VBA Code For Data Validation Input Message By INDEX MATCH When Cell Clicked
May 30, 2014
code that will be able to lookup a cell in Column J of Sheet1 by using a lookup value on Sheet2. The lookup value can be any cell in columns B, D, F, H, J, K, or N on Sheet2. The tricky part is, I want the result of this lookup (the result comes from Column H of Sheet1) to be placed as a data validation input message for the cell directly to the right of the lookup value when this cell is clicked.
For Example: Lookup Value is "416991" which lies in cell N8 on Sheet2. Look it up in Column J of Sheet1 and return the appropriate value "X" from Column H of Sheet1. "X" will then appear as an input message when cell O8 of Sheet2 is clicked.
View 1 Replies
ADVERTISEMENT
Mar 1, 2014
I have , within a workbook multiple worksheets which have multiple cells with a certain DATA VALIDATION MESSAGE. I am trying to write a macro to sum up all those cells which have a common DATA VALIDATION MESSAGE.
View 2 Replies
View Related
Sep 2, 2008
I currently have 6 cells that Have a Validation Criteria of a "List". I'm using the Input Message on the Data Validation box. I need to have this Input Message Pinned to a specific area on my worksheet. Each time that I exit and reopen the file the Input Message returns to the Area around the dropdown box. The input message is different for each of the 6 cells.
View 9 Replies
View Related
Sep 13, 2009
Cells A1 to A10 contain names of different cars, what i would like to do in VBA is when i select any individual cell to the right of these the name of the car appears as a message (as if i had gone DATA -> VALIDATION -> INPUT MESSAGE -> CARS NAME).
Tried positioning a Userform next to the active cell but when i scroll down the page and select a cell the userform is to far down the screen to be seen.
View 9 Replies
View Related
May 5, 2014
What would be the correct syntax for pulling information to the input message box from another sheet?
Code:
Sub test_data_validation()
'
' test_data_validation Macro
'
Dim nrows As Integer
Dim i As Integer
Sheets("sheet1").Activate
[Code] .........
View 2 Replies
View Related
Apr 21, 2009
I have multiple data validations with input messages. For the new user, this is handy, but for the person that does this a lot, they get in the way. When I open the sheet, I can move one message to the side of the page and the rest of them come up at the same spot but when I save, exit, and reopen, the message comes up beside the cell and I would like it to always stay to the side of the page.
View 9 Replies
View Related
Apr 30, 2009
I have a list of data that I'm using the index - match function to output data based on user input.
For example, I have:
1 10
2 15
3 20
So when '1' is selected another cell outputs '10'.
However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.
View 5 Replies
View Related
Apr 2, 2009
is it posible to control the positioning of the pop-up data validation input messsage box via vba? As often it obscures the view of critical cells below.
You can manually click and drag it to a desired position manually. Mana users are not aware of that. It would be desirable to reposition it elsewhere rogramatically.
View 2 Replies
View Related
Jan 9, 2008
I am using data validation input messages for data entry tips/definitions. The data entry cells are grouped in small tables (about 5 rows X 6 columns) so when the user clicks on a cell, the data validation input message box pops up next to the active cell. This covers the adjacent cells which need to be completed as well.
If I drag the message box over to right of the input table, the messages for the other cells stay in the new location as well. However, Excel doesn't remember this location the next time the workbook is opened.
Is there a way to set the location of the message box or some other way to achieve the same objective of having text boxes pop up in a defined location when a cell is activated?
View 9 Replies
View Related
Oct 13, 2008
Situation: I have an Excel file with multiple worksheets. Each of these worksheets contain the same rules for data validation in a certain column (G).
Problem: If I want to add an item to the data validation lists I have to edit every single worksheet. I've tried making a seperate worksheet containing data validation items and using that as the source for the data validation rule, but Excel doesn't allow me to switch worksheets while defining the source.
In other words, I want to manage my data validation rules of multiple columns in multiple worksheets in one central location.
View 4 Replies
View Related
Oct 8, 2009
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies
View Related
Mar 17, 2013
How do I translate this to a vba code?
=INDEX('Workers List'!D3:D13,MATCH('Workers List'!C4,'Workers List'!C3:C13,0),1)
what i have done is
test = Application.Index(Sheets("Workers List").Range("C3;C13"), Application.Match(1, Sheets("Workers List").Range("D3:D13"), 0), 1)
But i keep getting an error, may i know whats wrong with it?
View 5 Replies
View Related
May 26, 2008
I want to write the following function using VBA. =index(B2:D8, match(lookup_value, A2:A8, 0), match(lookup_value, B1:D1, 0))
View 8 Replies
View Related
Mar 6, 2009
I thought what I wanted would be simpler than I have found. What I am trying to achieve is for any user trying to enter anything other than a "Y" into a cell would get an error message. In a nutshell I have in column A colleague names and from there 7 columns representing the days of the week split by a "spacer" column. This goes on for seven 4 week periods followed by a column that calculates how many "Y"s and into a formula that gives a running percentage.
My problem is that as there are several people that input data, some put multiple "Y"s so making the formulas throw up erroneous figures. That is why I am after a simple solution to stop any entry other than a "Y". I am guessing this would be better done via macro code?
View 4 Replies
View Related
Feb 16, 2007
On my spreadsheet, I have a large number of statistical calculations based on user-entered data.
Some of these depend on the number of replicates the user enters, so I have cells such as =COUNT(A1:A20) in A21.
Obviously, some things go wrong if there is only one piece of data, so I would like to have a message box appear if, for instance, the count is < 3.
Data validation doesn't seem to work, as A21 is the result of a formula, not user-entered data.
View 7 Replies
View Related
Mar 24, 2009
This is probably far easier then I am making it but I need to take the information that is in a textbox created through the control toolbox and copy and paste that information into a cell on different tab in the workbook. I have tried the infamous google and haven't been able to find much. The excel books that I have don't really touch on the control toolbox functions.
View 2 Replies
View Related
Nov 6, 2006
I have an input msg for a cell (in the data validation box). Whenever the cell is selected, it pops up the message box right by the cell, is there any ways we can position the msg box at our discretion? I can drag it down while the cell is selected but even if I save the file and re open and then select the cell, the msg box pops up right by the cell and not the place where i had dragged it earlier.
View 3 Replies
View Related
Apr 17, 2007
When I use list validation with name (Data validation List. Inseret name difine) and then trying to write manualy a differnt value (not from the relevant list) I am not being warned like I get when I choose a list . And then even when I have a list or a Name If I copy a diffrent value I am not being warned.
View 9 Replies
View Related
Nov 5, 2008
I am trying to restrict a cell to only be able to input the letter "i" multiple times, almost like a tally sheet, in other words I want the cell to be restriced to one letter, but allow that letter to be entered multiple times.
View 4 Replies
View Related
Jun 21, 2014
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies
View Related
Oct 8, 2009
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
View 9 Replies
View Related
Jul 12, 2013
Can data validation be used to enter a text message if no numeric value is entered in the cell?
I want to force the cell to have to be populated with a number and if not show "--".
View 3 Replies
View Related
Jul 18, 2014
Excel spreadsheet, that contains several columns. Three of these columns contain text data that is selected by using a simple drop-down menu sourced from a list. If an attempt is made to enter text data not in the associated list an error message is displayed. Easy so far.
I need need to extend the text data validation across all three columns so that only specific combinations of the text in the three columns can be used which is reflected in a further list. These combinations will be counted elsewhere and so needed. Therefore, if i attempt to enter a combination of text columns that is not reflected in the list, this too will present an error message stating 'combination not valid', or words to this effect.
View 2 Replies
View Related
Oct 13, 2007
I have a spreadsheet which I have formatted with validation rules for each cell. I have protected the sheet so that only certain cells can have info entered.
I also have a second spreadsheet with a bunch of data. If I copy this data and Paste Special it into my specially formatted sheet (Values only), all of the data copies over regardless of my preset validation rules.
I would like error messages to pop up for every incorrect value though.
View 9 Replies
View Related
Jan 9, 2014
Essentially, I would like a user to be able to select a PUB from the Data Validation drop down in row 2 of the PUB RATES sheet so that the corresponding information in the DATA sheet autofills.
Currently, this works only for the first column under each PUB when selected and this fills across all 4 columns (rather than the respective information for each column filling).
Also, the Data Validation dropdown includes blanks which I would like to exclude.
I have used a Range Name for the Data Validation of each PUB so that these can be drawn from a separate sheet as I don't want all the DATA content on the same sheet as the PUB RATES content.
View 4 Replies
View Related
Jan 8, 2009
I have to input data into "ANYDATA" field. Since I need this input to be 100% accurate, I would like my operator to input it TWICE. E.g. 1st input - Obama 2nd input- Obama. Only if BOTH the entries match will the data move into ANYDATA field, else the field becomes blank once again, and the operator has to re-key twice again. In example above, if he had input 2nd time as Obame, then he will have to repeat the process. Can anyone pls help me create suitable formula/ field settings...Thx! Preferably, I would NOT like to create two dummy fields "ANYDATA1" and "ANYDATA2" with corresponding entry in "ANYDATA" if both match.
p.s. Need this to be done using MS-Excel only.
View 10 Replies
View Related
Feb 24, 2014
I have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
View 2 Replies
View Related
Dec 1, 2009
Is there a way to reference a cell value instead of using a static value for col_index_num? For example - Instead of telling it to look in the 5th column of Sheet2, I would like it to look in the column were the heading (row 2) in Sheet2 is equal to the value of O2 in Sheet1.
Here's another example -
Normal formula: VLOOKUP(a2,Sheet2,5,FALSE)
What I'd like: VLOOKUP(a2,Sheet2,column where row 2 equals the value in 'Sheet1'!O2, FALSE)
View 7 Replies
View Related
Jan 13, 2010
I'm trying to make the included spreadsheet as idiot proof as possible as a lot is a stake. I have most functionality working well; however, not I would like to add a little more data validation that does not exist in the normal cell validation rule set.
I need all the input cells to validate that the cell contains the word "BOX" upon entry, otherwise throw a warning. This is because the data entry will be done by barcode and there are a couple barcode labels on each box. The one I want will include the word "BOX" somewhere in the code sequence.
Since a previous function in the Code locks the cell, they wont be able to fix the error. but it will alert them so they can make sure to scan in the proper barcode and not miss the box. Also, once I get something that works in the code, where would I put it? In the same code box as the previous script, underneath it, or somewhere else? So, bottom line, I need a script that check the cell for Text of "Box" otherwise throw a message box.
View 2 Replies
View Related
Dec 1, 2011
I just have a basic data validation list. I used "List" and checked the right boxes and the file has been working before. Now the same file does not stop the user from typing in anything.
I re-did the same data validation in a new file and it works. Was there something in the file that prevents it from working?
I have Excel 2007. I saved in both xlsx and xlsm formats
View 5 Replies
View Related
