i need to populate a field to show the month and year as follows: the data is entered in one field like this: 01/09/2006. i need another field to populate this: Jun 06. i have tried to use a few formulae but to avail. look forward to your response
View 4 RepliesIn attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
View 2 Replies View RelatedSo, this works perfectly by itself: {= SUM(IF(MONTH(I4:I17)=1,G4:G17,0))}
And this works perfectly by itself: {=SUM(IF(YEAR(I4:I17)=2007,G4:G17,0))}
But this doesn't work at all: {=SUM(IF(AND(MONTH(I4:I17)=1,YEAR(I4:I17)=2007),G4:G17,0))}
SUM by both a specific month, and a specific year from a single date field?
ending of this to get the value of a cell that is on the the same line(volatile) but in column BA
TextBox1.Value = ActiveWorkbook.Sheets(ComboBox7.Text).Range(ComboBox6.Value)
Where combobox6.value is the row number that I want but column BA is the cell
How to get only MONTH' YEAR if there is a DATE-MONTH-YEAR in a cell?
A1: 27-July-2012
Answer D1:JULY' 2012
Pl note "' " is suffixed after JULY (the month).
So I have some data that I would like to have average only if that data was entered in the same month and year as specified in another cell. What I have tried so far is:
[Code] .......
-RenewalMonths is a dynamic range where each cell in the range shows the month of the date in that row.
-RenewalYears is the same but for the years.
-RenewalOverallStuff is a dynamic range where I would need to average the data that meets the criteria.
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then
MsgBox ("You may not enter Data before the current Month")
Else '...... Run main code here
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx‎
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies View RelatedI have been trying to sum the data in each column on each tab of my workbook by month and year into one pivot table on a new summary worksheet within the workbook. In the summary pivot table, I would like to be able to select the description as labeled on the tab and a year or month and have the respective totals for each tab and set of columns displayed. The column headings may or may not be the same for each tab. I've been able to separate the data for each tab and summarize without dates or sum the data in columns by date via a pivot table, but I have not been able to consolidate the data for both tabs, with the option to select the month and year, in one pivot table.
View 2 Replies View RelatedI'm after a formula this time ... i've searched the board and can't find what i need.
a cell shows 2009 December
and i'd like a formula to covert this to 31st December 2009 .... i.e. for any cell i'd like to know last day of month... and month and year ..
I want it to average based on month and year. I have daily data and want to average everything for say January 2000 into one cell and February of 2000 and so on. Column A has date (mm/dd/yy) and column B has data.
View 13 Replies View RelatedA spreadsheet im currently working on has the following formula
=SUMPRODUCT(--('Data Entry'!G2:G6000="AAAA"),--('Data Entry'!L2:L6000="Jun 14"),--('Data Entry'!M2:M6000))
It works fine, apart from the bolded text. In the Data Entry worksheet, column L has dates in the format dd/mm/yyyy. I'd like to get any date from June to be included without manually changing every date in June to Jun 14.
I think theres 3 ways of doing this, any of which would be great. Heres what I think. Where "Jun 14" is searching for exact text, I thought maybe I could change it to MONTH=6 or something to pick out June direct from a dd/mm/yyyy format. I couldnt get this to work. Know of anything I could replace "Jun 14" with?I tried to change the format of the entire column L in 'Data Entry' to a 3 letter month and 2 letter year. how to change the cell date format to fit this?Or if I changed the format of the dates to "01 June 2014" could I change my formula to try and just pick out the specific text "June" ignoring the day and year?
I know there must be a way how, but I can't seem to get it right.
The other option I thought of was to create a new column in the Data Entry sheet using the formula =MONTH(A1), then changing the formula to search for "1", "2", "3" etc for each month. I didn't do this as for the purpose of this the exact date is NOT important, only the Month is.
I want to group data (rows) using month and year in date column using macro.
For example.
Date ID Amount
01/01/2013 12345 $100
02/01/2013 13452 $73
03/01/2013 12232 $50
04/01/2013 34232 $125
01/02/2013 12322 $67
02/02/2013 12345 $100
03/02/2013 13452 $73
04/02/2013 12232 $50
05/02/2013 34232 $125
01/03/2013 12345 $100
02/03/2013 13452 $73
03/03/2013 12232 $50
04/03/2013 34232 $125
I want to group rows by mm/yyyy in date column. Also I want sum amount column by month.
I have a detailed note inside biweekly.xls, it explains everything in context.
Two excel sheets, one is updated manually (Vikki's Yearly Averages.xls), while the other is for reporting (biweekly.xls)
The coding will all be in biweekly.xls.
First, it needs to take a date to the right of a name from biweekly.xls and use the month and year from that date for the search.
Then it needs to look in VYK.xls under the name and copy every entry starting in the year specified and month specified and ending at the current date.
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies View RelatedI have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
Attached File : Time and Attendance.xlsx‎
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
View 4 Replies View RelatedIn a sheet I enter the following:
... in A1 a year (say 2012)
... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
I'm trying to streamline some processes at work and have encountered a bit of an issue.
I have a source file containing a grid of data (9 columns) with a series of dates they relate to down the left side e.g. 13-Feb-2013. This data covers a whole year.
What I want to do is pull through data relating to a discrete month into a grid in a seperate workbook.
I have a feeling that date ranges and possibly some kind of lookup might be useful but am struggling to see how to pull it all together.
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
View 2 Replies View RelatedI use a certain portion of our workbooks to enter the due dates of certain equipment, which are always listed in month/year (e.g. 4/17), and which means that they are good until the last day of said month. That is, a due date of "5/16" is good through May 31, 2016.
I'd like for my users to be able to enter "5/16" and have that cell properly identify as May, 2016 (instead of May 16 of the current year)...more specifically, the last day of May, 2016. All of this so that I can conditionally format any cell where that date has past - that is, if my user enters "5/16" on May 15, 2016, it won't flag.
Serial No Search E220060926320061125420060612520070824620061026720061226820061127920061226 Excel tables to the web >> Excel Jeanie HTML 4
E - Year Month Date
I need F column as Month Date Year Format
I have 4 columns
Column A is "Customer Number"
Column B is "Date Can Opened"
Column C is "Month" (currently blank except header row)
Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
As To Why This Is Giving The Answer Of "January Of 2009"?
For All Answers.
Sheet7
RS92/27/2009January Of 2009102/28/2009January Of 2009113/1/2009January Of 2009123/2/2009January Of 2009133/3/2009January Of 2009143/4/2009January Of 2009
Spreadsheet FormulasCellFormulaS10=TEXT(MONTH(R10),"MMMM")&" Of "&YEAR(R10)S11=TEXT(MONTH(R11),"MMMM")&" Of "&YEAR(R11)
Excel tables to the web >> Excel Jeanie HTML 4
I am trying to create a master spreadsheet to sum up other tabs for the number of funds that are going operational by month. The date is formatted at "January 31,2013".
See attachment as an example : Client Schedule Example.xlsx
I have a list of dates (birthdays) in column A. IE
12-Jan-69
05-May-75
23-Apr-81
16-Feb-70
When I use the normal sort function it sorts the dates in year order.
In Column B, I would like a formula that ignores the year and puts them in Month order that runs from Jan to Dec. Something I can print and stick on a wall as the list of birthdays.
How do I 'countif' for a particular month of the year?
I have a long list of dates and need to count how many are in January, february etc.
I have a Pivot Table containing months and years. I would like to be able to sort the data by month & year.
Pivot Table  A3Month4Apr 20125Aug 20126Dec 20127Feb 20128Jan 20129Jul 201210Jun 201211Mar 201212May 201213Nov 201214Oct 2012
i need to set year and month to my sheet.
the sheet works like a paycheck report. So if it´s posible to do this i can go back in time and do my report.
now i use excel´s own date form serial number. so if i need to go back to 06 i need to type 2006-11-1 if i worked that day.
is it posible to format the sheet by typing in the year and month and the hole sheet works after that input?