Colouring Cell Based On RGB And Index Numbers
Jan 28, 2014
As you can see from below I already have a spreadsheet which updates the fill colour of cells based on a certain criteria. This was initially set up in Excel 2003....I have now moved onto 2010 and want to use a certain colour based on it's RGB value. I tried as you can see from below, the part which is commented out (as it didn't work)
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim n As Long, lngIndex As Long
For n = 6 To 842
[Code].....
View 3 Replies
ADVERTISEMENT
Jul 28, 2009
I've been trying to get a macro together which would colour all the tabs in my workbook based on whether or not a certain value exists in a certain cell. In this case the cell is C7 and the word there is "elective class:".
View 7 Replies
View Related
Feb 28, 2014
I am currently using a piece of code (within a bigger piece) that colours the dates in two columns based on how close it is to the current date. It works fine but sometimes the sheet it is looking in has over 3500 rows so it is taking for ever (well over 6 mins)
The code is
HTML Code:
Sub ColDate() 'date case opened
application.ScreenUpdating = False
Dim MyRg As Range
Dim F As Range
Dim DateDiff As Long
Set MyRg = Range("g1:h" & Range("H" & Rows.Count).End(xlUp).Row)
For Each F In MyRg
[code]...
View 1 Replies
View Related
Mar 12, 2014
I am trying to get a row of cells to highlight a percentage based on a date range
Below is an example of what my spreadsheet will look like, very simple for managers to read and understand but I am stuck on how i can get this to display the right way.
In the example i would need the Jan column to colour for a certain percent for 21 days and continue to feb for 26 days. Im not sure if this makes sense but this is what they are asking for. Colour bars to simple show the percent of days off each month.
Name Start Date End Date Jan Feb Mar
Dale 11/01/14 26/02/14 21 days 26 days
I have attached the spreadsheet for an example : Book1.xlsx
View 3 Replies
View Related
Aug 7, 2006
Is it possible to get the following to work.
If cell A2 has the number 5 in it (as a result of a calculation in that cell), is it possible to get the next five cells in that cell to colour themselves in?
Obviously, as and when the value in cell A2 changes, i need the number of cells coloured in to change as well.
In addition to this, the rows that this will happen in will vary week to week so i'm not sure if VBA is the way to do this.
Also would there be any problem with negative figures as when that happens i don't want any cells to colour in at all.
View 9 Replies
View Related
Oct 18, 2011
How do i have colouring to a reference cell what i mean is that on certain formula i get BUY or Sell on that cell. As per the conditional formatting i have made the colour change BLUE FOR "BUY" & RED FOR "SELL"
On second sheet i link the above TEXT., but the COLOUR OF THE TEXT Does not come.
Does CONDITIONAL Formatting come with reference cell.
View 7 Replies
View Related
Feb 17, 2010
I have a column for each month where the dates are entered on rows. Is it possible I can color a cell if the date entered in a cell for that month is 15 days past the end of the month. Like, if in a January column I enter a date on one of the rows as Feb.20, then the cell fills with red colour. I tried doing it using conditional formatting, but don't know how to say 15 days past end of the month?
View 5 Replies
View Related
May 8, 2007
I have a multiple column spreadsheet (Call it- "Money") whereby I need the data identified based on a list of account numbers and return this data to a new sheet.
In "Money" I have:
IE; columns B, C respectively have cust #A100 & 20.00
columns E, F respectively have cust #B100 & 40.00
columns G,H respectively have cust #C100 & 60.00
Etc.
(above for illustration-there are 100 lines of data in these columns with varied account numbers and respective dollars)
So what I have now is a new sheet I have named "Control". I have listed all my account numbers like A100,B100 etc. in column A. These are the account numbers for ident purposes.
I need the data entered in "Money" identified by those columns B,E,G with respective amounts from C,F,H and based on the list I have in "Control" whereby in "Control" if A100 is listed in column A then the figure to be returned in column B is all the data bits found in all columns C,F,H from the entire sheet "Money". Tough to explain but ie below....
View 17 Replies
View Related
Feb 27, 2014
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
View 7 Replies
View Related
Apr 24, 2012
I have a rather large table that I need to return the column heading from.
Within the table I have a list of Names in the left most Column (A) and a list of Percentiles in the header row (row 2) (incrementing by 5%). By inputting the name and a cell value I am trying to return the column header.
Using an example;
5% 10% 15%
Bob 3.5 4.1 4.15
John 3.6 4.2 4.30
Chris 3.3 4.9 4.95
Sammy 3.7 4.6 4.7
Like I said, knowing the name and the cell value, I want to return the percentage value. So for example, Bob would be one input value, and another input value would be 4.1. I would want excel to return 10%.
I have found different suggestions using a combination of index/match but even using these functions I cannot get it to return the COLUMN value instead of a cell value.
View 8 Replies
View Related
Jan 21, 2010
I'm trying to hone a quoting tool to generate an amount based on a given range and minimum charges for specified subsects of the range. If you reference the attachment I'm trying to calculate a charge in cell K15 based on values in B9 and C10 referencing the table I8:R9. What I cant figure out is how to create a minimum charge of 50 for J8:P9 (points A-G) and a charge of 95 for Q8:R9 (points H-I).
View 2 Replies
View Related
May 16, 2014
I am attaching an example of what I am trying to do.
sheet 1 is how the jobs are assigned - Each job is assigned based on the part type and the last 2 digits of the order number. For example, Jon works any order that needs wheels and the last 2 digits of the order number are between 00 and 49.
sheet 2 is current jobs - this sheet shows the current job by order number and part, the employee column (C) is empty and is where I would like the formula and result
sheet 3 is the result I am looking for - formula results are in yellow.
So what I am trying to do is make it so that as employees come and go and assignment of jobs change on sheet 1, sheet 2 will automatically update the employee name to match.
View 4 Replies
View Related
Jan 11, 2012
how would you do the following in excel 2007:
"SUM numbers within a cell based on unique strings in another cell".
For example, how would i use formula to SUM the following numbers (and only the numbers for david and sam only once), 700+454+50+40+2+129+16
700david
700 david
454john
50buch
40daniel
2sam
2sam
129mike
16steve
View 9 Replies
View Related
Jun 12, 2007
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies
View Related
Oct 10, 2008
I have a spreadsheet that contains data I import from various sources. Once the import is complete I need to colour various cells based on their contents. Normally I'd use conditional formatting, but there are more than 3 conditions so I need to use VBA (preferrably that i can turn into a macro and assign to a button to click once I've finished the imports each time)
eg: Everytime a cell content is the word "RED" , colour it red - then the same with various other colours.
Google has found me a change event piece of code but it doesnt work when you're cutting and pasting some info.
View 9 Replies
View Related
Oct 23, 2009
1Does Excel process worksheets (tabs) in the left-to-right order in which the tabs appear visually? Or in the order of the worksheets' index numbers as they appear in the VBE Project Explorer window? 2Is there a way to renumber or reassign index numbers to specific worksheets?
View 4 Replies
View Related
Feb 1, 2010
I have created a userform that upon clicking a commandbutton adds a line of 4 textboxes. Everytime the user clicks the commandbutton a new line of textboxes is created. The 4 textboxes in each line are described by a class (hope I am using the terminology correctly). And each instance is saved in a collection. The problem is that I am giving the user the ability to insert a new row in between two existing rows.
When this happens, I need all of the index numbers to re-order so that they are consecutive from the top of the form to the bottom. Example: The user enters 6 rows of data and then realizes that they missed an item that needs to be inserted between rows 3 and 4. Currently the rows are indexed 1 to 6 with 1 being the row at the very top of the form and 6 being the row at the very bottom of the form. If I insert a row in between 3 and 4 I will end up with the index numbers going from top of the form to bottom (1,2,3,7,4,5,6). Is it possible to reorder the index numbers so that the inserted rows index number will be 4 and each row after that will go up by one?
View 9 Replies
View Related
Nov 3, 2009
I have been finding answers on this website for soo long. But today is the day, I finally am stumped and could not find an answer here. I am setting up a standard excel sheet of data. Row 1 has labels and the data goes down each column.
the first column is 1 of only 5 words. the rest of the columns are number values.
Example.
city num1 num2 num3
cityname 3 4 5
cityname1 2 3 4
cityname 3 1 2
The data in the first column will be 1 of 5 city names.
My question is how can I setup a cell to keep a sum of num1, num2 and num3 of each of the 5 cities. I have been scratching my head and googleing for a couple hours now.
I was thinking of using an if then statement. Here is my psuedo statement for a cell that would be keeping track of num1:
(if any cell in column 'city' = cityname add the current value in this cell to the value located in column num1 of the row thats currently being evaluated.
The cell that contains this formula would have to constantly monitor the city column and update the num1 column as needed.
View 11 Replies
View Related
Mar 13, 2008
I am trying to do with data validation, trying to stay away from vba on this... and it is probably very simple:
Cell A1, they can select Rice, Cheese, or Rabbit
I want to use custom data validation on B1, so that if A1 = Rabbit, they can only enter 1. If it is blank or the other two choices, they can enter 1 through 10.
Can I do that with data validation? I can't get any if thens to work in it.
View 3 Replies
View Related
Dec 16, 2013
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
View 4 Replies
View Related
Sep 25, 2009
I've 2 worksheets, Summary and Sales. I need to get the total sales figure from the "Sales" worksheet onto the Summary worksheet. Sales data are pasted onto the worksheet monthly. Tried using vlookup but problem is, the column containing the total sales figure may vary and I need to update the vlookup formula. Another problem is that sometimes the Total sales (the lookup value) is not in the first column. Tried using the Index and Match combo but cannot get it to work. I've attached a simple mock up to hopefully illustrate my case better. I believe the experts in this forum should find this rather easy!
View 14 Replies
View Related
Dec 4, 2012
I have a rather large database that I'm trying to automate colours in, based on data that is inserted into Column 'D'. I've used the following code (with some success), but it colours columns that I don't want to colour:
VB:
Sub KeyCellsChanged()
Dim Cell As Object
For Each Cell In Range("D1:D5000")
[Code].....
That works fine - but the problem I have is that I only want to colour columns A:N, Q, T, V, AB:AE, etc. (random columns and not always together). I have already tried to replace parts (as follows), but get all sorts of errors (in particular Run-time error 1004):
VB:
If Cell = "Rabbit" Then
Cell.Range("A:N,Q, T, V, AB:AE").Interior.ColorIndex = 42
Is there someway that a line of code can determin which cells to colour in the row, or alternatively code that will colour the columns a specific colour and make them stay that colour when the first code above is used?
View 3 Replies
View Related
Jan 27, 2009
Just trying to work out the best way to be able to determine autoshape colours using cell values. For example I have 12 shapes that need to coloured either Red, Green or Orange depending on a specific cells value, 1 for Red, 2 for Green and 3 for Orange.
I have sort of managed to successfully complete this for 1 of the shapes, by using the RGB Fill option (Using 3 = Red, 4 = Green and 45 = Orange). But cannot for the life of me work out how to do this for multiple shapes using different cell triggers. Below is the code that I currently have and the spreadsheet that is linked to:
View 5 Replies
View Related
Dec 22, 2006
how I might be able to colour certain cells in a row a specific colour when a specific value is input.
For instance:
The value "A" is put into row A1. A1 and C1 cell colours change to green
The value "B" is put into row A2. A2 and C2 cell colours change to orange
etc. (not sure how many colours yet)
I sort of have a script set up, but there are certain things I dont know how to do. Like target the specific cells that need colouring.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 0 Then Exit Sub
Select Case Target.Value
Case "A"
Target.Interior.ColorIndex = 1
Case "B"
Target.Interior.ColorIndex = 2
Case "C"
Target.Interior.ColorIndex = 3
Case Else
Target.Interior.ColorIndex = 0
End Select
End Sub
View 9 Replies
View Related
Aug 2, 2006
I have a gone through quite a few topics in this forum.....but couldnt find answer to my question....may be because its too basic. I have a worksheet with 10 columns. I am trying fill colour in the rows that have "text" in column J (in other words.....their column J is not blank). I figured out how to fill the colour in the cells in column J when they are empty, but cant figure out how to colour the entire row from A:J.
View 4 Replies
View Related
Mar 28, 2007
I'm trying to automatically shade a number of cells dependant on the value in a single cell. ie. If D2="quote" then I want A2:Q2 to be yellow. If D2="Design" then I want A2:Q2 to be green etc etc. I have about 6 options in all of what D2 could be.
I then want to repeat this for about 200 rows.
View 7 Replies
View Related
Aug 2, 2008
I currently have some code which reads a stock file, adding up the stock for each individual item (which may be in one or more locations in the warehouse) and then placing the total stock count in a cell with the detail (of how much stock is in each location, the location and the expiry date) and a separate line for each location, in a comment.
The comment is constructed one line at a time as the code finds the stock records, see code below:
With shtWorking.Range(strStartColumn & intRow + 2)
oldComment = .Comment.Text
.Comment.Delete
.AddComment oldComment & vbNewLine & strComment
.Comment.Shape.TextFrame.AutoSize = True
End With
All this works very nicely, but I want to colour individual lines depending on the expiry date. This can be done manually in Excel, but I cannot find a way of colouring individual lines of text in a comment using VBA.
So, does anyone know of a way I can colour individual lines of text in a comment, using VBA?
View 9 Replies
View Related
Jul 23, 2006
auto colouring cells containing formulas
View 2 Replies
View Related
Apr 17, 2009
Would anyone have a script for something like this?
I'm looking at range c5:c1200
Starting at C5
If the first 2 digits in that number start with 01 then I want the formula to be in G5 = F5*12
if the first 2 digits are 03 then I want G5 = F5*24
I have several of these if statement to put in However I need it to check the entire range as well because the formula may be different in each cell (G)?
View 14 Replies
View Related
Oct 5, 2011
Set cell fill color based on number of adjacent cell
I am doing a research with the following information. In column B, I have the name of the buyer company, column B cells that contain numbers 1, 2 or 3 opposite the company name in column B depending on certain characteristics. I would like to mark the companies in column A in different colors (or some other recognizable way) as described below.
columns result
col A col B col C
7 Materials Inc 3
7 Materials Inc 2
6 Rayon Inc 3
6 Rayon Inc 3
6 Rayon Inc 3
8 Commun Corp 1
8 Commun Corp 2
8 Commun Corp 3
8 Commun Corp 2
8 Commun Corp 1
I would like to have on output in column A as shown above according to the following criteria:
4: if there are only 1 in column C opposite the specific company in column B
5: if there are only 2 in column C opposite the specific company in column B
6: if there are only 3 in column C opposite the specific company in column B
7: if there are 1, 2 and 3 in column C opposite the specific company in column B
8: if there are 1 and 2 in column C opposite the specific company in column B
Any suitable function in excel or Macros that can work with the formatting, because I have tens of thousands of companies and it will take too much time to do it manually.
View 1 Replies
View Related
