box. Once they do that and click the submit button, I want to return to the next line in the function. So far I've been unable to accomplish this

View 1 Replies View Related

Find Word And Pick Up The Code?

Jan 18, 2014

I have codes (of three, four, or five digits) in Column A,names in column B, and names in column G.

The names in Column B and Column G are the same ones, but not in the same order, and they do not repeat exactly the same (e.g. I can have "Peter" in A10 and "Peter Jr." in A62, but not "Peter" and "Peter" again.

Each code belongs only to one name and never appears twice.

In K I want a formula that does the following:

K1: if the name in G1 is found anywhere in Column A, then bring the code that belongs to that name in G1.

(E.g.: If I have "Peter" in G1, and then "Peter" is found in B16 with the code "100" in A16, I want the code "100" of the A16, to come to K1).

View 2 Replies View Related

VB Code To Pick Best Pricing By Qty Column

Aug 20, 2008

I receive hundreds of part numbers to quote daily. I send out RFQ's to my suppliers and they respond with pricing. I gather all the data into a similar excel sheet below and assign the wining supplier.

in automating a task that will compare the group of data for best pricing and populate a "WIN" code in column "A" if that supplier was chosen for the that qty pricing.

Here is the excel example.

******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutI22=ABCDEFGHI1Scenario #1 - Supplier chosen for best pricing based on column "E"        2WINNERPART#VEN IDBRK1COST1BRK2COST2BRK3COST33 123ALL90110510107.54 123FO3511258107.755 123RO501958.51086WIN123AR651858.751087         8         9Scenario #2 - Supplier chosen for best pricing based on column "G"        10WINNERPART#VEN IDBRK1COST1BRK2COST2BRK3COST311 123ALL90110510107.512 123FO3511258107.7513WIN123RO501958.510814 123AR651858.7510815         16         17Scenario #3 - Supplier chosen for best pricing based on column "I"        18WINNERPART#VEN IDBRK1COST1BRK2COST2BRK3COST319WIN123ALL90110510107.520 123FO3511258107.7521 123RO501958.510822 123AR651858.75108Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

View 10 Replies View Related

VBA Code Required To Pick Value In Upper Cell?

Feb 25, 2014

I want a macro fill the value which is on the upper cell.

eg:If A1= Code and A2 is blank, A2 should be filled with A1 value which is 'Code'.

In the attached, I want C3,C4,C5 to be filled with 'A' which is in C2,

likewise I want C7,C8 to be filled with 'B' which is in C6 and C11 to be filled with 'C' which is in C10, likewise the data has to be filled in entire C col.

View 5 Replies View Related

VBA Code That Deletes All Data Except For Highest Value

Mar 27, 2014

What each piece of this code means and what it is doing? The more details the better

[Code] .....

View 1 Replies View Related

SUMProduct (182 Matches Part 1 Of Which 32 Match In Part 2)

Nov 18, 2008

Using the below formula. I know that I should get the result of 32 if I am dong this correctly (182 matches part 1 of which 32 match in part 2).

=SUMPRODUCT(--($A$1='7. PM BDE'! $J$3:$J$366))*(--('7. PM BDE'!$L$3:$L$366=1))

View 3 Replies View Related

Remove First Part Of String Of Text And Keep The Second Part?

Feb 12, 2014

Is there any way to remove the first part of a string of text in a cell and save the second part?

The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.

The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?

View 5 Replies View Related

Calculations To Manual Before My Code Runs And Set It Back To Auto When My Code Is Done Running

May 12, 2009

I am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?

View 2 Replies View Related

Excel 2010 :: VBA Code To Extract HTML Source Code Not Working On Google Sites

Dec 6, 2012

I have previously used the following code to successfully pull out IE webpage source code for string manipulation.

Its a crude example to demonstrate the principle:

Public Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Public IE As Object
Sub Sample()
Set IE = CreateObject("InternetExplorer.Application")
IE.Visible = True

[Code] ......

However when I substitute in a Google websites address into the IE.Navigate command, the code runs to the "Source_Code = IE.document ...." line then flags up a Microsoft Visual Basic error. "Run-time error '438': Object doesn't support this property or method"

The webpage that I am trying to access is a confidential company site, so you won't be able to access it yourself, but starts with [URL] ......

The one thing that I have noticed about this website is the Privacy Report icon in the lower right status window (Picture of an eye with a restricted symbol in front). I don't know whether this is the cause of my problem, or purely an incidental observation.

Is there something peculiar with Google sites that means that the source code cannot be extracted in general, or is this an issue specific to my site ? Does the Privacy Report icon have any relevance, and if so how do I switch that off ?

Using :
MS Excel 2010
IE Explorer 8.0

View 1 Replies View Related

Have Code To Block Save But How To Keep Code In Workbook Without Saving The File

Aug 1, 2013

My company has files that are already in use. I don't know too many details about how they work, but somehow saving the file will screw it up and my boss has to go back and reset something or other to correct it. Obviously it's connected to some other software somewhere. The code below will block Save and Save-As. BUT how do I get the file to hold onto the code without actually saving the file after the code is added (since the file shouldn't be saved)?

VB:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If SaveAsUI = False Then
Cancel = True

[Code].....

View 1 Replies View Related

Passing Variables And Values Between Sheet Code And Module Code

May 13, 2009

I have some buttons in different sheets in an excel file, each button has its own code, that is the reason I can not move the code related to each object to another location (sheet or module).

And I have one piece of code in Module1 (Auto_load) in order to execute automatically this routine every time file is opened. Inside "auto_load" routine I initialize some values of some check buttons,options buttons and positions of some objects in diferent sheets, but I can not pass the value of variables between Module and Sheet's code even when I declare as public variables and/or function.

I have the following structure: ...

View 11 Replies View Related

Code To Delete Rows Based On Status Code In Column

Jul 24, 2009

I'm trying to write a VBA script which will delete all rows in my Excel spreadsheet where Column I (which contains a status code) does not contain the word "Completed".

At the moment, I'm doing this the other way round: my script is able to search for entries in Column I which contain the status codes "Pending", "Awaiting Authorisation", "In Progress" etc and delete them. The idea is that when all those rows are deleted, I'll only be left with rows which have a status of "Completed". This works fine at the moment. However, the concern is that if a brand new status code is added to the data file, my script would be unable to pick it up and delete it. This is a small sample of the code I'm currently using (which deletes all the rows with statuses other than Completed):

View 4 Replies View Related

Worksheet_Change Code: Determine How To Get The Code Below To Fire Whenever Cell J10 Is Populated

Jul 30, 2009

I am trying to determine how to get the code below to fire whenever cell J10 is populated and do nothing when cell J10 is not populated but I can't quite get it. (Cell J10 is manually changed and is not changed based off of a formula)

View 4 Replies View Related

Standard Way To Organize Sections Of Code With Code Tags?

Jul 25, 2014

Is there a standard way to organize sections of code with code tags? Due to the nature of my work, there is a lot of documentation involved. And, my spreadsheets rely heavily on VBA. These code tag sections will be going into a design specification, so that there is a layer of traceability from the document to the program. These are the general sections or item numbers that I've come up with.

1. Dimensions and Variables

2. Data

3. Processing the Data

4. Rules of analysis

5. Analysis

6. Formatting

I guess I'm looking for something standard like UML diagrams for DFDs, but with tagging code to break them up into sections?

View 4 Replies View Related

Using Code To Email A Sheet But Need To Strip The Code Before Sending

Feb 2, 2009

I am using the code below that I got off of these forums to email a particular sheet in my workbook, but I need to strip all of the VBA code and the command button from the sheet being sent.

View 14 Replies View Related

Understanding Code (code In Eglish Specially After The .Count /14-1)

Feb 6, 2009

Can someone explian to me this line of code in eglish specially after the .Count /14-1

View 2 Replies View Related

VBA Macro Code Needed To Run The Code Contained Within A Cell

Dec 17, 2008

I have a macro that, when run, needs to read the contents of cell B5, and run the code that it contains.

Cell B5, for example, would contain the text:
Range("B13").Formula = "SUM(D12:D14)"

I need a macro to "execute this code", as if it were in the macro itself.

I have assigned the above to a variable, but am not sure how to execute it.

EG.


Dim the_calc
the_calc = Range("B5").value

Now, how do I run the_calc ?

View 9 Replies View Related

Lookup Function: Compare Every Part In The All Parts Worksheet To See If The Part Number Exists On The Active Parts Sheet

Dec 10, 2008

I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.

I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".

View 3 Replies View Related

Run Part Of Macro, Pause, Run 2nd Part

Aug 4, 2007

I have 2 basic parts to a Macro which need to be separated by a pause of 1 second, before proceeding to the next part of the macro. Then pause for 1 second, and loop.

Application.Wait is no good to me as the spreadsheet must remain live, editable, and receiving updates from an external program linked via DDE. Below is the ...

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved