Calculations To Manual Before My Code Runs And Set It Back To Auto When My Code Is Done Running

May 12, 2009

I am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?

View 2 Replies


ADVERTISEMENT

Circular Reference When Code Runs

Sep 4, 2009

I'm at my wits end trying to work out why I'm getting a circular reference when this code runs:

Private Sub TextBox1_Change()
Cells(Rows.Count, "K").End(xlUp).Offset(1).Value = Range(TextBox1.LinkedCell).Value
With Range("K5").Resize(40, 1)
.FormulaR1C1 = "=OFFSET(" & Cells(Rows.Count, "K").End(xlUp).Address(True, True, xlR1C1) & ",-(ROW(RC)-ROW(R5C)+1),0,1,1)"
.Value = .Value
End With
End Sub

The circular reference cell is K29. I have an "X" in K46 after which all the values in TextBox1 are copied.

View 9 Replies View Related

GIF Not Visible On UserForm While Code Runs

Aug 8, 2006

I have some code to put a GIF animation into a web browser on a userform. This works fine - on its own. However, once the GIF has loaded I want to run a whole bunch of code in the background. If I run the code all at once, the userform appears but the picture doest show - but when I place a breakpoint between loading the userform and the main sub routine of my code - the GIF loads and the animation is shown all the time my code is running in the backgorund.

View 4 Replies View Related

Macros Effected By Manual Calculations On Run?

Jul 7, 2008

I always use manual calculation with Excel, does it affect the calculation within a Macro when I run it?

View 9 Replies View Related

Code Runs Over And Over Again And Updating Pivat Table

Aug 28, 2007

I have some code sat in worksheet_change (or worksheet_pivotupdate):

If ActiveSheet.PivotTables("PivotTable2").PivotFields("Area").CurrentPage = "(All)" Then
ActiveSheet.PivotTables("PivotTable3").PivotFields("Area").CurrentPage = "(All)"
End If
If ActiveSheet.PivotTables("PivotTable2").PivotFields("Area").CurrentPage = "London & Essex" Then
ActiveSheet.PivotTables("PivotTable3").PivotFields("Area").CurrentPage = "London & Essex"
End If

The problem is that this code runs over and over again, as each time the pivot table updates, it constitutes another update, and so on and so on....

View 3 Replies View Related

Calculation Code For Calculator Runs Slow

Oct 1, 2006

I am making a small push button calculator to enter data into a textbox on a userform in an add-in file and this works fairly slowly. I am trying to concatenate a list of numbers in a textbox that simulates a calculator screen when entering numbers.

Private Sub CommandButton6_Click()
Dim Val
Val = "6"
Dim valand As Range
Set valand = ThisWorkbook.Worksheets("Stageing").Range("K65536").End(xlUp).Offset(1, 0)
valand = Val
Dim A As Range, B, C, d, E, F, G, H, I, J
Set A = ThisWorkbook.Worksheets("Stageing").Range("K2")
Set B = A.Offset(1, 0)
Set C = B.Offset(1, 0)
Set d = C.Offset(1, 0)
Set E = d.Offset(1, 0)
Set F = E.Offset(1, 0)
Set G = F.Offset(1, 0)
Set H = G.Offset(1, 0)
Set I = H.Offset(1, 0)
Set J = I.Offset(1, 0)
TextBox1.Value = A & B & C & d & E & F & G & H & I
End Sub

View 4 Replies View Related

Hide Code Actions As Macro Runs

Dec 8, 2006

I have written a macro which references to several different sheets and cells therein. The macro is assigned to a command button on 'Sheet 1'. When I click the command button, the screen flickers and the user can see the macro running all the commands I have written. Is there a way of stopping this - maybe replacing it with a static screen view whilst the macro runs?

View 3 Replies View Related

Code To UNPROTECT Then PROTECT Workbook When Macro Runs

Jul 24, 2014

Okay, I have this code and it works very well - but it only works if my WORKBOOK is unprotected. I know how to Unprotect then Protect an ActiveSheet, but I can't figure out how to Unprotect then Protect my workbook when the macro runs..

Sub BLM_RENAME_SHEET()
Dim WS As Worksheet
Application.ScreenUpdating = False
For Each WS In ActiveWindow.SelectedSheets

[Code] ......

View 9 Replies View Related

Code Runs When I Hide Rows Or Delete Cells

Aug 2, 2008

So i don't have any events that i know of that should trigger my macros to run. But everytime i delete a cell, or hide rows, it seems all my code/macros just auto run. And i had a few times when i hid the rows, the code would start, and then my excel application would crash.

View 4 Replies View Related

Code For Button That Runs Macros Dependent Upon Which Boxes Are Checked?

May 16, 2014

See attached file illustrating exactly what I'm trying to do.

I won't repeat the exact same things I wrote in the file, but the Summary is that I need to first make such that only certain check boxes can checked at any one time, then make the command button run certain macro(s) depending on which boxes are checked.

View 8 Replies View Related

Adding Columns With Manual Calculations To Dynamic Pivot Table

May 8, 2013

I have a problem as I need to present data with different data sources. I'd like the calculations to be as "automatic" as possible. The data consists of countries and regions and their sales pipe. The pivot table doesn't give me all the data that I need to present so I need to add extra columns with calculations and data from other data sources.

The problem I meet is that the 'total row' within each group needs to be reflected in my columns as well (F:G) It works as long as the data I've imported has the same amount of States within each group of Contry but if the number of states differs with the newly imported data - my "manual" columns are wrong.

(A;B;C;D;E;F;G;H)
Country;State; Red; Amber; Green; Quota; Total PV; Coverage;

I've created a Pivot table on the first 5 columns [Country; ...; Risk] (A:E)

The following columns are manually entered based on the pivot (F:H)

Quota (data source from another sheet)
Total PV (a sum of Red; Amber; Green in the Pivot)
Coverage (returns % of TotalPV/Quota)

For each group Quota and Total PV needs to summarize the above data within the group. I've 'hard coded it' today (SUM(F3:F5)) - F3:F5 can as well be F3:F8 or F3:F4 depending on the imported data. I have 8 different Countries (groups) with different amounts of States and 3 different sheets for each Region of countries so I need this summary to be automatic based on what group (Country) it belongs to. How can I make the calculation different so that it's dynamic as well as the Pivot table? Today it's not dynamic and it needs my 'hands on'.

Quota =IF(ISNUMBER(SEARCH("total";A6)); SUM(F3:F5); IF(ISNA(VLOOKUP(B6;Quota!B:F;3; FALSE));" ";
IF(VLOOKUP(B6;Quota!B:F;3; FALSE)=0; " ";(VLOOKUP(B6;Quota!B:F;3; FALSE))))).

View 1 Replies View Related

Pause Vba Code To Verify Calculations

Oct 10, 2007

I need to PAUSE my VBA code (about halfway through) in order to verify some calculations before I can allow the macro to finish running. If the numbers are correct, then I'd like the macro to finish running accordingly. However, if the numbers are incorrect, I need to be able to search my Excel file for the error (the error would be due to a format issue with the data that I pulled in), fix the error, and then let the macro finish running from the point it was paused.

Right now, I've got a Message Box that pops up asking me if the numbers are right and I have to answer YES or NO. I always answer NO so that the macro crashes -- this allows me to check the excel file without having to stop the macro. Once I've fixed the data problem, then I go back into my code and let it run to its conclusion.

View 6 Replies View Related

Web Style 'Back' Button VBA Code

Jul 20, 2009

I have been trying to get a back button to work on an 2003 excel document that works like a website.

In the web toolbar there is a facility to go back and forward (very much like using internet explorer). I want a button on the actual sheet that does this command. If i record a macro and click the web 'back' button it records the end result of the process, not the process itself -

eg if sheet 1 and sheet 2 link to sheet 3 and I click a hyperlink from sheet 1 to sheet 3 then create a back button on sheet 3 and record a macro by clicking on the web toolbar back button the macro records the end result - eg Application.Goto Reference:="Sheet1!R14C8". However if i then go to sheet 3 through sheet 2, the back button I created takes me to sheet 1 not back to sheet 2.

Anyone know the code I could use to make it actually go 'back' to the previous page?

View 13 Replies View Related

VBA Code To Repopulate All Data Back To Userform?

Mar 31, 2014

Any formula to repopulate the data back to userform for editing. I need the data to populate when a record is selected from a combo box [named URN for unique reference number]

View 5 Replies View Related

Code Not Resetting Cell Color Back?

Jun 13, 2014

VBA code in worksheet won't revert a changed cells color back to 0(white) after removing the comment.

Observations: code does set the desired cell colors to Yellow after inserting a comment, however removing said comment, and re-activating the worksheet does NOT reset the color after deactivating/re-activating the worksheet.

[Code] ......

View 2 Replies View Related

Macro Code With ScreenUpdating Off Turns Back On

Aug 8, 2008

A little context:
Searching this forum for "sleep", "delay" or "animation" will bring up a host of threads referring to the kernel32 function, sleep. This is a great way of putting small delays into code without the potential "synchronisation" problems of application .ontime calls or the "ugliness" of multiple-thousands looping.

My question:
When I call sleep (with values in the hundreds of milliseconds) several times in a macro, it seems like the computer just "gives up" screen updating after a few (maybe 50) iterations. The macro still takes the time I'd expect, accounting for all the sleeps, but it stops showing the intermediate steps and just shows the end result after the macro ends.

Is this something to do with RAM? Is there something about calling this command too much or too frequently that kernel32 doesn't like? Is my computer a useless bag of nails and spit?

View 3 Replies View Related

Macro/Code Required For Calculations Base On Pivot Tables Sum

Jan 29, 2009

What I required is either a Macro or Code for formulas in column 'F' in the attached spreadsheet that correspond to the SUM of each description and divided by 37.5 e.g. in F10 the formula should be =D10/37.5 the formula should be F12 D10/37.5 and so on all the way down the Pivot table

My problem is as the amount data increases on the Data Tab the formulas in column 'F' will become out of line with the corresponding Sum of each description so I guess I need some code or formula that check every time the Pivot table is refreshed.

View 3 Replies View Related

Parse HTML Code / Copy Image And Paste Back In Excel

Aug 6, 2012

I am attempting to navigate to a webpage using IE. I have been successful at getting to the appropriate webpage.

However, I would like to open a link within the webpage in the browser in another window(Which is an image). Copy the image then paste it back into excel. I have been successful at opening the webpage using a Userform.

Code:
Sub Anthro()
Application.ScreenUpdating = False
Set ie = CreateObject("InternetExplorer.Application")
With ie
.Visible = True

[Code] .......

The user input number for example:

If the user inputs the number 25423310 into the txtbox then it navigates to a certain webpage.

On this webpage and all other webpages where different #'s are used are very similar. The number (25423310) is always used to identify an image. However it has more characters. For example the image is always on line 30 of the HTML code. On this example the HTML code lists the image as:

The number used in the txtbox to naviagete to the URL Ex: 25423310) is always within line 30 of code in HTML. Is it possible to run a query or parse this line of code and direct ie to open this image in a new window then copy and paste it based on the criteria of the user input? Ex. 25423310?

Code:
Sub PropInfo()
Dim appIE As SHDocVw.InternetExplorer
Set appIE = New SHDocVw.InternetExplorer
Dim varTables, varTable

[Code] ....

View 9 Replies View Related

Code Changes Not Running

Nov 30, 2006

This is bizarre - over the last year or so, on two machines (one Win98SE/Off2K, the other Win2KSP4/Off2K3), very occasionally a change I've made to Excel/VBA code has been ignored (eg to add a MSGBOX call) - even after I've restarted Excel. The workaround is to add a blank line and remove it again in the actual code module, but its both annoying and intriguing,

View 4 Replies View Related

Slow Running Code

Nov 6, 2008

My code runs so slow! The sheet only has 233 rows and 6 of them are not in the loop.

View 6 Replies View Related

Message Box Before Running The Code

Oct 4, 2008

I need a message box with information before the code run. Yes - code run, No - exit code.

View 9 Replies View Related

VBA Code Not Running Automatically

Sep 28, 2009

I have written some code intended to automatically clear a cell when data appears in it from an external source. In one spreadsheet, it seems to work exactly as expected, ie when the cell is polulated, it immediately clears the contents. In another spreadsheet, with exactly the same code, it will not automatically clear. If I put it in debug mode and step through it line by line, then it does do as expected but otherwise it won't.

View 9 Replies View Related

ActiveWorkbook Code Not Running

Jun 29, 2007

I have used a code to find the character "-" and replace it with nothing ("") from several named worksheets across my workbook, which OzGrid helped me with before, and it worked fine. Now I've added the code into my module (at the bottom) it doesn't work. The rest of the code works fine, and it doesn't come up with any errors when I run it, but it just seems to ignore the 'find and replace' part of it.

Sub split1()

Dim fromSheet As Object
Set fromSheet = Worksheets(1)
Dim fromRow As Integer
Dim toRow As Integer
Dim lastRow As Integer
Dim errCount As Integer
Dim thisSectionName As String
Dim i As Integer ' loop counter
Dim rng As Range 'found range
Dim emptyCellAbove As Range
Dim rng1 As Range
Dim arng1 As String 'Address of 1st hit rng1
Dim ws(7) As String
Dim ii As Integer '2ND LOOP COUNTER
Dim iii As Integer '3rd Loop Counter

View 9 Replies View Related

2002 Code V 97 Code: Add A Small Workbook Open Event Code Which Works For Me But Debugs For The Others

Jan 27, 2009

I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..

View 2 Replies View Related

Cracked Vb Code: Prevent People From Accesing The Code I Protected The Code Blocking It From Visualization

Feb 8, 2007

I've developed a little software using Excel Macros & VB. To prevent people from accesing the code I protected the code blocking it from visualization. It seems not enough as an acquaintance of a friend cracked it in 25 minutes. Or so he says. So I'd like to know if there is a better way to protect the font code.

View 8 Replies View Related

Code For Running Total Using Only 2 Cells?

Jan 15, 2012

I'm trying to create a spreadsheet that uses one cell to enter a dollar amount and stores the amount entered in another cell. But I would like the input cell be zero after each entry, and the cell storing the amounts to keep a running total.

View 4 Replies View Related

If Statement To Stop Dim Code From Running

Apr 29, 2014

Attached is an example of the program. The purpose of this program is to allow someone with very little knowledge about the information to enter data. The first tab labeled "Instructions" is will have two macros assigned to the buttons at the bottom of the page. The first macro labeled "Move Data" will move data will clear data in the shaded cell on the "Entry Form" sheet and fill those cells in with '----. The second macro labeled "Generate and Save" will save a master copy of the program, save a historical copy of the program by date, and print/save a pdf copy of the "Reports" sheet.

Each one of the historical (the last 8 sheets of the program) sheet receives data from the "Entry Form" and then moves the data by date into the table for archiving purposes.

If you look at the code for the "Entry Form". I have a couple of subs. The first being Worksheet_change. the first section of this code is to force certain cells to be uppercase. This part of the code is working fine. The second part of the code is the Dim MyValues. This part is working fine also, but...

My issue is... When I run the move data macro from the "Instructions" sheet the Dim MyValues reads these as changes to the cells and wants to push the data to the historical sheets.

What I would like is an IF Statement above the Dim MyValues part of this code that stops the Dim MyValue part of the code running if those values are blank, 0, or have '---- entered into them.

Test.xlsm

View 3 Replies View Related

Code Running For Multiple Worksheets

Jun 27, 2014

I have the following code, I have it running to just work on Sheet 2 but I would like it to be able to run on mulitple sheets, not all but a range like from Sheet2:Sheet30.

[Code]........

View 12 Replies View Related

Running Code On A Hidden Sheet

Jul 13, 2009

I have placed the code I am using below. It takes values from a hidden sheet (PACTAct) and places them on a visible sheet (Email). The code moves between the two.

It works at the minute by unhiding the PACTAct sheet then at the end re-hiding it. However I don't want the user to see this sheet whilst the vba is running. Is there a way I can simply refer to the worksheet without unhiding it?

View 6 Replies View Related

VBA Code To Turn Off Another Running Macro

Jan 5, 2012

I have a macro, that basically runs a sub routine to count down say for example 1 min, at which time the workbook closes. However if the user opens one of the forms I would like to turn off the background timer macro. How can I do this with code? Is there code that does the opposite of 'application.run'?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved