Changing The Value Of A Checkbox Programatically

May 26, 2007

Is it possible to change the value of an Excel checkbox (from Forms or Control Toolbox) under program control (i.e. using VBA)?

I'm trying to toggle a group of checkboxes on a worksheet from FALSE to TRUE (or back again) using a single button. The checkboxes all have to remain individually selectable by the user even after 'toggling'.

View 9 Replies


ADVERTISEMENT

Changing Checkbox Value Without Re-running Macro

Apr 5, 2007

I'm trying to do what I thoughts was the simpliest thing, but for some reason can not manage.

I try to change to value of a checkbox, by a code, without re-running the CheckBox_Click () Macro. I have put a checkbox in a worksheet, and when tickmarking it, a msgbox will pop up (one msgbox for tickmark on), and you can press Yes or No. Pressing No, I will sett the Checkbox.value = False. The problem is, when I use this command, the checkbox_click macro will run all over again. Now, the checkbox is False, and antother msgbox will pop up (another msgbox for tickmark off). The results is then that I first get the msgbox I want, but it is followed by the msgbox for tickmark off, which should only pop up when the checkbox is ticked off manually.

Code is something like follows:

Private Sub CheckBox1_Click()
Dim mySheet As Worksheet

Set mySheet = ActiveSheet

Application. ScreenUpdating = False

View 3 Replies View Related

Generate File Name Programatically

Aug 18, 2009

I have a series of files, all named sequentially by date, for example...

Sales Report - Week of 2009-07-27 - NH.xlsm
Sales Report - Week of 2009-08-03 - NH.xlsm
Sales Report - Week of 2009-08-10 - NH.xlsm

...and so on. (The dates are always Mondays.)

I want to get the contents of a particular range on the previous file (e.g. the "RaceResults" range a.k.a. B4:B33 on "Sales Report - Week of 2009-08-10 - NH.xlsm")

View 2 Replies View Related

Loading MSCAL Programatically

Nov 5, 2008

I am trying to distribute an app that uses MSCAL Control. I am including the MSCAL.ocx file in the setup file and it saves it to a dierectory. However, when the app runs it will not load the activex Control (MSCAL)

Application.VBE.ActiveVBProject.References.AddFromFile("c:Program FileBM ApplicationMSCAL.OCX")

View 9 Replies View Related

Programatically Resize A Comment Box

Sep 19, 2006

I use comments to supply various detail information on the value in the cell. This might take 10-12 lines of comments, but only the first five appear when you hover over the cell. In order to see the entire comment you have to right click and edit then manually resize.

Any tips on how to resize at the time the comment is loaded so no manual intervention is required?

View 4 Replies View Related

Add Reference Programatically Based On Office Ver

Jun 12, 2008

Is it possible to determine the Version of Office / Outlook that is installed on a machine, an based on that, add a reference to the correct Microsoft Outlook com object library programatically?

View 10 Replies View Related

Programatically Add Watches To The VBE Watch Window

Jan 18, 2010

I'm debugging a file that keeps crashing. Every time it crashes I have to reenter about 6 different watches in my VBE Watch Window. Is there any way to have my Workbook_Open() create the watches?

View 14 Replies View Related

Stop And Restart Macro(s) Programatically

Jan 20, 2010

I've got a series of macros in place which, essentially, download several CSV files into a temp directory, then opens each and copies the data into a single workbook (one sheet).

What happens is that the some number of the sheets don't actually open until the macro stops. I've tried using the wait (Application.Wait Now + TimeValue("00:00:10")) and sleep functions, but it's not quite doing what I want.

What I'd LIKE to do is have the macro actually STOP processing for 10 seconds, then proceed (or start a new macro).

I've also tried putting the wait behind a button in a userform, which is non modal... the csv files open until the user clicks the button.

View 9 Replies View Related

Chart Invisible And Visible Programatically

Jul 30, 2006

I have several buttons I and a chart I want to make invisible and visible
programatically. The buttons have names like Button65, etc. I did not
give them these names. Curiously, these buttons don't have properties when
I right click on them in design mode as do other objects. Why not?
Further, they act more like rectangles drawn from autoshapes in that I can
assign a macro to them, but unlike a rectange they are not named as
rectangles (e.g. rectangle 284). Why not? These are hybrid creatures!!

I like to use rectangles as command buttons, but then they do not have
properties which allow them to be made invisible, etc...

The chart name is Chart 1. Same problem, it has no properties. How can I
make it invisible?

View 9 Replies View Related

Open A File Programatically And Disable Macros

Jun 28, 2009

When I have a macro open another file, it always activates the macros in it. Is there some way to disable the macros?

View 11 Replies View Related

Adding A Command Button And Then Editing Its Properties Programatically

Apr 25, 2007

I'm adding a command button at run time using excels help code;

Worksheets(newWorksheetName). OLEObjects.Add ClassType:="Forms.CommandButton.1", Link:=False, DisplayAsIcon:=False, Left:=325, Top:=24, Width:=50, Height:=20

I want to change the buttons properties including its caption etc.. I've tried using'

Worksheet(newWorksheetName).OLEObjects("CommandButton1").Caption = "Do"

But i get a run time error. Also, the add method doesn't specify what the button is called, any clues?

View 2 Replies View Related

Checkbox : Married, Widows, Single Checkbox Is Selected

Feb 25, 2009

married, widows, single checkbox is selected

macro solution
good work.

View 5 Replies View Related

Stop Checkbox Sub From Jumping To Other Checkbox Subs

Apr 16, 2014

I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.

If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.

I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.

How can I stop my subs from jumping from one to another?

Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False

[Code] .........

View 9 Replies View Related

Hide/Unhide Checkbox Using Another Checkbox

Dec 14, 2008

How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.

View 6 Replies View Related

Checkbox Vba: The Amount From The Subtotal Cell Will Auto Go To The Cell Next To The Checkbox

May 9, 2006

I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?

View 6 Replies View Related

Changing Cell Color Based On Changing Values

Sep 16, 2009

This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.

View 2 Replies View Related

Stop Procedure Window Changing When Changing Sheets

Sep 9, 2007

Moving between different sheets changes the procedure window, which is a good thing, but can also can be error prone and annoying to search through several windows searching for the procedure or module currently working on. Is there a setting somewhere to prevent VBE from changing the current procedure window?

View 4 Replies View Related

Allow Only One Checkbox To Be Used At A Time

Jul 6, 2013

On the attached Dynamic chart I have attached there are 3 checkboxes to display certain data. My issue is this, if I click the outside checkbox and the ISE checkbox at the same time that is OK, it gives me a comparison of the two data sets in a bar chart. Perfect. If I click just the total checkbox it gives me the total info of the outside and ISE, again perfect.

But, If I click all 3, it doubles all the numbers because total is total and outside + ISE also equals the total.

My Question,
-Is there a way to lock out a checkbox if another is active?
if 1 then no 2 or 3. if 2, 3 is OK but 1 is not. if 3 then 2 is ok but 1 is not?
-If it can't be locked can it do something like; If #1 has a check and you try to enter #2 a red error message could come up saying these two choices together the data will be inaccurate. I'm thinking this might be done in conditional formatting.

If option one is doable and easy, is it also possible to have an error message like in my second idea so people will know why they can't click that second box? This would be my preferred fix but I am open to any other option you may have to accomplish this.

View 4 Replies View Related

Turning On A Checkbox

Apr 13, 2008

I want to turn on (tick) a check box from within a macro.

View 9 Replies View Related

Checkbox Reference...

Mar 11, 2009

Checkbox reference. I am using the following code

View 4 Replies View Related

Select All Checkbox

Oct 28, 2009

I have 20 check/tick boxes on my worksheet (CheckBox1-20), each of the 20 tickboxs has its own linked cell A1-A20 - I wish to have another checkbox (checkbox21) that, when ticked will tick all of them.

Also, if unticked it will untick the 20. I'd like this to be a kind of "onclick" command - so that if I wanted to tick 5 of the 20 on their own, the "master" tick box won't interfere with this. If a command button is easier to code than this is just as good.

I've been looking online on on here for the last 2 hours with no joy, not even getting close.

I am using Form Controls rather than ActiveX controls.

View 6 Replies View Related

Check The Value Of A Checkbox In VBA

Jan 7, 2010

I'm trying to check the value of a checkbox that I created in my workbook, but both of the if statements below say "Object does not support this property or method"

View 6 Replies View Related

Checkbox In RibbonX

Jul 13, 2012

I have a RibbonX checkbox that I have added to my ribbon. I am able to attach code to the OnAction callback and when the user clicks the box, the code executes properly. Now for my issue. How can I change the checkbox from checked to unchecked and vice versa within VBA?

My situation is this:

I store a list of employees with certain elements such as start date, department, title, etc. in a table. One of the fields is Inactive which shows whether they are active or inactive. I may want to see all the employees, or just the active ones. My checkbox will allow the showing of both inactive and active employees. The user may wish to save the default setting for this and so I have created a table that holds a Boolean True or False for whether to show inactive employees or not by default. The checkbox always shows unchecked by default when the workbook loads, and I want to change the textbox's checked state based upon the value in the table.

View 1 Replies View Related

Checkbox Event

Dec 10, 2006

I need to have a check box, that when it is checked the user must fill in a cell.

View 9 Replies View Related

Set Checkbox In The Next File

Aug 25, 2009

Create a macros, which sets any checkbox in the next excel file
fist link
http://narod.ru/disk/12388811000/car_test.xls.html
or another link of the same file
http://rapidshare.com/files/271305333/car_test.xls
I can't find the name of any checkbox.

View 9 Replies View Related

Disable Checkbox In VBA

Oct 6, 2009

I have a sheet with a number of checkboxes, and I need to conditionally enable/disable some of them.

For example, if the user checks Box1, then the question for Box2 becomes relevant and Box2 becomes available. If Box1 is unchecked, Box2 needs to be unchecked and disabled.

View 9 Replies View Related

Use Of Checkbox On Userform

Nov 2, 2009

Can it be made in VBA as follows:

I have made a userform with the initialize routine. On this there are checkboxes which I would like to be selected for a YES.

When the YES (checkbox) is being selected I than would like to see in the active userform an already made and "hidden" textbox to enter a value for confirmation of a quantity to order.

I have been loking for some sort of Private Sub Userform Change() routine, but can not find this type of routines

View 9 Replies View Related

Checkbox At Chart

Dec 8, 2009

i want to create a chart ,the chart have a checkbox beside it.
so i can check which line to display....
example
test1 (group112data,group113data)
test2 (group112data,group113data)

then the chart selection is to select 1 then it will diplay group112 result (test 1 and test2),this is to make comparison

can i do it for normal chart?
or must use pivot chart?

View 9 Replies View Related

Refer To A Checkbox Value By Vba

May 10, 2007

I have a check box whithin a worksheet. This CheckBox doesn't have any linked cell, and doesn't have any macro asigned. know I would like to refer to the value of the checkbox by vba kind of: ?ActiveSheet.Shapes("CheckBox1").value=true 'from the vba's inmediate window

View 4 Replies View Related

Select All Checkbox In A Sheet

Dec 27, 2013

I have a sheet that have 100 checkbox. i want to select(not check) all checkbox for change their property.

How can I select all? (by macro or other way)

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved