I want it to average based on month and year. I have daily data and want to average everything for say January 2000 into one cell and February of 2000 and so on. Column A has date (mm/dd/yy) and column B has data.
View 13 RepliesI have a workbook with two sheets - DATA and SUMMARY.
DATA has two columns - date and data_value. Data will be added to this sheet on a regular basis
SUMMARY has two columns - month and average
In the column for average I would like a formula to calculate the average of data_value for each month without having to manually determine the range for the particular month.
So I have some data that I would like to have average only if that data was entered in the same month and year as specified in another cell. What I have tried so far is:
[Code] .......
-RenewalMonths is a dynamic range where each cell in the range shows the month of the date in that row.
-RenewalYears is the same but for the years.
-RenewalOverallStuff is a dynamic range where I would need to average the data that meets the criteria.
I am performing a given exercise every day in the month of march. I have the dates all lined up in my spreadsheet, with the sum at the bottom. What I want to do is have another cell that will give me my daily average of performance. For example today is the 2nd and I have performed this exercise 360 times, making my daily average 130 per day. If I performed 200 of the exercise tomorrow I would have a grand total of 560 repetitions making my daily average roughly 186 per day (the day, march 3 divided by the number of repetitions, 560) and so on and forth.
I need a formula that will automatically calculate that daily average as I progress with the month. But I want the calculation to stop at the end (i.e. I don't want it to continue as the year progresses, meaning the divisor keeps going throughout the rest of the year). Basically, I guess, I am looking to fill in the daily repetition and the divisor to increase each day as I do so. My average is to be displayed in cell B36, so today my formula should read (=2/B36) and on March 31st the formula would be (=31/B36).
I have an excel file with a large number of sheets with data, each sheet representing one day of a year. Is it possible to merge the daily sheets so that the entire year's data is in one sheet?
View 4 Replies View RelatedI have a large set of daily rainfall and evaporation data (see attached sheet) which I would like to sum into monthly data. I have previously been doing this in Access, can anyone show me a quick way to do it in excel?
View 3 Replies View RelatedLast week I posted a question related to formatting a cell to return a Day of the Week versus a numerical representation IE "Wed" instead of 02/20/2008 12:00AM. The solution provided worked for me:
1) Format cell to DDD MM/DD/YYYY HR:MN. Cell range (A1:A500)
2) Format destination cell with DDD. Cell range (B1:B500)
3) Destination cell (B1) = to original cell A1
4) B1 displayed data as "Wed"
However, the issue I still have is; I wanted to create a pivot table summarizing a year activity by Day of Week (in other words 7 entries for the year) and the pivot table still recognized all the MM/DD/YYYY. I ended up with a table displaying every day of the year instead of a yearly summary by Day of Week. Is there some way to strip out all the other numerical data from the new column I created to run a pivot table by Day of the Week for a whole years activity?
I have data in the following format (columns A & B):
Code:
Day Value
1/1/2002 2.1
2/1/2002 4.8
3/1/2002 0.1
" "
" "
" "
31/12/2011 5.2
I'd like to be able to write a formula so that I can get the daily data averaged over each month, e.g so that I have something like:
Code:
Day Value
Jan 2002 3.3
Feb 2002 4.3
Mar 2002 3.1
" "
" "
" "
Dec 2011 4.2
I'd like the data in monthly averages so that I can graph them. I have read about array formulas and averageif statements, but I can't seem to combine them to make them work.
I have a spreadsheet that contains developer related data. I want to be able to do a weekly analysis of average construction time and costs. The problem I am running into is properties enter rehab phase and exit rehab phase throughout the week.
For example:
I want to know the average $ spent and total rehab time week 1 of april. I may have 4 homes that entered rehab that week and 3 that move out of rehab that week. Moreover, I need to ensure those homes that entered and are still in rehab for that week are counted. How do I accomplish this feat?
I have two time series which span several years. The first series measures stock levels on every Friday (52 values a year). The second series measures the price level every weekday (260 values a year).
I'd like to condense the daily data in to a weekly average, can I do this easily? For example, I could manually use the Weeknum function to calculate the week number of each daily price data, then find the average daily price for each week, thus giving me 52 values which I can compare to the weekly stock series. Is there an automatic, fast way of doing this? Alternatively, I'd be happy to settle with a monthly average. Is this possible via macro's or does VBA need to be used?
I have 5 years of data in 2 columns:
Col A. Col B.
8/2/2004 Value 1
to
7/31/2009 Value n
I have a table set up as follows
1 2 3 4 5 6 7 8 9 10 11 12
2004
2005
2006
2007
2008
2009
I was wondering how I could construct a conditional statement to pull the associated values with the given month and year in the table...
I tried the following to no avail... I'm just getting a zero value:
=AVERAGE(IF(MONTH(J6:J1255)=AC$35,IF(YEAR(J6:J1255)=$AB37,K6:K1255)))
I collect unique prices each day. I am trying to find a way to determine the average of the numbers collected from the 21st of the previous month to the 20th of the current month. This formula will need to calculate for multiple months and years. So for example, I need Feb2008 average-which would be the average of numbers found between Jan21-Feb20, I then need Mar 08 average which would be data from Feb21-Mar20 etc. My spreadsheet is setup with the first column having the dates (ex. 01/01/08, 01/02/08 etc) and the second column containing the value for that particular date ($2.85, $3.00 etc).
As the number of days between the 21st and 20th change each month, I just can't seem to find a way to do it without a whole lot of manual effort.
i need to populate a field to show the month and year as follows: the data is entered in one field like this: 01/09/2006. i need another field to populate this: Jun 06. i have tried to use a few formulae but to avail. look forward to your response
View 4 Replies View RelatedI have been trying to sum the data in each column on each tab of my workbook by month and year into one pivot table on a new summary worksheet within the workbook. In the summary pivot table, I would like to be able to select the description as labeled on the tab and a year or month and have the respective totals for each tab and set of columns displayed. The column headings may or may not be the same for each tab. I've been able to separate the data for each tab and summarize without dates or sum the data in columns by date via a pivot table, but I have not been able to consolidate the data for both tabs, with the option to select the month and year, in one pivot table.
View 2 Replies View RelatedI want to group data (rows) using month and year in date column using macro.
For example.
Date ID Amount
01/01/2013 12345 $100
02/01/2013 13452 $73
03/01/2013 12232 $50
04/01/2013 34232 $125
01/02/2013 12322 $67
02/02/2013 12345 $100
03/02/2013 13452 $73
04/02/2013 12232 $50
05/02/2013 34232 $125
01/03/2013 12345 $100
02/03/2013 13452 $73
03/03/2013 12232 $50
04/03/2013 34232 $125
I want to group rows by mm/yyyy in date column. Also I want sum amount column by month.
I have a detailed note inside biweekly.xls, it explains everything in context.
Two excel sheets, one is updated manually (Vikki's Yearly Averages.xls), while the other is for reporting (biweekly.xls)
The coding will all be in biweekly.xls.
First, it needs to take a date to the right of a name from biweekly.xls and use the month and year from that date for the search.
Then it needs to look in VYK.xls under the name and copy every entry starting in the year specified and month specified and ending at the current date.
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
View 2 Replies View RelatedI'm trying to streamline some processes at work and have encountered a bit of an issue.
I have a source file containing a grid of data (9 columns) with a series of dates they relate to down the left side e.g. 13-Feb-2013. This data covers a whole year.
What I want to do is pull through data relating to a discrete month into a grid in a seperate workbook.
I have a feeling that date ranges and possibly some kind of lookup might be useful but am struggling to see how to pull it all together.
I am trying to create a macro (pretty new) to take a sheet of data and out put the average of each column by date. The data will be filled every month and the numbers i need should be one for the 1st, the 2nd and so on for each day.
Here is a sample of the data in the sheet, i would attach a spreadsheet but cant seem to find out how.
TimeStampUTC
Air Volts
Dry Volts
Dirt
Dirt Fraction
Temp
12/1/13 0:47
4.1180
2.3714
0.5735
-0.6800
11.1674
[Code] ............
I have 4 columns
Column A is "Customer Number"
Column B is "Date Can Opened"
Column C is "Month" (currently blank except header row)
Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
How to get only MONTH' YEAR if there is a DATE-MONTH-YEAR in a cell?
A1: 27-July-2012
Answer D1:JULY' 2012
Pl note "' " is suffixed after JULY (the month).
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then
MsgBox ("You may not enter Data before the current Month")
Else '...... Run main code here
I have a problem converting hourly data into daily data for electricity import capacity. My file has the following form:
| Connection | Date | Period | Available (capacity) | Where 'Connection' identifies the physical location of the capacity (4 possibilities, Germany -> Netherlands; Norway -> Nehterlands; Belgium -> NL; UK -> NL), 'Date' refers to the date, Period refers to hour of the day (e.g. 18:00-19:00) and 'Available' refers to the import capacity of electricity on that conncetion during that hour. I need daily aggregates and tried several things such as DSUM but I cannot manage I've shortened the attached file quite a bit because of the upload size restriction. I am using Excel 2010. I've tried some suggestions in similar topics but none worked for me.
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx‎
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
View 3 Replies View RelatedI'm after a formula this time ... i've searched the board and can't find what i need.
a cell shows 2009 December
and i'd like a formula to covert this to 31st December 2009 .... i.e. for any cell i'd like to know last day of month... and month and year ..
I have attached a tiny part of a massive data set I am working on. As you can see in column 2, the data is roughly every 15min for 5 days. The data I am interested in averaging is color coordinated in column 3 (if you scroll down you can see a different color for each day's data set.)
In column 5 the dates are summarized into days as opposed to the 15min breakdown. In column 6 is the problem. How do I get the averages of the relevant data in column 6 in such a way that I can drag the formula down and the next cell will automatically calculate the average for the NEXT day, REGARDLESS of how many temp readings there are, as this data fluctuates from day to day.
Excel Problem 2.xlsx‎
Basically i have month end data ranging from 31/01/2000-31/01/2009 with a value attached to each. I need to convert this data into a daily series with the month end value being the same throughout the whole month. I've been playing around with excel for a couple hours tonight
View 9 Replies View RelatedNeed to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies View RelatedI have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
Attached File : Time and Attendance.xlsx‎