I have the following lines in my macro:
Dim LastMonth As Variant
LastMonth = Year(Now()) & "0" & Month(Now() - 1)
Cells. Find(What:=LastMonth).Activate
I am trying to find the first instance of 2007+previous month, i.e. April =04, in a data set. Not sure how to tweak this formula to make it work.
I need to find the row number of the first instance of the string 'TIMEACT
in column A. I know that it must exist at some point in column A, but I do not know where. Column A might have 100,000 entries... ie: a very large number, so I'd appreciate it if the code could be very general.
I am trying to provide a search string and then loop round searching for this search string until the beginning find cell is found again however I am having problems making my code work - here it is:
View 2 Replies View RelatedI have recorded a macro in Excel that copies the contents of a cell in one worksheet, then goes to another, selects a column, runs the Find command and then pastes the clipboard contents into the "Find what" field.
Naturally when I read the code back in visual basic the macro is now programmed to always search for the data I copied from the original cell. The problem is the data in that cell changes all the time so I need it to always copy whats in there and paste it into the Find what field.
I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case). Hopefully that makes sense!
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
I m trying to set a range on a cell after using the FIND function in a macro and was wondering if anyone had any experience in it.
Basically, I have a spreadsheet which I am looking up a value that i stored in FID1 with the extension "_EXE"
I'm using the FIND command to find that cell and then set a range so that I can mark it but am getting an error....
I can't find the Edit Links command in Excel. where it is?
View 1 Replies View RelatedI have a spreadsheet that I'm using as a call log for a support desk. Sometimes, when the problem is outside of my scope, I have to call in a ticket to a helpdesk.
I want to keep the call log separate from the ticket list, but I want to be able to reference a ticket number for a specific call or vice versa using a command button.
I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies View RelatedI have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
I have an Excel worksheet with a DDE link that continually displays the latest data from a trading platform.
I want to create a second worksheet with a list of times in column A from midnight to 23:30 in 30 minute increments.
At each 30 minutes during the day I want to capture the latest data from worksheet A and store it beside the appropriate time in worksheet B.
But I don't know how to execute a command or macro at a time that is in a cell. My problem is getting the current time to match the cell value.
I have created a command button from the Excel 2003 from the Macros toolbar that I placed on my worksheet. I want to use this button to activate an existing macro. Currently I have no code entered for this button and the button when clicked on behaves as an object to be edited, moved, etc. How should I proceed?
View 6 Replies View RelatedI can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................
What I want to do is be able to make a command on a range of cells. Every cell you would click would make a calendar box pop up. Then you select the date from the box and it enters the date into the cell. I found a easy way to go about doing this on a dropdown box but the boss didn't want that.
I have been trying to figure this out all morning.
I am trying to attach a recored macro to work via a command button - but keep getting the error message "select method of Range class failed.
When I run the macro through the normal way it works, but I want to be able to click on a Command button for it to work.
I have copied the recorded macro code to the command buttons code field
Do I need to use the code for the Cmd Btn to tell it to run the Macro -
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedI have a problem with multiple, similar formulas in a macro. Each of these formulas, depending on the active cell, selects a certain range of cells and prints it.
The problem is, no matter which active cell I'm on, the macro activates all lines of the formula and separately prints each range. Is there a way to "separate" these lines in the formula so each range will print separately, depending on the active cell?
Here's the
The sceanrio is that I use vba to create commandbutton and make that commandbutton call a macro
Code:
With ActiveSheet.Buttons.Add(183.75, 38.25, 96.75, 38.25)
.Name = "Test"
.OnAction = "anothermacro"
End With
ActiveSheet.Shapes("Test").Characters.Text = "Test"
I would like to add a command to my macro that will do one simple step: Refresh all FDS Codes
FDS I believe is short for FactSet Data Series. FactSet is an add-in for excel we use at work. The FactSet menu button is in my ribbon and when I choose that add-in, there are a number of actions I can execute. One is to refresh all FDS which is to refresh all cells with formulas that pull in data from our FactSet database.
I tried recording this action but VBA does not show any key strokes from those steps so I think I just experienced one of the many shortfalls of recording macros. Is there a way to write the macro to execute this action? I would think since I am using a FactSet add-in, it would be possible but I don't know where to begin.
i have created a very simple macro and wish to assign it to a command button i have placed on my worksheet.
View 9 Replies View RelatedUsing workbook A, I have created a new workbook (let's call it workbook B), and have copied a module over to workbook B using macros.
My question is, is there a way to assign the module to a command button using vba?
I haven't worked much with macros and the work I have had to do so far I have been able to figure out by searching forums such as this one. However, I need this community's help with what I am currently working on. Here's the code I have so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("E2:E2")) Is Nothing Then
Exit Sub
Else
Range("D1").Select
Selection.AutoFill Destination:=Range("D1:D2"), Type:=xlFillDefault
Range("D1:D2").Select
End If
End Sub
I need this code/behavior to repeat in cells E3:E10, skip a couple rows, then repeat in E13:18 skip a couple more rows, repeat in E16:E21, etc.
Version: Excel 2000
OS: XP Pro
I need a macro for a command button to perform the following:
If B8 is the active cell and I click the command button,
transfer value from:
B3 to B8
D3 to D8
E3 to E8
F3 to F8
G3 to G8
H3 to H8
I3 to I8
Likewise, if B9 is the active cell and I click the command button,
transfer value from:
B3 to B9
D3 to D9
E3 to E9..........
I have created a command button so that the sheet asks for a password. Now I need to include that in an already created code. I have created a command button as:
Private Sub CommandButton1_Click()
If LCase(Me.TextBox2) = "password" Then
Run "Showall"
Else
Run "Hideall"
End If
End Sub
Can someone tell me how to call this macro in another macro. That is when another macro is running and if the condition fails, this macro should be called. Is it something like run "CommandButton1"?
I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.
My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?
I have a command button in a spreadsheet that for some reason each time I click it, the button and text gets larger. I can edit the button to shrink it down again, but can't stop the growth...
View 6 Replies View RelatedI am trying to create a uniform stock database for my company. Thus far, I have 2 worksheets. The first is a face sheet, for the user to interact with. This face sheet has a number of drop down menus on it allowing them to select "Type" and "Size" of the item they need. This information is then translated (by a hidden table) into an item code.
The second sheet contains a list of all the uniform items currently in stock. Each item has its individual code that correlates to the code the face sheet generates.
My question is regarding a search macro.
I want the user to be able to click a command button on the face sheet, labelled "search". This would then take the generated "Item Code" and search for it on the second worksheet. I am aware that it would be very easy for them to simply copy the code into "find" on the second sheet, however it needs to be as easy and quick to use as possible.
I want to launch userform A when the user hits the command button on userform B, I already have a macro set up to launch UserForm A and tried adding it to the code but it doesn't work.
View 13 Replies View RelatedI want to run a Shell command to open lots of files.
I can get the basic command working, but I want to open a lot of different files and am seeing if there is a way to save time by having a variable input, rather than having 1000 different shell lines with IF statements.
I need a macro code via the command box to move Sheet 1 H30 and I30 to Sheet 2 B57 and F57, RESPECTIVELY.
View 1 Replies View Related
