Possible To Change The Index Numbers Within A Collection
Feb 1, 2010
I have created a userform that upon clicking a commandbutton adds a line of 4 textboxes. Everytime the user clicks the commandbutton a new line of textboxes is created. The 4 textboxes in each line are described by a class (hope I am using the terminology correctly). And each instance is saved in a collection. The problem is that I am giving the user the ability to insert a new row in between two existing rows.
When this happens, I need all of the index numbers to re-order so that they are consecutive from the top of the form to the bottom. Example: The user enters 6 rows of data and then realizes that they missed an item that needs to be inserted between rows 3 and 4. Currently the rows are indexed 1 to 6 with 1 being the row at the very top of the form and 6 being the row at the very bottom of the form. If I insert a row in between 3 and 4 I will end up with the index numbers going from top of the form to bottom (1,2,3,7,4,5,6). Is it possible to reorder the index numbers so that the inserted rows index number will be 4 and each row after that will go up by one?
View 9 Replies
ADVERTISEMENT
Apr 2, 2008
I have several collections of objects in a macro I have created. However I would now like to be able to shift the order of these objects around (ie increase or decrease its index by 1 each time, and shift the other objects around it). For example I have collection1 which contains three objects x,y, and z with indexes 1, 2, and 3 respectively. I now want to give y the index of 1, and so shift x up to 2 so the resultant order is y, x, z. Is there anyway I can do this whithout copying all objects to another collection and recopying back in the desired order?
View 4 Replies
View Related
Oct 23, 2009
1Does Excel process worksheets (tabs) in the left-to-right order in which the tabs appear visually? Or in the order of the worksheets' index numbers as they appear in the VBE Project Explorer window? 2Is there a way to renumber or reassign index numbers to specific worksheets?
View 4 Replies
View Related
Jul 25, 2012
How to get the index number of a seriescollection within the activechart user has selected .
I am able access the chart selected by the user by using the activechart function, but next i am trying to access the seriescollection selected by the user, in other words the activeseriescollection thing.
Is there any way to access the active seriescollection of an activechart or any other way to access the seriescollecion of a chart selected by a user.
I googled a lot but what i found that we have give the index no. i.e; activechart.seriescollection(1)......
View 2 Replies
View Related
Jul 29, 2014
I have the same report, one a monday snapshot, the other a daily comparison. I would like to index columns B, in both reports, to find the same part number and then reference the horizontal row and highlight increases in columns G thru AD. The comparison report looks identical but the column B numbers may not be in the same location. this is a report to show prosduction requirements and the increases throughout the week.
View 1 Replies
View Related
Aug 30, 2013
I have a graph with something like 40 series that are being plotted. For one, I create non-standard data labels using VBA. In that code, I refer to ChartObjects(1).Chart.SeriesCollection(34). At some point I deleted a series that preceded it in the "select data" list and the code crashed. Took a lot of digging to learn that SeriesCollection(34) had become SeriesCollection(33).
To avoid this in the future, is there a way to refer to the SeriesCollection by a unique name rather than a sequential number?
View 4 Replies
View Related
Mar 18, 2008
I have a bar graph with 2 series of data. Anyone knows how I can specify the order in which they appear? code looks similar to the following. The bar graph shows the second series before the first series. How do I reverse the order?
With cht
.ChartType = xlColumnClustered
' first data series
Set ser = .SeriesCollection.NewSeries
With ser
.Values = someValues
.XValues = someValues
End With
' second data series
Set ser = .SeriesCollection.NewSeries
With ser
.Values = someValues
.XValues = someValues
End With
View 2 Replies
View Related
Feb 27, 2014
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
View 7 Replies
View Related
Dec 5, 2008
This formula locates on sheet 1. Since i'm trying to reference this number 123456167 to the second sheet with the format that looks like 0123456167, I'm trying to change value so both would be the same but I'm keep getting the #N/A.
=INDEX(Sheet2!$B$2:$C$399,MATCH((VALUE(A2)),VALUE(sheet2!$B$2:$B$33),2))
View 2 Replies
View Related
Feb 1, 2007
I know ASAP has a feature to do this but I need the code in a bigger macro that I wrote.
EX: -1 needs to be 1
View 9 Replies
View Related
May 16, 2014
I am attaching an example of what I am trying to do.
sheet 1 is how the jobs are assigned - Each job is assigned based on the part type and the last 2 digits of the order number. For example, Jon works any order that needs wheels and the last 2 digits of the order number are between 00 and 49.
sheet 2 is current jobs - this sheet shows the current job by order number and part, the employee column (C) is empty and is where I would like the formula and result
sheet 3 is the result I am looking for - formula results are in yellow.
So what I am trying to do is make it so that as employees come and go and assignment of jobs change on sheet 1, sheet 2 will automatically update the employee name to match.
View 4 Replies
View Related
Jan 16, 2010
I have to do a vlookup in 12 sheets (named ranges)
I use the formula '=vlookup(a1;choose(1;range1;range2; etc);2;0)
In this case I have to change the 'choose index_num' every time to match.
Is it possible to do the lookup without changing the 'choose index_num'?
View 9 Replies
View Related
Oct 25, 2007
Is there a way to automatically change the column index number in the VLOOKUP formula when copying the formula to columns? For example, when I copy a VLOOKUP formula from column A to column B, the cell references will change, but the column index remains the same. I'd like the column index to be increased by 1.
View 2 Replies
View Related
Dec 16, 2013
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
View 4 Replies
View Related
Sep 25, 2009
I've 2 worksheets, Summary and Sales. I need to get the total sales figure from the "Sales" worksheet onto the Summary worksheet. Sales data are pasted onto the worksheet monthly. Tried using vlookup but problem is, the column containing the total sales figure may vary and I need to update the vlookup formula. Another problem is that sometimes the Total sales (the lookup value) is not in the first column. Tried using the Index and Match combo but cannot get it to work. I've attached a simple mock up to hopefully illustrate my case better. I believe the experts in this forum should find this rather easy!
View 14 Replies
View Related
Jan 28, 2014
As you can see from below I already have a spreadsheet which updates the fill colour of cells based on a certain criteria. This was initially set up in Excel 2003....I have now moved onto 2010 and want to use a certain colour based on it's RGB value. I tried as you can see from below, the part which is commented out (as it didn't work)
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim n As Long, lngIndex As Long
For n = 6 To 842
[Code].....
View 3 Replies
View Related
Mar 16, 2009
If a INDEX,MATCH function returns a zero, how do I get it to use the value in the adjacent cell which is a unique number?
=INDEX(Sheet2!A:C,MATCH(A2,Sheet2!A:A,0),3)
Example:
View 2 Replies
View Related
Nov 12, 2012
I have a document that is a subject index for book that has terms that reference page numbers. The structure is for example: Employment, 587, 592, 553, 605, 233 The term is always following by comma and then space and listing of page numbers that subject reference applies. In many cases the page number references are out of sequence and I need them to be in numerical sequence. i.e. Employment, 233, 553, 587, 592, 605 There are many subject terms in index and need to check and fix sequence of page references for each.
View 6 Replies
View Related
Sep 1, 2013
My data is set out in columns, where alternate columns provide day numbers for given years (we can call these type 1 columns), with adjacent columns containing values which correspond to those type 1 column day numbers (we can call these type 2 columns). There are about a hundred columns in total (50 of each type). I would like to get excel to return the three largest numbers within each type 2 column, but I want to exclude data within the type 2 column above the point which is adjacent to a specific (varying) day number in the type 1 column. The location of this point varies for all the type 1 columns, according to a third row of numbers (the look up start point), which are currently listed below the dataset in every type 1 column. So, for the type 1 column "year 1", I would want Excel to ignore the values 0 and 1, which are listed next to day numbers 78 and 79, and begin looking for the three largest values down the column starting from the value which is adjacent to 81 (which is a 2). In type 1 column "year 2", excel would start looking for the largest values from the cell adjacent to 78, so it would ignore the 18 at the top of the column,and would return 2 and 12. And so on.
Year1
Value
Year2
Value
Year3
[Code]...
look up startpoint
81
78
62
83
View 9 Replies
View Related
Jan 6, 2010
I trying to code a SeriesCollection in vba, below is the code I have:
' ActiveChart.Name = "Chart1"
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Name = "='Chart1'!$C$1"
ActiveChart.SeriesCollection(2).Name = "='Chart1'!$D$1"
ActiveChart.SeriesCollection(3).Name = "='Chart1'!$E$1"
ActiveChart.SeriesCollection(4).Name = "='Chart1'!$F$1"
ActiveChart.SeriesCollection(5).Name = "='Chart1'!$G$1"
ActiveChart.SeriesCollection(6).Name = "='Chart1'!$H$1"
ActiveChart.SeriesCollection(7).Name = "='Chart1'!$I$1"
ActiveChart.SeriesCollection(8).Name = "='Chart1'!$J$1"
ActiveChart.SeriesCollection(9).Name = "='Chart1'!$K$1"
ActiveChart.SeriesCollection(10).Name = "='Chart1'!$L$1"
ActiveChart.SeriesCollection(11).Name = "='Chart1'!$M$1"
ActiveChart.SeriesCollection(12).Name = "='Chart1'!$N$1"
However it it giving the error "Object denfined or Appication denfined"
View 9 Replies
View Related
Jun 20, 2006
I am using the following code to determine whether a given range is the linked cell for a Combo Box by looping through the shapes collection.
Function LocateFormControl(OverRange As Range) As Shape
Dim objTemp As Shape
For Each objTemp In OverRange.Parent.Shapes
If Left(objTemp.name, 6) = "Drop D" Then
If WorksheetFunction.Substitute(objTemp.ControlFormat.linkedcell, "$", "") = WorksheetFunction.Substitute(OverRange.Address, "$", "") Then
Set LocateFormControl = objTemp
Exit Function
End If
End If
Next
Set LocateFormControl = Nothing
End Function
However, when I use this code on big worksheets with many other shape objects (such as Comments), the program runs very slowly. Is there a ComboBoxes Collection that I could use to avoid looping through all shapes on the worksheet, or is there a different, faster way to run this code?
View 2 Replies
View Related
May 8, 2007
I have a multiple column spreadsheet (Call it- "Money") whereby I need the data identified based on a list of account numbers and return this data to a new sheet.
In "Money" I have:
IE; columns B, C respectively have cust #A100 & 20.00
columns E, F respectively have cust #B100 & 40.00
columns G,H respectively have cust #C100 & 60.00
Etc.
(above for illustration-there are 100 lines of data in these columns with varied account numbers and respective dollars)
So what I have now is a new sheet I have named "Control". I have listed all my account numbers like A100,B100 etc. in column A. These are the account numbers for ident purposes.
I need the data entered in "Money" identified by those columns B,E,G with respective amounts from C,F,H and based on the list I have in "Control" whereby in "Control" if A100 is listed in column A then the figure to be returned in column B is all the data bits found in all columns C,F,H from the entire sheet "Money". Tough to explain but ie below....
View 17 Replies
View Related
Dec 7, 2008
I have a piece of code I am using to important data from a text file. The code works fine but I am having a hard time understanding how defining a Variable "As New Collection" works. I have tried to research on numerous websites dedicated to excel but had no luck finding any further information.
I have executed the code line-by-line over-and-over and believe what the "new collection" does is it creates some type of external database that is hidden within excel (that's just my guess). I have attached a sample file and a text file with dummy data if needed to see how the code is working.
View 4 Replies
View Related
May 26, 2009
Is there a way to remove a value from a collection after I've added it.
I have simplified the code I'm using to highlight what I'm trying to do.
Basically I'm adding 10 keys to a collection and want to remove the last one. There is a reason for this.
View 3 Replies
View Related
Oct 5, 2006
Im workin with a spreadsheet.. At the end of this script you see how i am putting "a" in R11C33, well I want to put the contents of my workbook C3 instead. I just dont know how to do it. After it does that I need it to move on to cell C4 and put it also in r11c33...
View 4 Replies
View Related
Oct 27, 2006
I have a large table (20,000 plus entries) and I need a way to pull out data that matches criteria in buckets.
For example:
April data (column B) that is from 0 to 30 (column C)
April data (column B) that is from 31 to 45 (column C)
... 46 to 60
... 61 to 75
... 75 to infiniti
Then do it again for May, June, July, etc. I have used DCOUNTs to pull this type of data, but it's a bit cumbersome. Any other ways to pull this type of data from the table?
View 3 Replies
View Related
Jan 28, 2007
I am attempting to create a double-entry accounting system and am having trouble with my Transaction class (clsTransaction). As each transaction will consist of at least two entries, I have included a Collection in clsTransaction that will accept Entry objects (clsEntry) as items. The Add method appears to go ahead without a hitch, but when I output the values from the Entries I get the same values for all items in the collection. Here is the code I've been working on.
The Transaction Class
clsTransaction - (Class Module)
Option Explicit
Dim mcolEntries As Collection
Dim msDescription As String
Private Sub Class_Initialize()
Set mcolEntries = New Collection
End Sub
Public Sub Add(eItem As clsEntry)
mcolEntries.Add eItem
End Sub........................
View 3 Replies
View Related
May 2, 2007
I have a userform with three checkboxes on it. In the manuals I have read (and websites I am learning from) I have encountered articles that give me the impression that it is possible to create a collection of almost any object, and then quickly return properties about the collection as a whole. So, I am wondering, is it possible (or even appropriate) to group the checkboxes on this userform into a collection, and then, with a few lines of code, see if any of them are checked? If this is not possible, or efficient, is there another way to do it? I'll admit that three IF statements are not all that hard to enter, but I know the day is coming when I will make userforms with many more checkboxes in them.
View 4 Replies
View Related
May 31, 2007
I have a routine that creates a collection of textboxes to simplify adjusting their positions: ...
View 9 Replies
View Related
Feb 7, 2008
I hope this passes muster. Anyways, I wrote some VBA code to handle an embedded chart in my workbook. I named the chart "Data" but i'm getting some unexpected trouble from VBA. Last time I worked on this set of code, it ran fine. When I try to run it now, it is throwing up an error: "1004 Unable to set name property of series class" The .name function is not working correctly but everything up till that point is working correctly. I have 5 sets of data in this chart also ....
View 9 Replies
View Related
