Pop-up Calendar When Cell Is Clicked
Jan 19, 2008Is it possible to modify the following codes so that if the active cell is formatted as Date when the cell is clicked the pop-up calendar shows.
View 11 Replies
ADVERTISEMENT
When Cell Clicked, Stays "clicked" Highlights All
Jan 10, 2007What in the world did I do now? When I click on any cell, the cursor turns into a thick "+" . Then, when I move my mouse up and down the spreadsheet, all the cells the "+" touches become highlighted.
View 9 Replies View RelatedPopulate Calendar If Date In Associated Cell Show Date On Calendar
Apr 4, 2013I currently have a worksheet that when a user clicks on the cell, a calendar form opens. From here they can select a date, click ok, and the date gets placed in the corresponding cell they clicked on.
Now if the user needs to change that date, i want them to be able to click on the cell again, and when the calendar opens, the date in the cell would be selected on the calendar. I was able to do this in a userform, but im not sure how to edit it to work on the worksheet. I am using the below to populate the calendar.
Code:
private sub worksheet_selectionchange(byval target as range)
if not intersect(target,range("aa16:aa24")) is nothing then .show calendar
When the user clicks the date, the below code places it in the cell.
Code:
private sub ok_click()
with active cell
.value=calendar1.value
end with
unload me
end sub
Now the below code was used when I was using a userform, but im not sure how to edit this to pull the date from the active cell.
Code:
privatesub userform_activate()
me.calendar1=date
if not tb is nothing then
if isdate(tb.value)then me.calendar1.value = tb.value
end if
end sub
Linking Cell To Row When Clicked?
Jul 16, 2014When I am in my workbook and I click on a cell in a worksheet I would like to be able to have the row highlight when I click a cell, instead of trying to manually find it which at times I get lost with all the data on these sheets. Now my workbook is completed and all my formulas are done. Just trying to fine tune my databases with being able to do the "click this cell and the row highlights where I need to be" If this is possible I would like to do this for all 3 databases.
View 14 Replies View RelatedInsert A Value Into The Cell When Clicked In Vba
Oct 2, 2009I need some VBA code which will insert a value into the cell when clicked.
First click = Value: 1
Second Click = Value: 2
Third Click = Value: "" (BLANK)
Cycle back to first click.
When A Cell Is Clicked The Row Also Highlights - But How
Feb 23, 2007I've seen a spreadsheet where the user can click on a cell, and the row the cell is in automatically highlights.
This is useful where there is a lot of columns, and it also looks pretty snazzy!
How do I do this? I know one way is to put the following code in when you right click the sheet tab and choose "view code":
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
UsedRange.EntireRow.Interior.ColorIndex = xlNone
ActiveCell.EntireRow.Interior.ColorIndex = 6
End Sub
But then I can't have nice background colours for other cells. Any suggestions?
btw, I've v. new to VBA - best to assume I know nothing!
Add Clicked Cell Value To Formula
Apr 26, 2007The idea is that once macro is started it will add the value of any clicked cell into the formula of the original cell.
ie.
1.start macro
2.click cell a5 (value=36)
3.type '+'
4.click cell b7 (value=21)
5.click enter to end macro
Result will be '=36+21' in the formula bar. The cell will then show the answer 57.
Copying Value To Another Cell When Checkbox Clicked
May 17, 2014I have 5 columns in excel and a value in each column, i.e. J23, L23, N23, P23, R23 (I have left columns blank in between each one).
The values in J23, L23, N23, P23, R23 are all different.
I'd like to place a Checkbox underneath each of these cells (each checkbox being specifically for the value in the cell above it) so that when I click one of the checkboxes, the value that is linked to that checkbox is then copied into another sell, for example Cell J31.
Cell Reference From Clicked Button
Jul 29, 2008There was a similar question I found answered in the archives. However the solution given there (using ActiveSheet.Buttons(Application.Caller).TopLeftCell.xxx) does not work in my case.
A little googling and I think the reason is that I added my buttons from the toolbar and not from the forms editor. My buttons are in the OLEObjects collection, not in Buttons.
So how do I determine which of my OLEObjects was clicked? Is there something similar to "Application.Caller"?
Change Cell Colour When Clicked
May 26, 2006I've found a great thread that answered part of my problem (Change colour of text on update of cell)
This code changes the colour of a cell when selected. With the application I'm trying to make I need this effect to only occur in a certain area say A10:D30
I'm trying to make a scheduling page that uses timebars to represent when people are working. I though if a user could click or highlight the hours and a time bar produced I could lookup to see what hour the timebar starts and ends and show the hours worked. I also need it to cycle through 5 different colours before returning to white.
Private Sub worksheet_change(ByVal target As Range)
target.Interior.ColorIndex = 4
End Sub
Change Active Cell After Hyperlink Clicked
Dec 27, 2009I have a column with entrys of 2 kinds. Some being Hyperlinks and others with normal type data. All cells are locked with password except for cells that will possibly have entrys made in them.
Is there a way to move the active cell to R1C1 after any hyperlink clicked? R1C1 is unlocked.
Override The Data In The Cell When Checkbox Is Clicked
Sep 3, 2009i am working on a spreadsheet that is doing two things 1) its allowing the user to choose between 1 to 3 number or N/A from the list validation option and 2) there is a checkbox if one selects that all the columns that have the formula will become N/A irrespect of data in it. I am using the following formula in the list validation option a3 is the check boc.
E5 =1
E6= 2
E7 = 3
E8=N/A
=if(a3=true, $E$8, $E$5:$E$8)
The issue I am having with this is, if I start selecting something from the drop down and half way I realize I need to check the box, it will only make it E8 value for the cells I have not touched and the ones I have already selected the drop down value it will remain. However I want it to override the value to E8 irrespect.
1) If the user of the spreadsheet clicks on the check box (this is in A3 cell) which i have linked it using format control then all the cell (Column E) that have the formula =if(A3=True, "N/A", ) will have N/A which is not applicable and not an error as you mentioned. I have successfully implemented this
2) If the user does not select the check box (a3) then each of the cell (Column E) has a drop down which the user can select either 1,2,3 or N/A. Which I have successfully implemented by using the data validations. Now the struggle I am having is as follows: I have attached the spreadsheet for your reference too.
Now if I select number 2 in cell E10, 2 in cell E11 and 3 in cell E 13 and you can see alll the other cell in column E are 0, because of the formula and the box in A3 is not checked in Tab 1. In Tab 2 I have checked the box everything turned N/A in column E except cells E10, E11 and E13 because I had previously selected 2,2,3 respectively. This is not what I want, what I want is when I check that box everything should turn to N/A basically an override function is what I want to created.
Blink Destination Cell When Clicked On Hyperlink?
Jul 31, 2008I have a sheet where it has got hyperlinks to many cells. When I click on the Hyperlink, the destination cell selected should start blinking.
View 9 Replies View RelatedRemembering / Passing Double Clicked Cell?
Jul 26, 2012how to remember or pass the place where the user doubleclicks. I am trying to make a form show up when a certain range is chosen. For now this range is static, but it will be dynamic in the future. Once the user double clicksa cell in this range, the form pops up.
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Application.Intersect(Target, Range("M4:AF23")) Is Nothing Then
Cancel = True
[Code]....
Log Number Of Times A Hyperlink Cell Is Clicked
Jan 29, 2008I have a spreadsheet with contact information in it. I am trying to figure out a way to count how many times I click a contacts email address, then tally it in a weekly log. The end result will be a page that totals how many emails I sent each week for the year based on the number of clicks I have made to the spreadsheet.
Ideally I would also like to log the number of times the phone number is clicked too, but I am unsure how to make the phone number a live cell.
Without Closing A Form How Can I Show Values Of Clicked Cell?
Aug 18, 2009I attached an excel that I created. But I have one problem with it.
View 4 Replies View RelatedAuto Hide / Unhide 3 Rows Under Cell Where Clicked
Mar 18, 2014I want to click on a cell and automatically hide the 3 rows underneath where I clicked. Then unhide them when clicked again.
I will assign the vba code to the specific cells of the sheet where I need it. But it will always hide/unhide the 3 rows underneath the click.
Use Private Sub Function To Store Clicked Cell As Variable For Use In Macro?
Apr 20, 2013I have a spreadsheet with near 300 tabs, each with a picture in the tab. The main tab has a list of all other tabs, the goal is to allow the user to click on a cell next to an entry, and have Excel flash the referenced tab to allow the user to see what the entry is referencing. I have written a simple macro that activates a desired tab, unhides it, displays a message box to pause the macro, rehides the tab, then returns the user to the main tab.
Rather than creating a macro for all 300 tabs and creating buttons I would love to use the Private Sub Worksheet_SelectionChange(ByBal Target As Range) or some variation thereof, to make my life much easier. The name of the tab is in cell A2, so I would want to have the user click on cell A1, activate the macro, then take A1 to A2 with something like A1 = A(x+1)->A2, then display the tab listed in A2. So rather than have 300 macros with Sheets("XYZ").Visible = True, I would love it to read Sheets(contents of referenced cell).Visible = True. with the contents of referenced cell coming from some manipulation of the cell I clicked on...
Hide Columns In Sheet Based On Value In Double Clicked Cell
Jun 4, 2014I have a workbook with two sheets, Project Overview and Projects Detailed. In Project Overview column K is different project numbers and what i need the code to do is when this number is pressed it has to go to Projects Detailed and search for this number in column AV and hide the lines that does not correspond with the number that has been double clicked.
In project overview you should only be able to press the numbers from row 9 and down and in Projects Detailed the numbers in column AV also starts in row 9. Some of the cells in column AV are empty and these should also be hidden.
Calendar Control 11: Selected On The Calendar Is Greater Than 12 The Date Is Entered Correctly Onto The Sheet
Jan 8, 2010I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
Excel 2007 Calendar Control - Select Date From Calendar In A Field
Dec 24, 2009Using Excel 2007 Calendar Control:
I want to select a date of choice from a calendar in a field within an Excel spreadsheet.
I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.
This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.
Developer
Insert
More Controls
Calendar Control 12.0
VBA Code For Data Validation Input Message By INDEX MATCH When Cell Clicked
May 30, 2014code that will be able to lookup a cell in Column J of Sheet1 by using a lookup value on Sheet2. The lookup value can be any cell in columns B, D, F, H, J, K, or N on Sheet2. The tricky part is, I want the result of this lookup (the result comes from Column H of Sheet1) to be placed as a data validation input message for the cell directly to the right of the lookup value when this cell is clicked.
For Example: Lookup Value is "416991" which lies in cell N8 on Sheet2. Look it up in Column J of Sheet1 and return the appropriate value "X" from Column H of Sheet1. "X" will then appear as an input message when cell O8 of Sheet2 is clicked.
Phil Johnson's Calendar - Pop Up Calendar Without ActiveX
Mar 7, 2009I am using a great pop up calendar without ActiveX made by a guy called Phil Johnson. When you click a specified cell the calendar appears. The only problem is that the calendar doesn't default to today's date when it opens.
I have the original file Calendar source code if anyone needs it.
Populating A Cell With A Calendar Month Based On The Previous Date In Another Cell.
Jan 9, 2010Trying to word this right. I have one cell with a date of 01/01/2010. I have other cells that I want to be equal to this cell plus 1 or more months.
For example A1=01/01/2010
I want A2 to = 02/01/2010 based on one calendar month entered into A1. So if A1 changes 03/01/2010, A2 will = 04/01/2010.
Calendar Pop Up On Specific Cell
Feb 11, 2009I have search through this forum and gotten all info necessary to set up a calender pop up except for one piece.
I am using excel 2003 with XP and would like to put got on a work sheet so if I select range K31:m37 my calendarfrm will show. I have seen code for it to work with a date formated field but I would prefer it work on a the range only.
Count Cell Value Across Calendar
Jan 22, 2012I need to count all the cells that have a value across the calendar.
Column G to AC FOR ALL column B THAT HAVE GCE and only for the start and finish date of of my input
So when i input a start and finish and i want to find how many cells have a value across column c to column ac for all GCE in column B
I tried -
=SUMPRODUCT((g1:ac1>=startdate)*(g1:ac1
Pop Up Calendar In Excel Cell?
Mar 30, 2013I want calendar in drop down and select date which we required.
View 1 Replies View RelatedPop-up Calendar On Cell Click
Aug 18, 2008Is there a way to make a cell that when you click it a calendar pops-up and you can click a date on that calendar to auto-fill in that cell?
View 9 Replies View RelatedShow Calendar When Cell Is Selected
Feb 24, 2009Modify my code to have the calendar appear when the cell is selected?
Right now, you have to double click before the calendar appears. Specifically, I would like the calander to appear only when cell "C1" is selected.
User Form With Calendar - Txt Box Not Cell
Aug 1, 2007I've been scouring the internet trying to find a solution to this one and I keep hitting a wall. I have a userform and I would like people to be able to click on a txtbox and a calendar pop up. they select a date, hit ok and it populates the txt box with that date. I have made the calendar form and I am able to get it to appear but how do I get it to put the date back into the txtbox? There are multiple date txtboxes on the sheet and I need to populate each one individually as you click on them. All of the methods I have found so far are about populating a field in excel
View 9 Replies View Related