Is it possible to build 1 chart that holds 2 different pie charts? If possible I need to do this with VBA. The pie charts will have the same "components" the only thing that would vary is the percentage of each component (some values will be zero in one of the charts).
View 2 RepliesI am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
I have a code for auto scaling charts, but I'm looking for a slight tweak to improve its performance. Here is the code:
Public Sub ChartScale()With ActiveChart.Axes(xlValue).MinimumScale = Range("J152").MaximumScale = Range("J153")End WithEnd Sub
(where J152 and J153 are the cells being used to scale the chart)
What happens is that I create a macro button, and then have to select a specific chart, then press the button to scale it. I have 2 main questions I'm trying to have answered to improve this process:
1) Is there a way to make this process automatic (i.e. no button press required)? The chart would autoscale automatically upon the min and max number changing.
2) And more importantly, can I specify the macro to an individual chart instead of the active one? For example, I'd like 4 charts on one sheet to all have their own auto scaling being performed. So, in the above code, the chart uses cells J152 and J153 for the scaling. I'd like the others to use other cells for the scaling. Cells J152 and J153 would auto scale chart "Name 1", cells K152 and K153 would autoscale Chart "Name 2", and so forth for 4 charts.
i am creating a macro to animate the charts, but i need a code where, if i select a block in the chart it should take the point name automatically.
View 1 Replies View RelatedI would like to use multiple scatter plots and bar charts in one chart. Problem is that X-Axis goes horribly wrong every time, even if I have same points on both scatter and bar. Here is Data for 2 Scatter Plots
XScatter1
1,43 0,14
2,60 0,25
3,04 0,37
3,60 0,50
3,93 0,60
4,69 0,80
X Scatter2
5,10 0,92
5,36 1,00
6,43 1,26
7,60 1,53
8,19 1,65
8,79 1,77
9,69 1,93
And here is data for 2 Bar Charts
XBar Chart1Bar Chart2
1,43#N/A 0,00
2,60#N/A 0,01
3,040,01 0,01
3,60#N/A 0,01
3,93#N/A 0,01
4,69#N/A 0,00
5,100,02 0,01
5,36#N/A 0,01
6,43#N/A 0,02
7,600,04 0,02
8,19#N/A 0,01
8,790,11 0,02
9,69#N/A 0,01
I start with Scatterplot and put those in the graph, then I add other data and change it to Bar Chart, but this is the point where X-Axis gets mixed up and scatter plot X data and Bar chart X data are not matching.
I have a sheet with about 50-60 charts and I am hoping to have a master list of chart titles on the side, how can I link these titles with the charts themselves?
View 1 Replies View RelatedI have created a line chart that plots weight of a person, but want to show on the plot area what a certain range of weight represent, Ive attached images to show this concept.
View 4 Replies View RelatedI have an excel which creates PPT from the excel. but the graph pasted in PPT are not aligned and formatted.
By aligned, i mean re-size the graph and paste in a formatted fashion (currently they are overlapping each other)
My entire PPT created is off alignment and formatting. E.g heading are not properly aligned (they are touching the line below) and so on.
Sheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.
View 3 Replies View RelatedMy DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
I am trying to put some charts into a report that is pivot table based. I have some code that will work if the pivot tables stay stagnic but the users may change the tables around so that could be an issue of new data. I have the following code where I changed the source to the pivot table name (general name because of numberous report possibilites). I have taken out the other charts because they are just a variation of the chart 1. I am crashing on the line with the * on it.
Sub UWTierChart()
Dim oCell As Range
Dim oChart As Chart
Set ws_data = ActiveSheet
'Chart 1
Sheets(wsPT).Select
Range("B21").Select
[code]....
How do I paste the first chart into the second chart but maintain the format of the second chart?
View 2 Replies View RelatedI need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
I know this has been discussed a number of times, but here is my problem
I have three charts in my workbook. I want to attach a macro so that when the chart is clicked it returns to Sheet - Home. I have using the following:
worksheets("Home").activate. But after I protect each chart and the workbook, and save and exit. When I reload the Workbook it has forgotten the assigned macros and nothing happens.
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedHow can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View RelatedI am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
I would like combine (overlay) a bubble chart with a connected point scatter chart. I understand that, without VBA, this is not possible. However, I understand that, by using VBA, the markers of a scatter chart can be configured as circles with their size proportional to values in a specified column. This pseudo-bubble chart can then easily be combined with a connected point scatter chart.
My question is: does anyone have any VBA code to share that shows how to configure a scatter chart as the type of pseudo-bubble chart described above.
I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies View RelatedIs there a way to display only the current month and the past 11 months in a Line Chart in Excel? So if I was to print Jan 2008 Excel graph, it would only display Feb 2007 - Jan 2008 data charting.
The spreadsheet of the data contains data for Jan 2005 - Jan 2008 so far, but only the current month with the past 11 months should display in the line chart depending on what is the current month.
My question is regarding changing properties in a chart without activating it. My current example is with adding data labels, but there are many other instances I could use this information in. Here is my current code:
VB: ActiveChart.SeriesCollection(2).ApplyDataLabels
However, I was hoping to replace it with something like this:
VB: Sheets("Dashboard").ChartObjects("Chart 1").SeriesCollection(2).ApplyDataLabels
I get the "Object doesn't support this property/method" error. Is there a way to do this? It just seems inefficient to have to activate the chart in order to make changes.
In the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies View Related I have created a pie chart showing top 10 best selling categories. However, on this pie chart, I want %age of overall sales to be shown.
At the moment say I put in the following
Catalogue 1 100
Catalogue 2 98
Catalogue 3 92
Catalogue 4 85
Catalogue 5 84
Catalogue 6 75
[Code]....
I add Data Labels and select the percentages. This shows at Cat 1 having 12.5% of the sales (100 of 800 sales), Cat 2 having 12.25%, and so on..... However, what you don't see is the following data:
Catalogue 11 60
Catalogue 12 58
Catalogue 13 57
Catalogue 14 57
Catalogue 15 56
So based on 1,088 sales, Cat 1 at 100 is actually only 9.19% of TOTAL sales.
I understand what is happening, the chart is giving the percentage based on the data inputted into the chart.
I did consider adding an 11th category to the chart, which was the total of Catalogues 11-15. Whilst this does give a more accurate percentage figure (as now all sales have been inputted), it makes the chart look ****
Is there a way of either adding the 11th category, and then "hiding" it, so that the chart doesn't display it, but uses it's value to calculate Catalogues 1-10s percentage?
BTW: The reason I ask is that I could be dealing with anywhere from 30 to over 100 catalogues. So it's not ideal showing the others in 1 chart.
I have a pareto chart(Bar & Cumulative Line Chart) that I would like to have the line orginate at x = 0 & y = 0 without changing the position of the other points on the line chart.
Basically this is for better visual appearance. When I add a 0 to the table, it skews the alignment of the line chart with the corresponding bar chart.
I would like to combine / overlay a bubble chart and scatter chart with straight connectors.
I understand that, without VBA, it is not possible to combine a bubble chart with a scatter chart.
Unfortunately, I am a VBA newbie, and so I cannot write my own code (though I can usually adapt code to my specific environment).
My question is: does anyone have VBA code to share that will convert a scatter chart series (x,y data in 2 columns) to a bubble-style chart (bubble radius in 3rd column)?
Attached is the sample data worksheet. Chart 1 is XY type chart using Seconds (2nd column of sample sheet as x-axis from 42510 to 42530). How do I change it to Line chart using Time (1st column of sample sheet as the X-axis) retaining same data from 42510 to 42530 on both primary and secondary axis?. And how do I again change it back to XY chart?
View 3 Replies View RelatedI have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
I'm looking for the excel model object chart and class diagram. I find the model object's description in the microsoft page, however i'm liked to have the object model and the class diagram in chart or picture.
View 5 Replies View Related