I am currently completing work for a senior manager who has the tendency to show off to the other seniors about various ideas/spreadsheet programs, usually at the expense of myself, the creator.
Is there a way I can put my name on a particular worksheet, and (even better) any charts that are created using it?
I'm not trying to be spiteful; just trying to get my name known as these things are passed around the whole company.
I am tring to make a macro that will find all charts in a worksheet and delete them.
the macro is essentilally a monthly refresh that cleans out a template of charts that were pput in the previous month. As the chart names and the number of charts might vary from month to month I just want simple code to select all charts in the worksheet and delete them.
With the above code, is it possible to trasfer all selected charts, on to a new spreadsheet and print them to fit on one page Landscape, no margins?? Or is that stretching it, i tried it but i print them all A4
View 2 Replies View RelatedI need a macro to create the following worksheets and charts from an Excel data set:
Three (3) worksheets (already created manually in attached Excel file):
1. Chart Data.
(a) Column A in Chart Data is always numbered 1 - 600 (50 years x 12 mos/yr).
(b) Column I and column Y data sets (from Prod_Month) created in Chart Data. Each data set can be identified and collated with column F in Prod_Month (API) which is unique for each dataset.
2. Rate vs. Month - plot of Daily Gas (col. Y in Prod_Month) vs. Months (col. A in Chart Data).
3. Rate vs. Time - plot of Daily Gas (col. Y in Prod_Month) vs. Calender Time (col. B et. al. in Chart Data)
At a minimum, could someone help me create the Chart Data worksheet from the data in PROD_MONTH? Charting all the columns takes time from Chart Data but any data manipulation macro(s) help.
I am working on a huge amount of data and want to analyse that data through charts because charts are quick representation of the data and save a lot of time. I got some code from my friend, to read each row in a worksheet and plotted the corresponding chart on the new worksheet each time i.e., each row has one chart which is plotted on new worksheet each time.
But I don't want it to plot the chart on the new worksheet. I want it to plot the chart on the same worksheet. In my case there are always more than 30 rows, so it should draw 30 charts on the same worksheet in which 30 rows are written.
Here is the code which plots charts on the multiple sheets
Code:
Sub LineCharts()
Dim Ws As Worksheet
Dim NewWs As Worksheet
Dim cht As Chart
Dim LastRow As Long
Dim CurrRow As Long
Set Ws = ThisWorkbook.Worksheets("Sheet3")
LastRow = Ws.Range("A65536").End(xlUp).Row
[Code] ....
Does anyone know why, when I copy a Worksheet (right click Worksheet > Move or Copy > Create a copy), Excel occasionally fails to copy across the embedded objects contained within the Worksheet (e.g. Charts, Command Buttons, etc.)?
This is very frustrating, and I'm wondering whether it's the way my Worksheet is configured, or whether this is a known bug.
I have a spreadsheet with multiple pivot tables and graphs. Is there a way to add a scrollbar on one sheet so that when you scroll through it, it will display(one by one) each graph that I created with the pivot table(s) so that they're all on one page(still dynamic) as opposed to them being on multiple worksheets
View 2 Replies View RelatedI have created a powerpoint that has linked charts from excel. Stupidly, I have saved both of these files (powerpoint and excel) on my desktop.
I need to save them on another drive (so they can be accessed by others) but i am worried that if i move the original excel file, it will break the links for the charts in the powerpoint file....
I have over 150 charts so I don't fancy going through and re-pasting each chart.
My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
I am trying to put some charts into a report that is pivot table based. I have some code that will work if the pivot tables stay stagnic but the users may change the tables around so that could be an issue of new data. I have the following code where I changed the source to the pivot table name (general name because of numberous report possibilites). I have taken out the other charts because they are just a variation of the chart 1. I am crashing on the line with the * on it.
Sub UWTierChart()
Dim oCell As Range
Dim oChart As Chart
Set ws_data = ActiveSheet
'Chart 1
Sheets(wsPT).Select
Range("B21").Select
[code]....
I have never done this before and I am having a hard time - it seems that none of the graphs in the Excel menu accommodate what I want and I have no idea what I am doing to boot.. Could someone PLEASE help?
My data is: American & Japanese workers can each produce 4 cars a year. An American worker can produce 10 tons of grain a yr. / Japanese 5 tons of grain a yr.
Each country has 100 million workers.
Need PPF and Opportunity cost of car & grain from U.S and Japan.
I have at this for two days and I cannot get the information in the chart the way it is supposed to be. It makes no sense evry way I have tried it and the graphs don't even look correct. I've tried several line graphs and scatter graphs..
I update graphs/charts everyday. I've been looking at ways of updating a lot of charts in 1 action.....
What would the formula be to have the range of the chart (ie =Data!$BS$1188:$BS$1201) to get the row numbers, not the row, from numbers entered elsewhere on a data sheet (ie =Data!$BS$1188:$BS$1201)
As a lot of the time I use the same number range but on different rows and sheets.
I'm trying to find a way to select all charts in a worksheet and pasting them into a new sheet as a jpeg and can't find a way to select the charts all together as a group like if you shift click them.
I'm looking to copy and paste them as a group because they are grouped in a specific way for a report.
I have 2 charts on one sheet. Both the charts are generated using 2 different VBA code. I have also created a Button to trigger the code and generate chart when the button is clicked.
I recently realized that I was creating charts upon charts and was making the excel file bigger in size all the time.
So, I wanted to see if I can delete the individual chart before generating a new one.
Currently, I am using the following code to delete the charts.
I am having lots of issues with generating a scatter chart in vba. I tried recording a macro but the only thing that recorded was my different selection clicks on the chart. No formatting was recorded. I have the following ....
View 12 Replies View Relatedif marco recording of chart manipulation has been reintroduced in XL2010
View 6 Replies View RelatedI have a piece of code that arranges a chart to fit the data it should show. The code used to work perfectly in the old Excel version, but after an "upgrade" to Excel 2007 I get "Automation Error" from the line where the scale type is set.
View 5 Replies View RelatedI don't mind paying for the add-on/add-in, I need to have a chart displayed of 100 rows and 1000 cells of data.
View 6 Replies View RelatedI have a spreadsheet that calculates a value for each age up to 65 on a separate row. I have parameterized the spreadsheet so that depending on the age entered by the user, any row below the age 65 calculation row is blanked out (set to "") with an if statement.
After a new age is entered I would like a line graph to compare the values. My problem is that if I select all of the possible data values (I assume none are less than 20, therefore there are 45 rows of formulas) any rows that have blank values show up in the chart. My data starts in cell A1.
I would like to come up with a macro that accomplishes the following . . .
- determines the number of the lowest row that has a number value in it (since there are formulas below this, Ctrl down does not do this correctly)
- set a named range starting from cell A1 based on x rows (calculated in the prior step) and y rows (constant)
I've got a table which has additives in Column A and products on Row 1. There are 13 additives and 10 products. Each combination of product and additive has a price. So I have 130 different prices in my table. The prices change monthly and the new prices are added to the sheet so that last months prices will move to left so that the newest price data table is A1:J13 and previous month is K1:T13 and so on.
I need to make an individual chart to every combination which contains the history of the price changes. I have two cells (A20 and B20) where the user can pick a product and an additive (created a menu by using Data|Validation...). These selections are combined in a cell C20 (=A20&B20). Then I have a macro that is linked to the cell C20 and is basically Case Is = 1st combination --> Call Macro1, Case Is = 2nd combination --> Call Macro2 etc.
That macro will work out just fine, BUT is there any way I could make all the 130 charts easier? Now I've recorded a macro that creates the first chart and then I've just copy-pasted it, changed the attributes (cell numbers, names and so on) that define the data to the next charts. This will take ages...
Every combination will have at least 13 changes (12 monthly price cells and the name of the cart) so in total this will mean about 1500 manual changes. In my case this will mean a high danger of typos.
I know, it would be SO much easier if I could give you the Excel file to look at...hopefully you understood what I mean.
I'll only follow the changes within a year so prices older than a year will not be shown in the charts.
Now I need to create multiple pie charts based on data in tables on many sheets.
I need to create the same set of charts, for each sheet separately.
I recorded a macro for one sheet, which created following
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlPie
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).Name = "='GALLERY ON 4TH'!$B$2"
ActiveChart.SeriesCollection(1).Values = "='GALLERY ON 4TH'!$D$6:$D$8"
ActiveChart.SeriesCollection(1).XValues = "='GALLERY ON 4TH'!$A$6:$A$8"
Range("A11").Select
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlPie
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).Name = "='GALLERY ON 4TH'!$A$6"
ActiveChart.SeriesCollection(1).Values = "='GALLERY ON 4TH'!$B$6:$C$6"
ActiveChart.SeriesCollection(1).XValues = "='GALLERY ON 4TH'!$B$5:$C$5"
ActiveWindow.SmallScroll Down:=3
Range("A11").Select
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlPie
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).Name = "='GALLERY ON 4TH'!$A$7"
ActiveChart.SeriesCollection(1).Values = "='GALLERY ON 4TH'!$B$7:$C$7"
ActiveChart.SeriesCollection(1).XValues = "='GALLERY ON 4TH'!$B$5:$C$5"
However I cannot automate. I tried different methods for creating the charts, as found on the site [prefer .chartobjects.add(x,y,z,a) since I can immediately position the chart] , but get stuck at seriescollection everytime.
It looks like when the chart is created by XL (with suggested data in it) I cannot address the series data.
I got it right to generate a chartobject that is empty, then added the series data to it, but when opening the new chartobject, it is again populated with suggested data.
How do I generate an empty chartobject everytime, so I can insert seriescollection info with code?
Any other way to generate charts?
Excel / Word 2003.
I am exploring yet another avenue of vba coding that i am not familiar with.
I have a template word document that i am wanting to fill with items (be it cell values or charts) from an excel file.
I am looking at the coding examples on the net and i am slowly getting there. However i seem to be unable to copy a chart from my excel file and copy into word. I need to be able to specify a specific position on the word document too.
Has anyone seen this problem before;
I used a "MID" formula to extract some data and for some reason the chart I'm trying to use won't recognize the data. Here is a copy of what the data looks like. Non of the vaules will show up on the chart.
DPJE2DD2CE2CJan1.2784.8984.8997.65Feb1.2697.6597.6591.79B10==MID(B$3,8,5)Mar1.3091.7991.79154.7Apr1.28154.7154.7147.6May1.29147.6147.687.78Jun1.4387.7887.78112.6Jul1.39112.6112.6115.2Aug1.42115.2115.293.6 Sep1.3393.6 93.6 138.9Oct1.28138.9138.9NovDec115.6YTD1.32115.6115.6
How do I get my charts to update everytime, the data refreshens...I have my series linked to several worksheets within a workbook.
View 9 Replies View Relatedi am trying to add 50 new data series and it takes hell of a lot of time to do it manually.
Sub Macro6()
Dim total As Integer
Dim Taper As Integer
Taper = 2
Do Until total < 100
total = total + 1
Taper = Taper + 1
ActiveSheet.ChartObjects(" Chart 3").Activate
ActiveChart.PlotArea.Select
ActiveChart.ChartType = xlBubble
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection("Total").XValues = "=Data!R" & Taper & "C6"
ActiveChart.SeriesCollection("Total").Values = "=Data!R" & Taper & "C8"
ActiveChart.SeriesCollection("Total"). Name = "=Data!R" & Taper & "C9"
ActiveChart.SeriesCollection("Total").BubbleSizes = "=Data!R" & Taper & "C7"
Loop
End Sub
I have lots of charts in a sheet "plots" which is based on data in sheet "data Summary". Sheet "plots" have the following code, which is based on the event "actiavte". At the end my main macro, I am activating sheet "plots" and all the charts are working fine. After this if I go to any other sheet in the workbook and come back to "plots", all the charts are flickering and the cursor turns to busy mode. I don't understnad why this is happening.
Private Sub Worksheet_Activate()
For Each ChtOb In ActiveSheet.ChartObjects
ChtOb.Chart.PlotVisibleOnly = False
Next
ThisWorkbook.Worksheets("plots"). Range("e1").Activate
On Error GoTo Handle
With ActiveSheet.ChartObjects("s21max").Chart.Axes(xlCategory, xlSecondary)
.MinimumScale = Application.Average([s21high]) + -4 * Application.StDev([s21high])
.MaximumScale = Application.Average([s21high]) + 4 * Application.StDev([s21high]) + Application.StDev([s21high]) * 0.25
.CrossesAt = .MinimumScale..........................
I need to export serveral charts to several slides within PowerPoint from Excel Using VBA. I use 2002 versions. I added chartobjects (2) under 1 but not sure if that is the correct placement to start adding more charts to slides.
Private Sub CommandButton1_Click()
'Sub PowerPointOLEAutomation()
Dim ppt As Object, pres As Object
'Create a Microsoft PowerPoint session
Set ppt = CreateObject("powerpoint.application")
'Copy the chart on the Chart Labels Demo sheet
Worksheets("sw dr").ChartObjects(1).Copy
'Worksheets("sw dr&ot").ChartObjects(2).Copy
'Create a new document in Microsoft PowerPoint
Set pres = ppt.Presentations.Add.........................
Excel Chart can fit various trendlines in a given set of data. For example we can get linear, as well as exponential trend line for same data set.
How do I decide which trendline best represents the trend in data? Shoud R Sq be used as parameter to see the best fit?
I have a chart which has Autoshapes linked to other cells in the spreadsheet above each bar on the chart. Is there any way of making them dynamic, so that if the value of the bar changes, the Autoshape will move up or down with that bar?
View 4 Replies View RelatedIs it possible to build 1 chart that holds 2 different pie charts? If possible I need to do this with VBA. The pie charts will have the same "components" the only thing that would vary is the percentage of each component (some values will be zero in one of the charts).
View 2 Replies View Related