Putting The "right" Command In A Macro

Feb 2, 2007

I am trying to add a formula to use the "Right" command in a macro, but I dont want it to remove any characters on certain cells. For instance i want to remove the seventh digit from the right only if it is a Zero. If it is any other number, i want it to skip that cell.

00234XX
021V54Q
1405RS1
5843TP1

So i would only want it to remove the zero from the top two and leave the last two as they are. The ammount of information changes on a daily basis so the formula would have to be able to distinguish the values of the first digit.

View 3 Replies


ADVERTISEMENT

Putting Input Into A Macro

Apr 24, 2007

I would like to write a macro that would start by asking me something along the lines of, "Enter student # you want to print a report about." The # I enter would need to be stored as a variable in the VB code, and then my code would need to use the variable to do some search and replace operations. (Replace all instances of 10 (the default student number) with the variable I have specified).

I don't really know how to even start going about this. How do I get Excel to ask me for a variable, and then use that variable in code?

View 9 Replies View Related

Macro Putting In The Formula As Text Instead Of Results

May 28, 2008

My macro contains a VLookup formula that is giving me the text of the formula instead of the results. A portion of the macro is, as follows:

Sheets("Survey Results").Select
Range("c1").Value = "Resolving Group"
Range("c2").Select
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-1],'Survey Invitation'!C[-2]:C[-1],2,FALSE)"
Range("C2").Select
Selection.AutoFill Destination:=Range("C2:C900"), Type:=xlFillDefault
Range("C2:C900").Select
Range("C2").Select

The VLookup statement appears in place of the result when the macro is run. This is Excel 2007 and it runs to the end without error.

View 9 Replies View Related

Macro For Putting Index Reference Numbers In Numerical Sequence?

Nov 12, 2012

I have a document that is a subject index for book that has terms that reference page numbers. The structure is for example: Employment, 587, 592, 553, 605, 233 The term is always following by comma and then space and listing of page numbers that subject reference applies. In many cases the page number references are out of sequence and I need them to be in numerical sequence. i.e. Employment, 233, 553, 587, 592, 605 There are many subject terms in index and need to check and fix sequence of page references for each.

View 6 Replies View Related

Run Macro From Command Button In Userform - Display Msgbox At The End Of Macro

Apr 17, 2014

I have a userform with a command button which fires a macro.

everything works fine so far.

my problem is:

I would like to add a msgbox at the end of the macro which confirmes "successfully completed".

I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.

(see below)

Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"

[Code].....

Unload Me

Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2

[Code]....

View 2 Replies View Related

How To Run A Command/macro At A Certain Time

Sep 7, 2009

I have an Excel worksheet with a DDE link that continually displays the latest data from a trading platform.

I want to create a second worksheet with a list of times in column A from midnight to 23:30 in 30 minute increments.

At each 30 minutes during the day I want to capture the latest data from worksheet A and store it beside the appropriate time in worksheet B.

But I don't know how to execute a command or macro at a time that is in a cell. My problem is getting the current time to match the cell value.

View 6 Replies View Related

Run A Macro From A Command Button

Dec 20, 2009

I have created a command button from the Excel 2003 from the Macros toolbar that I placed on my worksheet. I want to use this button to activate an existing macro. Currently I have no code entered for this button and the button when clicked on behaves as an object to be edited, moved, etc. How should I proceed?

View 6 Replies View Related

Macro: Using Command Buttons To Run Them

Jan 4, 2008

I can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.

I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.

This is what I recorded initially; this works from Tools>Macros

Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................

View 9 Replies View Related

Macro Calendar Command

Mar 27, 2009

What I want to do is be able to make a command on a range of cells. Every cell you would click would make a calendar box pop up. Then you select the date from the box and it enters the date into the cell. I found a easy way to go about doing this on a dropdown box but the boss didn't want that.

I have been trying to figure this out all morning.

View 9 Replies View Related

Command Button / Macro

Jul 5, 2006

I am trying to attach a recored macro to work via a command button - but keep getting the error message "select method of Range class failed.

When I run the macro through the normal way it works, but I want to be able to click on a Command button for it to work.

I have copied the recorded macro code to the command buttons code field

Do I need to use the code for the Cmd Btn to tell it to run the Macro -

View 3 Replies View Related

Find Command In Macro

May 19, 2007

I have the following lines in my macro:

Dim LastMonth As Variant
LastMonth = Year(Now()) & "0" & Month(Now() - 1)
Cells. Find(What:=LastMonth).Activate

I am trying to find the first instance of 2007+previous month, i.e. April =04, in a data set. Not sure how to tweak this formula to make it work.

View 7 Replies View Related

Press Command But And Execute The Code Assigned To Another Command Button

Apr 14, 2009

Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).

View 9 Replies View Related

Separating Macro Command Lines

Nov 4, 2008

I have a problem with multiple, similar formulas in a macro. Each of these formulas, depending on the active cell, selects a certain range of cells and prints it.

The problem is, no matter which active cell I'm on, the macro activates all lines of the formula and separately prints each range. Is there a way to "separate" these lines in the formula so each range will print separately, depending on the active cell?

Here's the

View 8 Replies View Related

Assigning Macro To Command Button?

Dec 28, 2011

The sceanrio is that I use vba to create commandbutton and make that commandbutton call a macro

Code:
With ActiveSheet.Buttons.Add(183.75, 38.25, 96.75, 38.25)
.Name = "Test"
.OnAction = "anothermacro"
End With
ActiveSheet.Shapes("Test").Characters.Text = "Test"

View 3 Replies View Related

Macro That Will Execute Command For Excel Add-in

Oct 1, 2012

I would like to add a command to my macro that will do one simple step: Refresh all FDS Codes

FDS I believe is short for FactSet Data Series. FactSet is an add-in for excel we use at work. The FactSet menu button is in my ribbon and when I choose that add-in, there are a number of actions I can execute. One is to refresh all FDS which is to refresh all cells with formulas that pull in data from our FactSet database.

I tried recording this action but VBA does not show any key strokes from those steps so I think I just experienced one of the many shortfalls of recording macros. Is there a way to write the macro to execute this action? I would think since I am using a FactSet add-in, it would be possible but I don't know where to begin.

View 1 Replies View Related

Assigning A Macro To A Command Button

Mar 26, 2007

i have created a very simple macro and wish to assign it to a command button i have placed on my worksheet.

View 9 Replies View Related

Assigning Macro To Command Button

Oct 17, 2008

Using workbook A, I have created a new workbook (let's call it workbook B), and have copied a module over to workbook B using macros.

My question is, is there a way to assign the module to a command button using vba?

View 9 Replies View Related

Code To Repeat Macro Command

Nov 21, 2008

I haven't worked much with macros and the work I have had to do so far I have been able to figure out by searching forums such as this one. However, I need this community's help with what I am currently working on. Here's the code I have so far:

Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("E2:E2")) Is Nothing Then
Exit Sub
Else
Range("D1").Select
Selection.AutoFill Destination:=Range("D1:D2"), Type:=xlFillDefault
Range("D1:D2").Select
End If
End Sub

I need this code/behavior to repeat in cells E3:E10, skip a couple rows, then repeat in E13:18 skip a couple more rows, repeat in E16:E21, etc.

Version: Excel 2000
OS: XP Pro

View 9 Replies View Related

Macro For Command Button To Transfer Value

May 26, 2009

I need a macro for a command button to perform the following:

If B8 is the active cell and I click the command button,
transfer value from:

B3 to B8
D3 to D8
E3 to E8
F3 to F8
G3 to G8
H3 to H8
I3 to I8

Likewise, if B9 is the active cell and I click the command button,
transfer value from:

B3 to B9
D3 to D9
E3 to E9..........

View 9 Replies View Related

Call A Command Button In A Macro

Apr 22, 2006

I have created a command button so that the sheet asks for a password. Now I need to include that in an already created code. I have created a command button as:


Private Sub CommandButton1_Click()
If LCase(Me.TextBox2) = "password" Then
Run "Showall"
Else
Run "Hideall"
End If
End Sub

Can someone tell me how to call this macro in another macro. That is when another macro is running and if the condition fails, this macro should be called. Is it something like run "CommandButton1"?

View 9 Replies View Related

Color Macro Command Buttons

Oct 29, 2006

I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.

My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?

View 7 Replies View Related

Macro Command Button Larger With Each Use

Mar 5, 2007

I have a command button in a spreadsheet that for some reason each time I click it, the button and text gets larger. I can edit the button to shrink it down again, but can't stop the growth...

View 6 Replies View Related

() Creating A Search Command Button (Macro)

Feb 5, 2009

I am trying to create a uniform stock database for my company. Thus far, I have 2 worksheets. The first is a face sheet, for the user to interact with. This face sheet has a number of drop down menus on it allowing them to select "Type" and "Size" of the item they need. This information is then translated (by a hidden table) into an item code.

The second sheet contains a list of all the uniform items currently in stock. Each item has its individual code that correlates to the code the face sheet generates.

My question is regarding a search macro.

I want the user to be able to click a command button on the face sheet, labelled "search". This would then take the generated "Item Code" and search for it on the second worksheet. I am aware that it would be very easy for them to simply copy the code into "find" on the second sheet, however it needs to be as easy and quick to use as possible.

View 7 Replies View Related

How To Launch Macro Or Other Userform After Command Button

Apr 6, 2009

I want to launch userform A when the user hits the command button on userform B, I already have a macro set up to launch UserForm A and tried adding it to the code but it doesn't work.

View 13 Replies View Related

Using Macro To Enter Variables To Shell Command

Oct 12, 2009

I want to run a Shell command to open lots of files.

I can get the basic command working, but I want to open a lot of different files and am seeing if there is a way to save time by having a variable input, rather than having 1000 different shell lines with IF statements.

View 8 Replies View Related

MACRO To Move Two Cells In Another Sheet Via Command Box?

Sep 25, 2013

I need a macro code via the command box to move Sheet 1 H30 and I30 to Sheet 2 B57 and F57, RESPECTIVELY.

View 1 Replies View Related

Command Button Moving After Macro Runs

Jan 25, 2008

My command buttons are moving location after I run a macro. I have a worksheet with 5 command buttons from the forms toolbar. When the macro is run, another command button is moved into the cell that the macro ends in, how can I stop this?

View 7 Replies View Related

Run Macro Procedure From UserForm Command Button

Mar 14, 2008

I have constructed a Userform with two button options - Run a Sub that I have already written and runs fine, the other to close the userform.

how to correctly assign the completed macro ( Name: "Run_Report") to the button click action. The code below is what I have, but it does not run:

' This is the run macro code
Private Sub CommandButton1_Click()
Run_Report
End Sub

' This is the quit UserForm code
Private Sub CommandButton2_Click()
Unload Me
End Sub

The quit command works, just not the run macro - do I need quote marks, parenthesis, or a .Run command or something?

View 5 Replies View Related

Loop Command Macro To Copy Data Between Worksheets

Aug 11, 2009

I am having trouble creating a macro for an excel file I am working on. I do not have much experience writing macros, so I apologize for any confusion. I have created a simplified version of the file I am attempting to write a macro for and attached it to my post here.

At this point it would be helpful for you to open up the attached file so that you can understand my explanation.

Basically what I want the macro to do is:

1. Match up "Product" on Wksht(Input) with "Product" on Wksht(Data).

2. Copy the "Usage per ton" and "Dollars per ton" values corresponding to the given product from Wksht(Input) to Wksht(Data) for the correct month. (The user will manually enter the month, ie "August 09" into Wksht(Input) each month when he runs the macro.)
++The color fills will not exist on my finished macro. I only put them there to illustrate the values that will be copied and pasted.

I want the macro to be written with Loop commands so that it will check to be sure the product number matches with the given location for pasting the data values. I should also note I use PasteSpecial_Values because of the formulas in the cells on Wksht(Input).

View 12 Replies View Related

Adding New Month Sheet Using Command Button Macro

Sep 6, 2013

CASH BK
CASHIERS
DATE
CASH
TOTAL
DIFF
SALES
GBP
AR
GBP
AR
GBP

[code]....

above is the sheet template we use on a monthly basis. I would to like to use a command button which will run a macro creating a new sheet with the sheet name each month. The idea is to have a text box and a command button,enter the month in the text box and click the button. A sheet for the month to create at end.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved