Distance To Default Calculation Using Excel?
Mar 16, 2013how to to calculate the distance to default using excel. Or send e some previos work sheets that i can follow how it is done
View 1 Replies
ADVERTISEMENT
Minimum Distance Calculation Of Geographic Coordinates Using Array
Jun 9, 2006I am working on two spreadsheets, one we shall call Target Sheet and the other Reference Sheet.
On the target sheet, I have a set of 200 geographic coordinates longitude and latitude (in decimal degrees). Each pair of coordinates coresponds to a geographic site.
On the reference sheet, I have a set of 900 geographic coordinates longitude and latitude (in decimal degrees). Each pair of coordinates coresponds to a geographic site. Note that of the 900, 200 are the same from target sheet, other 700 are different sites.
Using the spherical law of cosines, I can calculate the distance between a set of coordinates on target sheet agianst a set of coordinates on reference sheet. This allows me to see the distance from one geographic site, to the other. This was easy. The formula I use is as follows: ....
Plan Path And Actual Path Distance Calculation?
Feb 11, 2014I am using an XY scatter chart that displays the planned path and an actual path as I go. The planned path is set up in 100' increments and goes 12000' and actual path varies along the way.
My data that I use is the Northing (ft), Easting (ft) and Vertical Section (ft) for both the planned path and actual path.
I was wondering if there was an east way to get that information from the chart or if there is a formula that would allow me to calculate distance between the two points by using the data I use for my chart.
Excel To Calculate Distance In Miles Between Post Codes
Oct 22, 2011Excel to calculate distance in miles between post codes
Is there anyway of doing this?
How To Have Default Value Displayed In Excel List
Apr 2, 2013I created a drop down list in three cells for date, month and year using data validation.
But I need these cells to display by default DD,MM,YYYY.
what's the way to do it.
Change Excel Default Row Height?
May 28, 2013I want to set the default row height as 20.0 (not excel's standard 15.0). When I delete the contents in a cell that has Wrap Text property enabled, the row always reverts back to default height of 15.0 and this is too small. Is there a way to chnage the default?
View 6 Replies View RelatedSaving Default Settings In Excel
Aug 20, 2013I am working on lots of excels, with data queries from sql and pivot tables. Is there a way to set defaults to some settings in excel (not in this specific file).
To be more specific:
1. Import data from SQL: Refresh on opening, save password
2. Formatting of number to have two digits and a comma separator
3. Pivot table: when adding to values sum instead of count, refresh when opening the file
Excel 2007 :: Default Chart Size?
Jan 6, 2014I have excel 2007 and I came across the following difficulty:
If I create a graph (or a chart) the default size is "Letter". However, I can switch this "Letter" to "A4" which I need and then create a template. But I always have to manually choose this template for new charts. However switching this any time I create a new chart is a rather bad way to cope with. Even clicking on set as default obviously does not cause to have A4 size for new chart, it still has got size of Letter when adding a new chart.
I assume the solution could be in XLStart templates, but it probably doesnt work for charts that you add. Or at least I didnt find any clue on the internet for this problem.
Excel 2007 :: How To Change DEFAULT Values
Mar 3, 2011If I want to format a cell I go to that menu. Choose formatting number.
The default value will appear with 2 decimal digit.
I want to change it to 3. How can I do so?
Is it possible to change the DEFAULT values that Excel 2007 offers?
Excel 2013 :: How To Restore Default VBA Libraries
May 21, 2014Any way to restore the default reference libraries that are checked the first time you open Tools => References in VBA in Excel 2013. I think I accidentally unclicked something that's necessary to run the program, and I can't find a "default restore" option or anything of that sort.
View 8 Replies View RelatedLaunching Excel In Separate Windows As Default?
Aug 16, 2012Each time I click on an Excel file the worksheet will open up within an existing Excel worksheet that I have open. This is frustrating when you are working with two monitors or screens (laptop screen and additional monitor) and want to view each worksheet separately in separate screens. What I end up doing, which is not efficient, is I'll open the second worksheet which will open up in an existing worksheet that I have open and then I'll close it, and then launch a separate Excel worksheet and pull open the recent file and I'll have two open worksheets (not within same Excel worksheet I already have open). This allows me to grab and pull one worksheet in a separate screen and leave the other as I need both open on two monitors.
Question: is there a way to default Excel when opening or double clicking an Excel file to automatically open in a separate instance of Excel and not in an existing open worksheet?
Default Excel File Type When Opening?
Mar 21, 2014is it possible to change the settings on your computer so that when you open Excel, it opens it as a certain type of file? I like working with .xlsb because I work with large sets of data all of the time and find that they open faster and are faster to work with. Currently every time I open Excel, it opens as .xlsx.
View 1 Replies View RelatedExcel - Default Tab Delimited Text File
Jul 14, 2014When I converted excel to text file via VB code, the default text file is tab delimited. Why is it so?
I've done:
Code:
Sub ConvertToText()
ActiveWorkbook.SaveAs Filename:="E:EXCELTEST.txt", FileFormat:=xlCurrentPlatformText, CreateBackup:=False
End Sub
Can I change the default delimition to pipe, how can I do this? How can I make an excel file to pipe delimited text file in default?
Excel 2010 :: Default File Location Not Working?
Apr 19, 2013I'm using Excel 2010. When I go into the Excel Options, to the Save option and try to type in a specific network drive in the Default File Location: box, I click OK and then it doesn't save the changes. I close Excel down all the way and then restart a new Excel session and it keeps going back to "LibrariesDocuments..."
It doesn't seem to be just related to Excel...having the same issue in Word and Access 2010 as well.
Excel 2010 :: Changing Default Text Box Settings?
Sep 5, 2012When I place a text box in Excel 2010, the default is for everything to be locked (Box is locked AND text is locked). I want to change the default setting so that when I start Excel fresh, anytime I place a text box the "LOCK TEXT" box is UNCHECKED.
There's a place where you can select "Set as default text box") after you make the changes, but it's not sticking (even in the same document without closing. IE, I make the changes to a text box, then click the option that says "Set as default text box", place a NEW text box immediately in the same document but the text is still locked.
Excel 2007 :: Default Settings For Drawing Shapes?
Jun 14, 2013how to change the default settings for shapes in Excel 2007? I select a line tool and it is a blue color and I would like to have its default as black
View 6 Replies View RelatedCalendar Control On Excel Worksheet - Default Start Date
Jul 9, 2012I have set up a calendar control on a userform and got it to pop up when selecting one of 3 cells on a worksheet. The various bits of code making this work are below.
This code is attached to the Userform.
VB:
Private Sub Calendar1_Click()
With ActiveCell
.Value = Calendar1.Value
[Code]....
What I am struggling with is that I'd like to have the calendar that pops up in cell C18 (which is Date of Birth) default to starting on 1st January 1987 not todays date. Also, if there is a value in either of the 3 cells that use the calendar, then I'd like the calendar to display that date. If the cell is empty then todays date is fine for cells G3 and G26.
Excel 2010 :: How To Reset Workbook Default Format To General
Jan 25, 2011Using Excel 2010 - I have a large workbook with multiple worksheets - been using it succesfully every day for a long time. All of a sudden every empty cell, and any cell not specifically formated in every worksheet has a default cell format of Time. Any new workbook created is OK.. defaults to 'General' - But, if I add a new blank worksheet to this particular workbook it defaults to 'Time' format. How did the default cell format for this workbook become set to 'Time' from 'General' and how do i fix it?
View 2 Replies View RelatedExcel 2010 :: Changing Default Blank Page Settings?
Apr 23, 2012My office recently upgraded to Office 2010 and we would like (in the accounting department that I work in) to change the default number formating in a blank sheet to Number, 0 Decimals, using seperators, from the current default of general format number.
I have looked for the Book.xltx file to replace but can't see it any where.
Excel 2010 :: Disable Default Close Button In Workbook
Jun 3, 2014How to disable the default close button in a workbook not to affect in my command button close.
I tried already cancel = true but my command button close is also been canceled.
Excel 2010 :: Date Picker To Default To Named Range
May 6, 2012I am new to VBA. Using Excel 2010. I have a date picker on a userform named LtPayCalFm1. I have created a named range on a sheet within the workbook called LQD which is a date. I want the date picker to show the date LQD when the form opens. The code I have is
Code:
Private Sub LtPayCalFm1_Initialize()
Dim LQD As Range
DTPicker1.Value = LQD
End Sub
I get Run time error '380': Invalid property value How do I correct this?
Excel 2003 :: VBA Radio Button Reverts To Default State
Mar 13, 2014I have an excel file containing 50 sheets which we use as an accreditation test. Each sheet contains one question to which there are several possible answers. These answers (for example, A, B, C and D) are option buttons and when a user selects one, that selection is recorded as their response which is then marked. After answering a question they click a NEXT button to move on and as they move on the previous sheet (question) is hidden so they only ever see the current question sheet.
This has worked well for us for a few years, but we have just noticed some odd behaviour on ONE SPECIFIC sheet. The option button the user selects on that sheet (it is actually question 13 in the sequence) is not stored after the test is completed. However on every other sheet, the selection is stored fine - just this one sheet. The properties of all objects on the rouge sheet are the same as the other sheets. I have duplicated a working sheet and tried replacing the question 13 sheet to try that, but the problem persists.
I tried deleting that Q13 sheet and running the test without it and the same problem occured but this time on the preceeding sheet (question 12) which suggests it is not the actual sheet that is causing the problem.
This is the vb code we have on each sheet
Option ExplicitDim Response As StringDim q13 As IntegerPrivate Sub cmdQ13_Click() q13 = 0
If optq13a.Value = False And optq13b.Value = False And optq13c.Value = False And optq13d.Value = False Then
Response = MsgBox("You must answer Question 13 by selecting one of the options!", 16, "More Information Needed !")
[Code] .....
So in this example there are 4 option buttons and 1 command button. It is no different to the other 49 sheets
Excel 2010 :: Highlight Active Row - Change Default Border And Fill?
Jan 13, 2013Using Excel 2010. Is it possible to change the default line thickness and fill color when selecting the ActiveSheet Target Row below?
I would like a thin border and a light grey fill - without interfering with any fomatting or conditional formatting that has been applied to the worksheet.
Excel 2010 :: Change Default Pie Chart Colors In Recorded Macro?
Mar 20, 2014I am working on a project where I am virtually almost finished except for a minor change with the pie chart. I am analyzing some data and recorded a macro to do this and also the pie chart for visualization. However, I do not like the color of the default pie chart colors and would like to customize it. How could I change this within the macro I have recorded?
[Code] .....
Excel 2011 :: Change Default Formats Of Number Selections In Tool Bar?
Jul 28, 2012In the toolbar there's a section titled "Number" which allows you to change cell formats with selections named General, Number, Accounting, Date, Time, etc. I want to permanently change some of their default formats.
For instance, currently when I select Number the default is -4000.00. I want to PERMANENTLY change its default to (4,000.00). How do I do this?
Excel 2013 :: Inserting Link In Cell Changes The Default Font Type And Size?
Feb 23, 2014I used Excel 2013 and Win 8.1
When I insert a Hyperlink in a cell, this changes the Default Font Type and Size
Excel 2010 :: Changing Default Chart / Graph Format Copied When Pasted Into Word?
Aug 28, 2012I work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
Excel Calculation System With Two Factors
May 8, 2014I am making an Excel calculation system where I have two factors (weight and opening length), which is essential for which lift there is possible to use.
There are 8 models each of which may have some limitations in terms of weight, and the opening length:
ModelPushing/pulling Force (KG)Stroke Length (mm)
HCV 130 350
HCV 230 600
HCV 330 800
HCV 430 1000
HCV 550 350
HCV 650 600
HCV 750 800
HCV 850 1000
What I am looking for is a formula, that when you enter numbers in two cells "Weight" and "Opening distance" of what their platform is to meet, then all the models that have the potential to accomplish this task pops up.
Example: A client writing a weight of = 40 kg and opening length of = 450 mm. The formula should then show which model that meets the requirements.
In this case: Models that meet the requirements for the lift.
ModelPushing/pulling Force (KG)Stroke Length (mm)
HCV 650 600
HCV 750 800
HCV 850 1000
Excel 2007 :: Calculation Of TAT Between Two Dates
May 30, 2014I have a Billing Data where i want to Calculate TAT between two dates in Excel 2007.. I received the Invoice from Vendors on specfic date but due to discrepances, i rejected the invoice, after few date i received a rectified Invoice from Vendor... so how can i calculate the TAT from 1st Receipt to Rejection..
Column A Column B Column C Column D Column E Column F
(Receipt Date) (Rejected Date) (Re-Receipt Date) (Rejected Date) (Final Receipt Date) (Formula for Finding
Rejection TAT)
E.g : In Column F, TAT to be calculated from 1st Receipt Date to Rejection Date, but if i received the rectified bill & after inputing the Re Receipt Date in Column C, then the Cell in Column F will remain blank, but again if it is rejected due to some error, & after mention the 2nd Rejection Date in Column D, then the TAT to be calculated from 1st receipt to 2nd Rejection (Column D), but if i received the Final Rectifed Invoice & after mentioning the Receipt Date in Column E, then the Cell in Column F will remain blank.. but pls note, if the invoice is not rejected the, the Cell in Column F will remain blank..
I have tried IF Forumula but in vain.. i can only nest 1st receipt to 1st rejection i.e : =IF(AB6= "", "",(TODAY()-AB6))
Calculation Using Macro ( MS Excel 2007 )
Jan 6, 2008I want to do simple calculation using Macro in MS Excel 2007..
All the data is in Sheet1 ( Which is 13a ), the calculation is in Sheet2 ( Which is work ) and the result of the calculation will come out in Sheet3 ( Which is result )..
Here is my coding..