Enter Only Part Of A Zip Code And Have The Rest Auto Fill-in
Mar 3, 2009
i have an excel sheet where i enter company information including Zip code. the zip codes around here all start with 797 and end with numbers from 01 to 12
i am looking for a way to enter just the last 2 numbers and have it automatically insert the full zip
example:
line one i would enter 01 and 79701 would show up in the box.
I know there are ways to do this, just can't remember its been so long since I've had to use excel.
View 9 Replies
ADVERTISEMENT
May 19, 2009
If I have 3 fields: zip code, city and state; is there a way where I can have the user of my form enter their zip code and it will populate both city and state. I have the data, I just dont know exactly how to code it.
View 9 Replies
View Related
Mar 13, 2008
I want a Macro to be able to copy a formula down from cell A2 down the entire column within the data range. But, the problem I've got is that the spreadsheets I'll be using the Macro on will be different sizes. Currently, the VBA looks like this:
ActiveCell.FormulaR1C1 = "= LOWER(RC[3])"
Range("A2").Select
Selection.AutoFill Destination:=Range("A2:A17340"), Type:=xlFillDefault
Range("A2").Select
So the "Destination:=Range("A2:A17340")" part copies the formula into all cells from A2 to A17340. Other spreadsheets might only have data up to cell A200, or Awhatever - is there a way of getting the macro to populate just the cells in column A but only where there is data adjacent in other columns?
Also, I want the Macro to be able to delete all rows wherever "DELETE" appears in a certain column - I had a look at the "Delete Entire Row Based on Criteria" Macro but I'm looking for a fully automated solution, rather than the question boxes coming up and asking which cell/criteria, I need to run this macro on multiple sheets and the criteria/column position will always be the same -
View 7 Replies
View Related
Mar 9, 2013
I have an excel file having part code,name,vendor and Qty ( Quantity ).
My problem is that I want to apply an excel formula to pick up that vendor code who have highest Qty of a part code.The condition is that S.No.should not be disturbed.This file is so large,but here I have taken an example,
View 2 Replies
View Related
Nov 17, 2012
Why this error is coming up on a macro. Now to what I'm trying to accomplish is I have 1 sheet called GDL and I want to pull certain data from that sheet into another sheet called data sheet. I have formulas set in the data sheet to pull the information I want. However, I want to create a macro to pull the data for those formula or I guess another way of looking at it would be a auto fill function, except with a macro button. Please see the following error I receive when trying to run the macro.
Run-time error '1004': Autofill method of range class failed. The following is the macro.
VB:
Sub ResetDataSheet()
'
' ResetDataSheet Macro
' Macro recorded 11/13/2012 by asdf
'
[Code] ....
View 5 Replies
View Related
Oct 8, 2012
I am not sure the correct term for this but the autofill drop-down menu that pops up when typing code does not come up for me.
Example:
Sheets("Form").combobox1.
I usually get a drop-down menu with a list of members of the "ComboBox" class.
Is there a setting for that enables/disables this?
View 7 Replies
View Related
May 23, 2014
When I enter data in the cells A1 and B1, C1 needs to calculate the result. (not copy and paste)
For examle: I have formula C1=(A1+B1)/2
C column for formula, but shows result only when there is a data in A and B
View 7 Replies
View Related
Feb 12, 2009
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
View 3 Replies
View Related
Jul 18, 2014
I usually just use macros to clean up Data from non-excel sources. So I wrote a macro to do this, but the process requires a date to be added, so attempted to do this via an input box. The input box works, but the code doesn't, clicking the button to which the macro is bound spits out an error 91 (object out of bounds?) when it hits the search function right after the inputbox code. Both bits work as intended separately, so I guess it's just some moronic formatting error on my behalf.
[Code] ......
View 6 Replies
View Related
Jan 10, 2008
In MS Query:
Like '%ST%DF%'
Works fine.and returns:
DOCIDREVISION
31ST-9DF02007
40ST-9DF01006
73ST-9DF01016
74ST-9DF01011
74ST-9DF02004
I want to use the [Enter system] for the DF part.
When I try to use the following in MS Query:
Like '%ST' & [Enter Sys] & '%'
the pop up window appears but after entering DF
I receive an error: Missing Right parenthisis or illeagal variable?
View 9 Replies
View Related
May 13, 2013
I have a cell built into my spreadsheet that serves as an error check (i.e. returns the word 'ERROR' if certain criteria are fulfilled on the spreadsheet). I'm trying to write something into a Macro that will check this cell and not allow it to run if it states ERROR, returning a dialog box to notify this, is this possible?
View 2 Replies
View Related
Apr 30, 2014
Is there anyway to automatically fill the empty added cell after inserting a row without using the fill handle? For example, for a series of numbers: [URL]
2. Drag the fill handle Selected cell with fill handle across the range that you want to fill.
Or running balance: [URL]
2. Extend the running balance formula into the new rows by selecting the last cell in the balance column and then double-clicking the fill handle.
View 6 Replies
View Related
Jan 9, 2013
I have a column chart in excel. I would like to fill in part of each bar based on a percentage.
View 1 Replies
View Related
Mar 12, 2008
Load Comboboxes With Variant Range using ListFillRange
I'm trying to implement this, but am getting a 400 error when this code runs....
View 7 Replies
View Related
Sep 21, 2007
I have a multicolumn listbox, and a multidimensional array.
I want to put just SOME values of the array into the listbox, but I ger errors using both .list or .column to access single items, and even using .additem .
I have:
dim variable(2000,2) as string
variable(1,0)="aaa": variable(1,1)="bbb": variable(1,2)="ccc"
variable(2,0)="www": variable(2,1)="awasd": variable(1,2)="asdfa"
....
variable(2000,0)="www": variable(2000,1)="awasd": variable(2000,2)="asdfa"
I don't want to store all 2000 elements, just some ones: how can I do it?
View 9 Replies
View Related
Nov 29, 2008
I would like to make a list of vehicles with auto servicing dates appearing in the next column. How can I do this, example would be say 30/11/2008 was the last service, next column would be next service due 30/02/ 2009 and then a column next to that to say when service was done.
Pretty simple but I can't seem to get it to auto bring up the next service date which would be in 3 months time or 90 days.
View 9 Replies
View Related
Jul 9, 2009
Does anybody have a formula to use to auto enter an alphabet? With this formula I would like the last letter in the alphabet Z to be followed by AA, AB, etc. If I delete row 5 (letter E) I would need the letters to auto generate in order.
View 9 Replies
View Related
May 21, 2007
I have attached a chart I'm working on. Each item is assigned a part number and it automatically takes away from the inventory each time an item is sold. I was wondering if the bottom half could work with the top to determine profit.
Example:
Customer purchases Part # 3 (C15) Quantity 1 (D15) for $450 (E15). Is there any way to set it up so whatever part number they enter...it subtracts their sold price from the cost (C5 through C11) to show the profit in (F15).
View 13 Replies
View Related
Oct 27, 2009
I've exhausted my search engine skills and I'm about 99.9% sure Excel is incapable. This message board has been great over the years of figuring out even the trickiest of problems, but is there any functionality in 2003 or the slight possibility that after a user inputs a number in a cell (no tab, no enter) that it will move to the next cell.
After reading about this, most people say it is not possible even with VBA or Macro, and I certainly believe it, but the whiny, and horrible department that I work for are curious if this is possible. So, is it? If this is the wrong area for this questions, I apologize, I was considering putting this in the Macro/VBA area, but I gave up in deciding where to post this.
View 2 Replies
View Related
May 28, 2014
What I want to do is if I add data into B7 or F7 then the current date will appear in J7. I also don't want the date to change every time the project is opened.
Thus,
If I enter "withdraw or any word" into B7 or F7 - The current date (4-Dec) would appear in J7.
then if I close excel and I open it tomorrow, J7 would still read as 4-Dec, while if I enter "deposit or any word" into B8 or F8, the current date (5-Dec) would appear in J8.
- would need to be able to enter multiple entries on one day as well.
- also i am not familiar regarding macros.
View 2 Replies
View Related
Jul 24, 2008
Here's a sample of a completed table I would like to have.
Sheet2 *ABCDEFGHIJKL68*# ofSTART*wk #wk #wk #wk #wk #wk #wk #wk #69ACCTWEEKSWKRATE1234567870110181 $ * * * *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 71110242 $ * * * *10.00 * $ *10.00 $ *10.00 $ *10.00 $ *10.00 ***72120143 $ * * * *10.00 ** $ *10.00 $ *10.00 $ *10.00 $ *10.00 **73120272 $ * * * *10.00 * $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 74120381 $ * * * *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 75130151 $ * * * *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 *** Excel tables to the web >> Excel Jeanie HTML 4
If given columns B and C, is there a VBA code that will look to those columns and auto-enter the payments across the week matrix based on that criteria?
View 19 Replies
View Related
Mar 18, 2009
I am trying to use VLOOKUP to auto-populate a description from an entered part number. After checking up on how to do this in several different places I applied this formula to the relevant cell but all that it returns is #N/A.
I am very confused as all seems to be correct, but I am new to this and I am sure I am missing something silly. :P
On entering a part number into cell C13 on sheet 'Stores Receipt' it should search and find that number in column A on sheet 'Product List', it should then return the adjacent description from column B on sheet 'Product List' and show this in cell C17 on sheet 'Stores Receipt'.... Sounds simple hey! :D
The formula used is:
View 3 Replies
View Related
Jan 28, 2014
I'm wanting to make a checkbook register. That part I can do (I am totally an Excel idiot, but I'm fairly decent with Google and I couldn't seem to find anything about this), but I'm wondering if auto-drafts are possible. What I'd like to do is have a table of regular auto-withdrawals (or deposits, for that matter) and then on the appropriate day have them auto enter into the register. Ideally, I'd like them to enter 2-3 days in advance, or even at the beginning of the month.
For example: Netflix on the 1st, Life Insurance on the 12th, Auto Insurance on the 15th, etc.
View 2 Replies
View Related
Dec 28, 2011
I have a excel sheet in it. Is it possible? That when in any cell I input data in a cell and press "enter" then it save automatically.
View 8 Replies
View Related
Jun 29, 2007
B20 is the number that the user enters. It can be any number and it will create new sheets below and text of sheet name in B21:F21.
If i change the sheet name below, B21:F21 would also automatically change.
View 9 Replies
View Related
Jan 3, 2014
I'm trying to create an autoupdating price list using a part number and a website. I've tried Excel's data import wizard.
Website: WebFLIS - Public Search
Sample data Category
Chaplain Kits
Item
Chaplain's Kit, Consumable
NIIN
9925-01-326-2855
Price
$276.94
Description
Also called the ReSuppply Kit
VBA Code that allows me to automatically open the page.
Dim IE As Object
Sub submitFeedback3()
Application.ScreenUpdating = False
Set IE = CreateObject("InternetExplorer.Application")
[Code] ......
Ideally, I'd like to click a button that says "Update Prices" and it will search WebFlis for the NIIN listed and update the price. I have 717 items on my list so updating would be by click only (I think I can write that portion).
If that is not an option, I'd like to be able to click on each item row (think hyperlink) and be able to see the results for that individual item.
View 9 Replies
View Related
Aug 22, 2014
I wrote below code, I am expecting column to be updated as 1, 2, 1, 2, 1 ,2 till last row, but it is updating as 123456...
[Code] .....
View 2 Replies
View Related
Jun 8, 2009
I need it to autofill just as if you selected range A1 and A2 and double clicked that little square on the bottom right hand side of the cell (so it stopps auto-filling at the last active cell in B)
View 5 Replies
View Related
Jul 3, 2008
I currently have this code ( which works perfect ) that was written by someone else. It performs an auto-fill in column "A".
I need to learn how to adjust this code to do it for other columns, but do not know currently.
Maybe someone could highlight of BOLD the adjustments to direct the code to the column.
Sub fill_rows_A_4()
Dim arrTmp As Variant
Dim lngRow As Long
With Worksheets("sheet1") 'adapt
arrTmp = .Range(.Cells(1, 1), .Cells(.Rows.Count, 1).End(xlUp))
For lngRow = 1 To UBound(arrTmp)
If arrTmp(lngRow, 1) = "" Then arrTmp(lngRow, 1) = arrTmp(lngRow - 1, 1)
Next
.Range(.Cells(1, 1), .Cells(UBound(arrTmp), 1)) = arrTmp
End With
End Sub
View 9 Replies
View Related
Sep 11, 2007
I am fighting with this for a longer time now and can't find a solution:
is it possible in Excel to generate a number sequence (to create a list for auto fill) representing numbers like this:
000001
000006
000002
000007
000003
000008
000004
000009
000005
000010
000011
000016
000012
000017
000013
000018
000014
000019
000015
000020
and so on till 001000
View 13 Replies
View Related
