I want to know how to index a drop down list to be used for calculations.
Up until now I was using
Range("B1").Select 'the cell where the drop down list is
ActiveCell.Formula = SiteID 'site id
But for whatever reason it trims a trailing zero from SiteID when setting it in the second line. SiteID is a VBA string.
Indexing it would work, as would preserving the zero so help on either one is appreciated. Auto Merged Post Until 24 Hrs Passes;Correction, I lied. I was using this line to set it.
Range("B1").Select 'the cell where the drop down list is
ActiveCell.FormulaR1C1 = SiteID 'site id
I made an excel document for my boss with the list of the furniture in an flat that we will rent. The document will be signed by the the guest of the apartment and will be used if anything at the end of the renting period is ruined or is missing. It's kind of insurance. The problem is that next to the cell with the list of furniture I made a list of hyperlink connected to the photos of the furniture. Everything is working on my computer where the photos are in a folder that is contained in "documents" but as soon as I try it in another computer placing the folder again in the document folder it doesn't work. It says "the file is missing". I just realized that I need a dynamic path but today I have to handle the excel file and I don't know how to do it and to change the path of every link with just few clicks I have no time to change photo by photo (there are like 300 pictures).
I start an Excel program from a shortcut in different folders. I know that I can find the path of the Excel program in "Parent.Path". But I don't know how to find the path of the folder the shortcut was in. It should be findable because when I try to do something like <Save>, Excel knows the correct folder there.
An example: I open Excel in "Folder 1" using a shortcut to the Excel Program in "Folder 2". Parent.Path tells me "Folder 2". How do I find out what "Folder 1" is from inside Excel?
i am wanting to automaticaly remove a file from a directory when this directory is populated and move to another directory that is secure, how would i do this? just say directory 1(where it will be removed from) is s:/ddc/reports
I am using some code to loop through a folder and extract some data from a specific sheet.
Now say a user moves the file to another folder etc... The macro will pull up an error, now is there a way i can have it dynamic linked to the spreadsheet so no matter what folder it gets moved to,
My folder path will adjust to that or need to take another route?
I have two pieces of code that each work, but I am struggling to combine the two.
I started with Ron de Bruin's code to attach multiple files to an email and then found more code that will loop through a folder to attach multiple files to an email.
Essentially, I would like the structure of Ron de Bruin's code, with the ability to have folder paths in the cell range, rather than file names.
Here is the code that works to loop through a folder, but it only works when I have the paths listed in one column, not in a range (e.g. columns C-Z)
Code: Sub Send_Indv_Files() Dim OutApp As Object Dim OutMail As Object
I have a report send to me daily. And I want to have a macro to save this report in the daily folder, such as “c:
eports8052008”, so tomorrow 's folder would be “c:eports8062008”.
All the daily folders already exist. Just need to change the file path. I tried some codes including sPath and format(now(), “mmddyyyy”), get error message.
Essentially, the Engineering Dept has given me 550 AutoCad files I have dumped into a folder located in this path: C:/DrawingsDump
From these 550 DWG files I need to manually filter and separate 260 drawings that I actually need to use and move them to a folder located in this path: C:/DrawingsFiltered . This manual filtering process takes a lot of time and is tedious work and it has got to be done everytime Engineering changes drawings because they are not kind enough to provide me a delta list.
In Excel 2003 I have setup a list of all 260 drawings I am interested in and that I call my filtered list. Is it possible to create a script that will enable Excel 2003 to compare my filtered list to all of the files inside C:/DrawingsDump, and then copy only those files that match to my Excel Filtered list and then paste only matching files into the C:/DrawingsFiltered folder?
If Excel 2003 can't handle this, is there a third party application that will let me perform a file management function like this with minimum startup time?
My Excel 2010 spreadsheet contains client data like the below:
A B C D E
What I'm trying to get from this is a personally addressed email with 2 attachments, one will be standard to all recipients and one will be unique and specific to that recipient. The filename of the unique attachment will contain the reference but will have some other stuff in the filename as well on either side that I will not be able to remove.
In terms of the file locations the unique ones will be in subfolders of the folder holding this workbook and the generic one will be in the same folder as the this workbook.This is some adapted code that solved a similar problem (in Excel 2007 though) on a different website.
VB: Sub Mail_Report() Dim OutApp As Object Dim OutMail As Object [code]....
In that case the file started with the "reference" field but in my case it is in the middle and the formats vary depending on the provider, there will only be a maximum of 5 providers but I would like to avoid 5 different macros if at all possible so I need a search function of some sort.
I’m working on a project using Microsoft Excel 2010 and I want to add some features to facilitate saving and retrieving files process.
1.How can I save the daily created workbooks (Assume 15 files a day) in order to contain the current date (and time if possible) linked with certain cell(s) I have at my workbook forming the file name? (XYZ 2-4-2014) and/or (ABC 2-4-2014 23:11) and so on …
2.I’ve been through some other posts and I found VB code which saves the active file into specific path, but it is only useful for single workbook because multiple files are getting overwritten automatically. Is there a code which allows multiple/different files saving & creates daily folders?
I am using an XY scatter chart that displays the planned path and an actual path as I go. The planned path is set up in 100' increments and goes 12000' and actual path varies along the way.
My data that I use is the Northing (ft), Easting (ft) and Vertical Section (ft) for both the planned path and actual path.
I was wondering if there was an east way to get that information from the chart or if there is a formula that would allow me to calculate distance between the two points by using the data I use for my chart.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
I have up to 50 workbooks in one folder with data in a specific range. I also have one workbook which includes additional data, including conditional formatting and dropdowns. I need to copy the desired range from the first workbook in the source folder to the second workbook, then save the latter to my destination folder, using the same name as the first. I need to repeat this process for all workbooks in the source folder.
I have an Excel VBA Macro for creating/logging drawing numbers. Each drawing belongs to a job number. Each job number has a folder name containing the job number followed by a description (ie 999999 - bracket assembly) for storing drawing pdf's. The job number is only known as a 6 figure number in the drawing creation process BUT for the PDF saving process it is a string value...as my example above
I have to change my process by pre-creating the Job Number folder, then have the macro look for the appropriate folder by searching the parent folder for a sub folder containing the job number (always the first 6 figures).
I want to insert in my macro some code that searches...
The parent folder for a folder containing the job number. The macro value for the parent folder is P:engineeringdrawings (this never changes). the macro value for the job number is iOpenair (it's an entry that is entered as start the macro). Imagine the value for the job number is "999999"...so the search would be for "999999*.*" The code needs to search the parent folder, find the folder name that begins with a six digit number. Capture the complete name of the folder and store that name as a Dim value that I can call up elsewhere in my macro.
I have a variable ("DestFile") that defines a path to a file (used in saving the file)...
I'm in the process of getting a Sub to hyperlink to this file, but in some circumstances, I may only want to hyperlink to the folder, not the actual file...
How would I go about trimming the "DestFile" address to get a "DestFldr" address?...
An example of "DestFile" might be; S:BryanFor KenGulf ConstructionST0609014-t.xls (the file name length may vary) What code can I use to consistently trim it back to; S:BryanFor KenGulf Construction as the "DestFldr" variable?
I am creating a document for work that automatically generates hyperlinks to pdf files in a given sub folder. Currently I have a section of code that opens a window to choose the folder location.
Code: 'Prompt user to select a directory Do Problem = False Set ShellApp = CreateObject("Shell.Application"). _ Browseforfolder(0, "Please choose a folder", 0, "c:\")
On Error Resume Next
[Code] ........
What I actually want is to not have the window open, but excel automatically choose the sub folder location.
The directory looks like this Z:ClientProjectDRAWINGS-2 RECORD COPIESPDF
The xlsm file is stored in the DRAWINGS folder, and I need it to point to the PDF folder.
I have a list of items in an excel sheet... 500 of them... and there are images for them in an other folder... The problem is those images are in 1000's and I only need those 500 images.. Images are saved as "SKU.jpg eg NS2354.jpg and we have an SKU column in excel as well .. SKU and their images have same name...
Is there any solution to pick up only those 500 images from those thousands of images?
Is it possible to save those 500 images in an other folder?
I would like to create a code that will open all workbooks in folder "A" one at a time and then close the work book after another code is executed. So one workbook will open and while the workbook is open, I will call another code to format the active workbook and then the active workbook will be saved in folder "B" and closed and go to the next workbook in folder "A" to start all over. The folders are saved on the desktop.
What I'm hoping to do is just look for the 4 digit number on the end finding that folder name and opening it up. The name conventions before the 4-digit serial number are quite random. Sometimes it includes their full first name, other times it's just an initial for the first name and other times there are other characters included in the name. The one thing that is constant is the 4 digit serial number on the end.
how I could get the Open dialog box to pop up and have the chosen folder number open?
