I'm debugging a file that keeps crashing. Every time it crashes I have to reenter about 6 different watches in my VBE Watch Window. Is there any way to have my Workbook_Open() create the watches?
View 14 RepliesI have a collection with several thousand items. I added the collection to the Watch Window in the VBE editor, but the Watch Window only displays the first 256 items in the collection. Is it possible to view all items of a collection in the Watch Window?
View 3 Replies View RelatedCan we use excel as a stop watch, with pause and continue menu? We are going to have a mini basketball tournament and I was assigned to be a timer. I want to impress my friend by using excel as a timer.
View 10 Replies View RelatedI'm trying to write a macro that will watch to see if there is change in a range of cells, and if the values of the cells change to preform a given action. I need to do it this way because I can't put a formula in some cells.
View 8 Replies View RelatedI have seen many threads about the stop watch but have problem to figure out which one will be best for me. I would like to create the stopwatch in excel where I can time single athlete (unlimited number) and check their splits/laps as well to get their total time. I would like to be able to take as many splits I want it. I need this to work in seconds.
AthleteSplit 1Split 2Split 3 Split 4Split 7Split 8Split 9TotalMichalGreg
I'm in the process of writing/editing a macro, but after I run the macro once, the Expressions in the Locals Watch window disappear, and if I try to run it again it produces an "Excel has encountered an error and needs to close". The macro probably doesn't make much sense out-of-context, but perhaps there's a glaring error that's causing this. A guess - possibly related to the Error Handling in the vba? (1st time I've used this in a macro).
Option Explicit
Sub Compare()
Dim strNaspK As String
Dim strCtryK As String
Dim intCtryRev As Integer
Do Until ActiveCell. Offset(1, 0) = ""
ActiveCell.Offset(1, 0).Select
strNaspK = ActiveCell
strCtryK = ActiveCell.Offset(0, 2)
On Error Goto ErrJump:........................
Basically, I've got two sets of data on different sheets, with NASP ID and country being variables. Just trying to import the data from the 'Comparison' sheet, if both the NASP id and country matches that on the first sheet, established by the variables.
I have a series of files, all named sequentially by date, for example...
Sales Report - Week of 2009-07-27 - NH.xlsm
Sales Report - Week of 2009-08-03 - NH.xlsm
Sales Report - Week of 2009-08-10 - NH.xlsm
...and so on. (The dates are always Mondays.)
I want to get the contents of a particular range on the previous file (e.g. the "RaceResults" range a.k.a. B4:B33 on "Sales Report - Week of 2009-08-10 - NH.xlsm")
Is it possible to change the value of an Excel checkbox (from Forms or Control Toolbox) under program control (i.e. using VBA)?
I'm trying to toggle a group of checkboxes on a worksheet from FALSE to TRUE (or back again) using a single button. The checkboxes all have to remain individually selectable by the user even after 'toggling'.
I am trying to distribute an app that uses MSCAL Control. I am including the MSCAL.ocx file in the setup file and it saves it to a dierectory. However, when the app runs it will not load the activex Control (MSCAL)
Application.VBE.ActiveVBProject.References.AddFromFile("c:Program FileBM ApplicationMSCAL.OCX")
I use comments to supply various detail information on the value in the cell. This might take 10-12 lines of comments, but only the first five appear when you hover over the cell. In order to see the entire comment you have to right click and edit then manually resize.
Any tips on how to resize at the time the comment is loaded so no manual intervention is required?
Is it possible to determine the Version of Office / Outlook that is installed on a machine, an based on that, add a reference to the correct Microsoft Outlook com object library programatically?
View 10 Replies View RelatedI've got a series of macros in place which, essentially, download several CSV files into a temp directory, then opens each and copies the data into a single workbook (one sheet).
What happens is that the some number of the sheets don't actually open until the macro stops. I've tried using the wait (Application.Wait Now + TimeValue("00:00:10")) and sleep functions, but it's not quite doing what I want.
What I'd LIKE to do is have the macro actually STOP processing for 10 seconds, then proceed (or start a new macro).
I've also tried putting the wait behind a button in a userform, which is non modal... the csv files open until the user clicks the button.
I have several buttons I and a chart I want to make invisible and visible
programatically. The buttons have names like Button65, etc. I did not
give them these names. Curiously, these buttons don't have properties when
I right click on them in design mode as do other objects. Why not?
Further, they act more like rectangles drawn from autoshapes in that I can
assign a macro to them, but unlike a rectange they are not named as
rectangles (e.g. rectangle 284). Why not? These are hybrid creatures!!
I like to use rectangles as command buttons, but then they do not have
properties which allow them to be made invisible, etc...
The chart name is Chart 1. Same problem, it has no properties. How can I
make it invisible?
When I have a macro open another file, it always activates the macros in it. Is there some way to disable the macros?
View 11 Replies View RelatedI'm adding a command button at run time using excels help code;
Worksheets(newWorksheetName). OLEObjects.Add ClassType:="Forms.CommandButton.1", Link:=False, DisplayAsIcon:=False, Left:=325, Top:=24, Width:=50, Height:=20
I want to change the buttons properties including its caption etc.. I've tried using'
Worksheet(newWorksheetName).OLEObjects("CommandButton1").Caption = "Do"
But i get a run time error. Also, the add method doesn't specify what the button is called, any clues?
I have a certain macro which copies data from one file to the other. There are several target files (refering to a given month each) and one source file. The user chooses a month from a drop down list in the source file which modifies a certain cell. The value of this cell decides on which of the 12 target files will be opened to paste the data to. The macro also copies the value of a cell which refers to the current date (=TODAY()) This number is then compared with a the range (value between two pints in time: start and end date of a given month). All I need is some sort of a pop-up window with a header i.e. WARNING. and the window text: You are about to send the information to a file which does not refere to the current month, are you sure you want to perform this action" and two buttons YES and NO in case the value of the current date does not match the range set up by the starting and ending of a given month in the target file. The button YES would then do waht ever the code that was placed before the pop-up window said, save the aplication and close it, and the NO button would simply close the aplicatiown without saving it. Something like that:
Sub Export()
'the whole code describing the action to be taken
If Range("A1").Value >= Range("A3").Value And Range("A1").Value <= Range("A2").Value Then
'here the A1 cell refers to the current date and cells A2 and A3 to the start and the end date of the month
End Sub
i have a macro that performs the same search in many websites, opening a new ie window for any site. What i want now is opening a new tab in IE instead of a new window. To illustrate, here go some code:
VB:
Dim PartNo As String 'Declaro la cadena de texto que determina la busqueda
Public Sub BuscarPLCCenter()
Dim IE As InternetExplorer
[Code]....
I would like that all of these procedures opened a new IE tab to do the search, cause actually it opens like 15 windows at a time and is not user friendly enough.
I am using Excel 2003 and wish to make a tip message (pop-up like window perhaps) if a value of a particular cell is exceeded.
View 2 Replies View RelatedIs there any way to have a macro, that is started from the immediate window, close the immediate window when it's done. My macro closes the immediate window, but as soon as it ends, the immediate window reopens and my cursor is inside it.
View 14 Replies View RelatedThere is a column with a formula and a list validation, and an adjacent hidden column with numbered ids. When moving into the list validation cell the Worksheet_Selection_Change event code saves information about the Target cell - value, address, formula. When a value has been obtained from the list the Worksheet_Change event code looks up a belonging id in a lookup table and put this in the hidden id cell, and puts the saved formula back into the list validation cell. This makes the sheet (or window) unmanagable.
When I move around the sheet I can see the cell name in the Name Box, but the sheet itself is not visible. The only way to display the sheet is to add a new window (Window - New Window), choose the first "frozen" window (Window - 1. window) and quit this window. Then the new window is ready for use, but of course with the same limitations as the newly quitted one. Ring a bell, someone?? The funny thing is that in this workbook I also use the same functionality in another sheet without any problems.
I'm looking for a way to use VBA to set the window size upon opening the workbook. When the document opens, there should be two windows, each taking up half the screen and each on a particular tab.
Currently, if I save the workbook with the window settings I want, when I open it, both windows are maximized. When I hit the restore button, they go back the settings with which they were saved, which is what I want it to look like as soon as it's opened. Also, a bonus would be for the code to determine the screen size, so it can fill the screen no matter what monitor/computer it's opened on.
I have 3 worksheets in a workbook. How can I have the view go to A2 and View that on each worksheet? I do a Range("A2").Select But, it still shows the window on another column - row.
View 2 Replies View Relatedi was recently upgraded to Excel 2003 and have found that whenever i open more than one workbook, it opens in a new window on the taskbar (similar to opening another application)... I remember having this in my previous version of excel but i can't for the life of me remember how i switched this off?
View 9 Replies View RelatedI open up Excel by double clicking on a file, it opens but it just has a grey background and the file I opened is displayed as a small 1 inch stip in the top left - just a title bar with the windows maximise, minimise and close buttons.
What ever I click I can't see any of the cells!
I've built a macro to run a loop that opens excel files, prints certain sheets and closes them. I have the macro working - to some degree. here is my code (this is excel):
Sub RMPProducer()
OldPath = "S:RMBS_Performance_Analytics Analysis1 Staging Folder For Monthly Model Templates2007200704VVDeals"
Dim t As Workbook
Dim s As String
Dim a As Window
With Application.FileSearch
.NewSearch
.LookIn = OldPath
.SearchSubFolders = False
.Filename = "*.xls"
.MatchTextExactly = True
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
s = .FoundFiles(i)
I have 2 problems. First problem is that I am trying to add a function to make the window close once its finished printing. This actually works - but it limits my loop iterations from i = 1 to 2 (so it only runs 2 times and I'm not exactly sure why). If I don't include the statement - this can run for up to 7 - 8 times (these are very large files) then excel runs out of memory. Unfortunately, i can't set the loop to run from i = anything other than one.
So What I would prefer is to be able to make the "ActiveWindow.close" command work - because this way I can run the entire loop. But I'm not sure how to. I tried window referencing, I tried adding a new active Window so when the file opens, its opening in the active window already, but nothing works.
Preferably, I need to be able to reference both windows, as my next macro will involve referencing 2 windows (one static - always open) and the other the loop above.
Heres a strange thing, My latest version of a spreadsheet i have design has got a small problem. When clicking on a cell, nothing appears in the edit window, and when you double click on the cell to edit the contents the data disappears.
This only happens on one sheet within a workbook of 7 pages. The werid thing is that it does not happen on the version before
Any ideas how this could of happened and is there a fix?
Is it possible to create a popup window that contains drawing objects?
I created a "form" with the objects, but I don't know how to use the form.
I want to have this image, or form, or whatever it is, to popup when the user clicks a cell. Is this possible without getting into programming?
Can it be hidden and then made visible when the cell is selected?
I have a workbook open. When I try to open a separate workbook, it opens already opened workbook (basically linking the workbooks as one). I want to have my workbooks on two separate screens this is preventing that. How to unlink these workbooks.
View 1 Replies View RelatedI'm trying to find an ID from a new open Internet Explorer Window.
I know that the ID that I'm trying to search for is "rBeginMonth_BeginDate", but my code always says that it's empty.
The code below is partially of what I've done.
[Code] .....
I have a project were i have to make a macro and place in a workbook such that as soon as i open that excel file
1. excel workbook is opened in New Excel window
2. Ribbon is hidden for this new window.
So when user closes this excel window there is no problem with other workbook ribbon, as there are open in different window
I have tried with code stated below it hides the ribbon but new excel window is not open
Private sub Workbook_open()
Application.ExecuteExcel4Macro "Show.toolbar(""Ribbon"",False)"
End Sub