Add-in That CAN Create Big Charts Of 100 X 100

Apr 21, 2013

I don't mind paying for the add-on/add-in, I need to have a chart displayed of 100 rows and 1000 cells of data.

View 6 Replies


ADVERTISEMENT

Create Multiple Charts With VBA?

Aug 18, 2012

I'm trying to create multiple Charts with VBA, each chart on a seperate Sheet. The link below works but i need to change it some and i'm stuck. What i'm trying to do is create a new sheet for each new graph, but I need it to create a graph for the 250 associates in column B then plot 52 weeks of their % from the Row their name shows up in. First name is in (B3), his % data is in range (N3:BO3). I have the weeks numbered out 1-52 in (N2:BO2) and i'd like their name to appear in the Tab and on top of the graph. I applied the VBA code from the link below to my sheet and changed what i knew i needed to change, but it debugs. I use to do each graph manually when i had 25 associates but i would like to use this for the whole building now.

[URL]

View 9 Replies View Related

Create Dashboards Or Charts

Nov 13, 2009

how to create dashboards or charts. I am looking for similar website like http://www.datapigtechnologies.com/. this is very good website for those of you who need to do some fancy staff with excel.

View 2 Replies View Related

VBA To Create Pie Charts For Top 10 Of Each Location

Feb 23, 2014

Basically I want to have a macro to loop through and make all the pie charts for each location but only for the top 10 of each location.

I also want the legend to be more precise for example, for London the first one in the legend should show:
Column C + "-" + Column I + "-" + Column J

Which would be: London - Rol9 -13

Instead of it being: London data rol9 13

Attached is the document in question where I've made the graphs manually : Example_Pies.xlsx‎

View 3 Replies View Related

VBA Macro To Create New Worksheet, Charts, Etc.

Oct 23, 2008

I need a macro to create the following worksheets and charts from an Excel data set:

Three (3) worksheets (already created manually in attached Excel file):

1. Chart Data.
(a) Column A in Chart Data is always numbered 1 - 600 (50 years x 12 mos/yr).
(b) Column I and column Y data sets (from Prod_Month) created in Chart Data. Each data set can be identified and collated with column F in Prod_Month (API) which is unique for each dataset.

2. Rate vs. Month - plot of Daily Gas (col. Y in Prod_Month) vs. Months (col. A in Chart Data).

3. Rate vs. Time - plot of Daily Gas (col. Y in Prod_Month) vs. Calender Time (col. B et. al. in Chart Data)

At a minimum, could someone help me create the Chart Data worksheet from the data in PROD_MONTH? Charting all the columns takes time from Chart Data but any data manipulation macro(s) help.

View 14 Replies View Related

Create Pie Charts And Save As Image?

Jan 29, 2013

Create an individual pie chart for each row of data (roughly 2000 rows in master list). Data to be charted contains 2 cells (Benefit and Salary). Once the chart is created I need to save the chart as an image (assuming it will need to go into Paint or another program?) Once the images are created and saved to a folder I can add the image link (file location) to a merge document data source. This way I will be able pull in the pie chart (now a picture) with a merge field during a mail merge.

Sample Data
Employee
Benefit
Salary

[Code]....

View 2 Replies View Related

Create Charts And Use Same Formatting For Colours

Apr 7, 2013

I normally create charts and use the same formatting for my colours i.e. Gradient fill with Shadow etc...

Now each time i create my charts i am having to keep do the formatting again and again and if i create a new spreadsheet with charts i have to do it all over again

Is there any way i can save this formatting colour so i can quickly apply to my chart series etc?

View 2 Replies View Related

Create Dymanic Charts Or Graphs

Jul 10, 2009

I'd like to put a spinner button on a chart that will change the x-axis date range. The data is in day/month/year format, but ideally I'd like to have the spinner button move in 1 year increments. The most recent date should always be present and changes should just impact how far back in history to go. I have basically no experience with vba coding, so please be as thorough and simple with your responses/solutions.

View 2 Replies View Related

Macro To Create Dynamic Charts

Dec 22, 2006

i want to create dynamic Excel Charts in one sheet ,The sheeet contain dynamic columns and rows and i want to create for each 4 columns a chart in a new sheet ,i started to try it in VBA and didnt founs the way to select 4 columns as a range, i succeseed to do it with msgboox that the user enter the range but i want to do it in a loop

View 9 Replies View Related

Create Charts/Based On ListBox Value

Jun 10, 2008

i am having a problem of updating my graphs in the application i devloped, my application is like this, go to sheet 1 click showuserform button and suer form contains combo and list box select the sheetname in the combo and select two values in the list and click plot.it plots the graphs acording to the selected values but my problem is it makes a newchart every time when we select a new week range it is getting stacked...it is not getting updated with the most recently plotted graph ??? i am facing this problem when i am opening my application in other computer...u can see my problem when u open my application. i am attaching my workbook and this is the code i used for making the chart

Sub MakeChart()
Dim rng1 As Range, rng2 As Range
Dim gs As String
gs = ComboBox1.Value
Application. ScreenUpdating = True
'First selected
For i = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(i) Then
Set rng1 = Columns(1). Find(ListBox1.List(i))
Exit For
End If
Next
'Last selected
For i = ListBox1.ListCount - 1 To 1 Step -1..............................

View 4 Replies View Related

Loop Through Ranges To Create Multiple Charts?

Apr 2, 2014

I am having an issue with looping through data ranges. Below is a subset of my macro. What I require is for LegendRng to stay the same and DataRng to move after each loop.

However everytime the vba runs through a loop, the previous range is recorded i.e. the source data for the chart is "A1:D5" instead of "A1:D1, A5:D5").

[Code] .....

View 1 Replies View Related

Automatically Create Set Of Charts From Block Of Data

Jul 12, 2012

I have a quite big database as a result of a study in Excel 2010. There is a special block of data for every participant in the study, including 16 data series in 16 lines. I have to make a unique chart for every line.

One block is bulid up in a way, that every row is the input for a chart, with the exception of one "spacer" row, which is empty.

Name
1 2 3 4 ...
A
B
C

D
E
F

For example in the sample above, there should be 6 line-charts (A, B, C, D, E, F) next to the block.

Can a macro be written, so I can automatically create the chart-set by selecting the block's upper left cell and running the macro? Or is there any easier method?

View 5 Replies View Related

Using Excel VBA To Create PowerPoint With 4 Charts In Each Slide

Aug 2, 2013

I am trying to write a macro that goes in an excel file that creates a powerpoint presentation, and puts four (4) charts in each slide.. I currently have a code that is pasting all of the charts in the same slide and I can't figure out why it isn't working (side note: I haven't attempted to resize or relocate the pictures on the powerpoint slides yet)..

Code:

'Add a reference to the Microsoft PowerPoint Library by:
'1. Go to Tools in the VBA menu
'2. Click on Reference
'3. Scroll down to Microsoft PowerPoint X.0 Object Library, check the box, and press Okay

'keep button in same location
Set btn = ActiveSheet.Shapes("CommandButton17")
With btn
btLeft = .Left
btTop = .Top
End With

[code]....

View 2 Replies View Related

VBA Macro Code To Create Multiple Charts

May 9, 2009

I need to create 63 charts from data which I have in two columns. I want to create multiple charts using one macro. For the first chart I want it to use cells K2:K80 as the x values, and M2:M80 as the y values. For the next chart I want it to use cells K81:K159 as the x values and M81:159 as the y values. For the next chart I want it to use cells K160:K238 as the x values and M160:M238 as the y values. I want to continue this, creating a chart for every 78 cells of data, all the way until the 63rd chart which uses K4900:K4978 as the x values and M4900:M4978 as the y values. I have created the following macro by " recording." This macro generates the first chart that I want:

Sub Macro5()
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlXYScatterSmoothNoMarkers
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).XValues = "=Sheet1!$K$2:$K$80"
ActiveChart.SeriesCollection(1).Values = "=Sheet1!$M$2:$M$80"
ActiveChart.ChartType = xlXYScatterSmoothNoMarkers
ActiveWindow.SmallScroll Down:=-3
End Sub

How can I alter this macro to create all 63 charts?. It seems like there is an easy way to do this, but I don't use macros very much (at all).

View 2 Replies View Related

VBA To Create Charts/Graphs From Non Continuous Ranges

Aug 12, 2008

I have an excel sheet populated with loads of values. There is a space between each set of data. I need to draw a graph for each section and i cant work out how to do it. I have attached the sheet in question. The gap between each column has "space" written on row, which is needed to prevent it being deleted. The drawing of the graphs needs to be automated as there is going to be 100's of sheets containg lots of data. The column size of each section can change so it needs to be dynamic. I have attached an example sheet

View 5 Replies View Related

Create Multiple Graphs/Charts From Data Groups

Jun 26, 2008

I need to make a macro that creates a specified number of graphs depending on the file's number of data sets. I know the number of sets that are in the data, and I know the number of data points that were taken. Here is what I have:

Sub Graphs()
Dim Startpoint As Integer
Dim Endpoint As Integer
Dim count As Integer
Dim xStart As String
Dim xEnd As String
Dim NumberSets As Integer
Dim yStart As String
Dim yEnd As String
Dim DataSet As Integer
Dim Data
Startpoint = 11 'The first set always starts in row 11
Endpoint = Range("L4").Value + 10 'Thefirst set always ends after the value of L4+10
NumberSets = Range("L7").Value 'number of times I need the loop to work
count = 1..........................

View 2 Replies View Related

Create Macro To Pull From List And Then Update Charts And Print

Nov 1, 2013

I am trying to create a Macro to pull from a list and then update the charts and print. I have a list that has over 100 clients. I believe I need to loop but I am not familiar with VBAs at all. Below is what I am trying to accomplish.

Sub Update()
'
' Update Macro
'
'
Selection.Copy
ActiveSheet.Next.Select
Range("B2").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Calculate

[Code] ......

View 3 Replies View Related

Create Charts From Same Data But Each Based Ob Data Criteria

Aug 31, 2006

Hi, have a question regarding dynamic charts, specifically I am trying to create several dymanic charts based on data in a single column (So i can only say my first set of data will be starting a a set location in the chart, the rest has to shift down based chart data above it). This data should organized in charts depending on the data in several other columns. For instance, need to pull out values from column based some ID and some PartNumber. A sample excel or VBA would be much appreciated. I know VBA but do not know Excel VBA much.

View 9 Replies View Related

Converting Static Charts To Dynamic Charts

Jun 27, 2013

My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers

Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average

When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.

View 2 Replies View Related

Create Multiple Charts On Multiple Sheets?

Apr 14, 2014

The macro creates multiple charts from data in one sheet, but now when I'm trying to scale it up to multiple sheets, the previous charts created disappear. E.g Creates 5 charts for sheet 1 (can see them being created, using debugger mode), looping to the next chart and they are created but the first ones has disappeared! What am I doing wrong? I'm creating my chart by the following code:

[Code] .....

The startpoint variable is changed for every new chart within the one sheet and the outputsheet is changed when you change the sheet.

View 4 Replies View Related

Pivot Charts Versus Charts

Sep 5, 2012

I am trying to put some charts into a report that is pivot table based. I have some code that will work if the pivot tables stay stagnic but the users may change the tables around so that could be an issue of new data. I have the following code where I changed the source to the pivot table name (general name because of numberous report possibilites). I have taken out the other charts because they are just a variation of the chart 1. I am crashing on the line with the * on it.

Sub UWTierChart()
Dim oCell As Range
Dim oChart As Chart
Set ws_data = ActiveSheet
'Chart 1
Sheets(wsPT).Select
Range("B21").Select

[code]....

View 2 Replies View Related

PPF Charts

Jan 12, 2010

I have never done this before and I am having a hard time - it seems that none of the graphs in the Excel menu accommodate what I want and I have no idea what I am doing to boot.. Could someone PLEASE help?

My data is: American & Japanese workers can each produce 4 cars a year. An American worker can produce 10 tons of grain a yr. / Japanese 5 tons of grain a yr.
Each country has 100 million workers.

Need PPF and Opportunity cost of car & grain from U.S and Japan.

I have at this for two days and I cannot get the information in the chart the way it is supposed to be. It makes no sense evry way I have tried it and the graphs don't even look correct. I've tried several line graphs and scatter graphs..

View 11 Replies View Related

Create Macro That Can Create Dynamic Copy / Paste Loop?

Feb 12, 2014

I need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:

[Code] .........

You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.

FC_Macro_Sample.xlsm

View 8 Replies View Related

Need To Create A Button That Can Copy Cells, Create A New Sheet And Then Paste There

Jan 14, 2009

So I've got Sheet 1 with say

____A___B___C
1___m___i___c
2___r___o___s
3___o___f___t

I would like to create a button that can create a new sheet and paste A1 to C3 at the same location on the new sheet

and I need this to create a new sheet and do that everytime the button is pressed.....

View 11 Replies View Related

Updating Charts In 97

May 23, 2008

I update graphs/charts everyday. I've been looking at ways of updating a lot of charts in 1 action.....

What would the formula be to have the range of the chart (ie =Data!$BS$1188:$BS$1201) to get the row numbers, not the row, from numbers entered elsewhere on a data sheet (ie =Data!$BS$1188:$BS$1201)

As a lot of the time I use the same number range but on different rows and sheets.

View 12 Replies View Related

Selecting All Charts

Nov 26, 2008

I'm trying to find a way to select all charts in a worksheet and pasting them into a new sheet as a jpeg and can't find a way to select the charts all together as a group like if you shift click them.

I'm looking to copy and paste them as a group because they are grouped in a specific way for a report.

View 11 Replies View Related

Delete The Charts

Oct 28, 2009

I have 2 charts on one sheet. Both the charts are generated using 2 different VBA code. I have also created a Button to trigger the code and generate chart when the button is clicked.

I recently realized that I was creating charts upon charts and was making the excel file bigger in size all the time.

So, I wanted to see if I can delete the individual chart before generating a new one.

Currently, I am using the following code to delete the charts.

View 4 Replies View Related

XYScatter Charts In VBA

Dec 3, 2009

I am having lots of issues with generating a scatter chart in vba. I tried recording a macro but the only thing that recorded was my different selection clicks on the chart. No formatting was recorded. I have the following ....

View 12 Replies View Related

Charts In 2010

Jan 11, 2010

if marco recording of chart manipulation has been reintroduced in XL2010

View 6 Replies View Related

VBA And Charts In 2007...

Feb 17, 2010

I have a piece of code that arranges a chart to fit the data it should show. The code used to work perfectly in the old Excel version, but after an "upgrade" to Excel 2007 I get "Automation Error" from the line where the scale type is set.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved