I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
I am attaching an example of what I am trying to do.
sheet 1 is how the jobs are assigned - Each job is assigned based on the part type and the last 2 digits of the order number. For example, Jon works any order that needs wheels and the last 2 digits of the order number are between 00 and 49.
sheet 2 is current jobs - this sheet shows the current job by order number and part, the employee column (C) is empty and is where I would like the formula and result
sheet 3 is the result I am looking for - formula results are in yellow.
So what I am trying to do is make it so that as employees come and go and assignment of jobs change on sheet 1, sheet 2 will automatically update the employee name to match.
My data is set out in columns, where alternate columns provide day numbers for given years (we can call these type 1 columns), with adjacent columns containing values which correspond to those type 1 column day numbers (we can call these type 2 columns). There are about a hundred columns in total (50 of each type). I would like to get excel to return the three largest numbers within each type 2 column, but I want to exclude data within the type 2 column above the point which is adjacent to a specific (varying) day number in the type 1 column. The location of this point varies for all the type 1 columns, according to a third row of numbers (the look up start point), which are currently listed below the dataset in every type 1 column. So, for the type 1 column "year 1", I would want Excel to ignore the values 0 and 1, which are listed next to day numbers 78 and 79, and begin looking for the three largest values down the column starting from the value which is adjacent to 81 (which is a 2). In type 1 column "year 2", excel would start looking for the largest values from the cell adjacent to 78, so it would ignore the 18 at the top of the column,and would return 2 and 12. And so on.
Year1
Value
Year2
Value
Year3
[Code]...
look up startpoint
81
78
62
83
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
I am trying to tidy up a large workbook, and need some help with use of range names in the Match function.
I have the formula working on the attached sample, but wonder whether it's possible to get the Match function Lookup Array to pick itself from the range name.
I am struggling with a INDEX,MATCH and MAX formula. I am trying to retrieve values from column E with two criteria:
1. That the value in column C is equal to a lookup value
2. That the date in column A is the closest before date for a lookup date
I have attached an example file.
Is it possible to use Match to find a value within a Named range and then, based on that value, use Match and Index again to find a value two columns across?
I have a list of clients in Column A, with 10 cells between each. In Column B, I have a list of currencies (the same currencies next to each client) and in Column C the rate this client pays for this currency. I want to reference these rates from an external workbook. Is there any way to use Match to locate the client name, then use Index/Match to locate the rate for a particular currency, somehow telling Excel where to look the second time?
I would like to ask how can I get to work the index match function (if there's any formula other than this current function its fine) if i have a start date and end date as range date then another criteria for name to get my desired result. im having a hard time to explain so i attached a workbook so you can around it.
I found a formula and tweaked it but still cant get to work.
I am trying to monitor the status of a cell on another sheet and autopopulate a cell depending on that information. The formula works well until I give the spreadsheet to a 3rd party and the formula ranges change after they paste new data to the source sheet. I have tried locking and password the formula cells but they change range regardless!
Here is the formula from the first cell.
[Code] ......
It scans for a number in an adjacent cell. If the number is present on the sheet 'Test', it autopopulates the cell with a string from the source sheet. The cell remains blank until there is data present.
If I cut data from row 6 and paste it to row 17, the formula cahnges itself to:
[Code] ........
How I can lock down this formula so that the ranges remain the same i.e. $AT$6:$AT$26, despite changes on the source sheet? I have tried F4 to toggle relative and absolute references and this has made no difference.
Basically, I am trying to write a program that will index match through a range and if it doesn't find the value that it is matching to, it will add the value to the bottom of the range it is indexing against. In other words:
My C column has a list of CUSIPS. In column J, I would like for the User to be able to add a list of cusips and then have the ones that don't already exist in the list of CUSIPS in column C be added at the bottom of the range. I have written a macro now that uses the index match, but for some reason it adds all of the cusips that exist in J range to column C, not just the ones that are missing. I can provide a template if necessary.
Sub Filler()
Dim Row As Variant
Dim NumberOfRows As Long
Row = 0
[Code]...
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedWe know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
how to checking data in 2 column each row, if partial/altogether string is match, shown "ok" otherwise show "check" with data in column a as parameter..
View 3 Replies View RelatedI have been trying to write a script that when a workbook is opened it promts you if you want to archrive old data.
If the use selects yes the script will run and checks all dates in column AG8:AG60 on status worksheet if it matches that criteria(older than 30days from today, and it is underlined) then it copys and paste all the data in that row from "A" to " AI" to the next available row in the archive sheet in the same workbook.
This is what I have but since i dont quite understand VB that well i cant find where my mistake is.
Private Sub Workbook_Open()
Dim iReply As Integer
iReply = MsgBox(Prompt:="Do you wish to archive old Data now?", _
Buttons:=vbYesNo, Title:="Remove Old Data")
If iReply = vbYes Then
MsgBox "I will know run chkdates"
Run "ChkDates()"
ElseIf iReply = vbNo Then
Exit Sub
Else
Exit Sub
End If
End Sub ............................
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedI'm trying this formula but it does not work properly in cell S5:
=IF(ISNUMBER(SEARCH(MID(R5,1,1),K5:O5)*SEARCH(MID(R5,2,1),K5:O5)*SEARCH(MID(R5,3,1),K5:O5)),"win","lose")
I tried excel help and the great OZ but nothing exactly to my problem.
This is what I would like the formula to do.
Cell S5 would search the solutions cells( K5:O7 ) and compare them to either cell ( R5 for all 3 matching digits) or all combinations cells ( D5:I5 ) if a match is there then it would produce a "Win" if no match it would produce a " Lose "
I will need to be able to expand my range because my data will extend in the solution cells
I have attached a sample file for your review.
I have data like follwing strings.
WAY-308312-1
WAY-521340-1
233-6767-676-6
First two strings are correct. If I get number like in third string first part of string then we have to move row to some other sheet.
The first part of string should have text like WAY-123-13-1.
I used Val function it checking first charector only. It the string is like 2A1A-243-233-2 the it is not checking.
Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies View RelatedI couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View RelatedI am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):
{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}
I have the following macro:-
ActiveSheet.Select
ActiveSheet.Copy
Columns("A:D").EntireColumn.AutoFit
Range("A2:B500").Select
Selection.Sort Key1:=Range("B2:B500"), order1:=xlAscending, Key2:=Range("A6:A250"), order2:=xlAscending
Within this I would like to add a couple of features which check:-
1) If there is a number in column A - there should be one in column B
2) The numbers in column B are sequential i.e. 1, 2, 3 etc without any gaps in the sequence
I have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.
Teh StandHTML then gets used in the body of the email like other HTML items I use
The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.
Dim Myrange As Range
Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select
If Myrange = "x" Then
StandHTML = StandHTML & "Important Text"
End If
Example:......
On my worksheet 1, I have two dropdown boxes: B7 (that gives the building name) and B11 which gives the Type of Commission (Renewal, Expansion, New). B 20 is supposed to automatically select the percentage based upon what B7 and B11 select. E.g. B7 = House, B11 = Expansion then B20 should be 3.
This is my formula.
=HLOOKUP(B7,'Building Details'!$A$2:$R$24,MATCH(B11,'Building
Details'!$A$2:$R$2,0))
I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
View 2 Replies View RelatedAll it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg