Code To Repeat Macro Command
Nov 21, 2008
I haven't worked much with macros and the work I have had to do so far I have been able to figure out by searching forums such as this one. However, I need this community's help with what I am currently working on. Here's the code I have so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("E2:E2")) Is Nothing Then
Exit Sub
Else
Range("D1").Select
Selection.AutoFill Destination:=Range("D1:D2"), Type:=xlFillDefault
Range("D1:D2").Select
End If
End Sub
I need this code/behavior to repeat in cells E3:E10, skip a couple rows, then repeat in E13:18 skip a couple more rows, repeat in E16:E21, etc.
Version: Excel 2000
OS: XP Pro
View 9 Replies
ADVERTISEMENT
Apr 14, 2009
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies
View Related
Aug 26, 2013
I am using the code below to combine the rang of cell values into 1 cell. with this code I need to select the range of cells manually and run the code then repeat it on the next row manually.
What I need is automatically find the range from selected cell till last cell in the row and run the cod for this range then do the same on next row until last row of the sheet.
Code:
Sub JoinAndMerge()
Dim outputText As String[code]....
View 1 Replies
View Related
Jan 27, 2014
I have a macro that does exactly what I need it to do, but it takes a long time.
There are 4 horizontal sections. The top section (code not included) is the total of 3 sections which are segregated by location.
For the 3 sections:
rows 101 to 172 (section 1), 198 to 269 (section 2), & 295 to 366 (section 3) have the same formula for every other column starting with column F ending with column AT (sums hrs)
rows 173 to 194 (section 1), 270 to 269 (section 2), 367 to 388 (section 3) have the same formula for every other column starting with column G ending with column AU (sums dollar amount)
the columns are corresponding dates
Below is the code snippet that produces the results for section 1. I repeat the same code pattern for each section.
Dim r As Long
For r = 101 To 172
With LaborDetail.Cells(r, "F")
.FormulaR1C1 = "=SUMIFS('Data '!C17,'Data '!C38,RC1,'Data '!C37,R1C)"
.Value = .Value
[Code] .........
View 6 Replies
View Related
Aug 22, 2008
I have created a macro that copies the outcome of a specific calculation (that is driven by random numbers) and pastes it (as values) into a seperate table. It then recalculates the sheet, copies the new outcome and pastes it into the same table at a row beneath the previous one.
However, I would like to be able to determine how many times this loop is repeated (i.e. how many rows of outcomes will be generated) without having to change the macro each time. Is this possible? Maybe by just linking it to a cell where the number of outcomes/repeats is specified.
View 9 Replies
View Related
Mar 20, 2012
I am trying to repeat this macro until the last row of data present in column "D".
Sub inserttext()
'
' inserttext Macro
'
'
Range("D2").Select
ActiveCell = "Test Description:" & Chr(10) & "" & Chr(10) & "Expected Results: ERROR level fires stating " & ActiveCell
Range("D3").Select
End Sub
View 4 Replies
View Related
Feb 5, 2008
I have a workbook with 4 worksheets. I have a macro ( Cntrl + U ) that runs a series of steps and prints the results with it ending on the beginning page. This works well but I want it to repeat the macro until it reaches a blank cell on the starting page.
View 9 Replies
View Related
Aug 29, 2009
can I add to a macro that will repeat that macro on every subsequent worksheet in the workbook.
View 4 Replies
View Related
Apr 19, 2014
How to repeat excel Macro?
View 11 Replies
View Related
Feb 6, 2014
I am trying to do a vlookup within a macro.
However this always shows the first result in the first row but the rest of the rows just show #REF.
I want it to look up 100's or rows and shows either the result or N/A
Once I create the macro this is what the VBA is telling me: [Code] ......
View 3 Replies
View Related
Mar 9, 2014
I have many set of numbers in column A and Coulmn B each set separated by space.I need to repeat each set to n number of times.
View 14 Replies
View Related
Jul 6, 2007
This macro is recorded, but I need it to start on row 2 and repeat down to row 3000. What changes do I need to make.
View 13 Replies
View Related
Mar 13, 2012
I'm trying to create a macro to input information into a cell then repeat until the information stops.
So say I have 10 rows of information that fill up A1:D10. in E1:E10 I'd like a macro to insert some data into E1 then go to E2 and do the same until the end and then stop. So since A11:D11 would be blank the formula would just stop.
I actually work on 100's of cells a day and this is for a bigger project I'm trying to put together or I would just drag.
View 7 Replies
View Related
Sep 3, 2012
This auto run macro does not seems to run/repeat itself daily. I can't figure out why am I missing something? My end result should be that these reports run at the times listed on the macro every day 24/7. The spreadsheet will be on a computer that is never off.
VB:
Private Sub Workbook_Open()
Application.OnTime TimeValue("8:00:00"), "AThirdshift"
Application.OnTime TimeValue("8:00:00"), "BThirdshift"
Application.OnTime TimeValue("8:00:00"), "CThirdshift"
[Code] .......
View 1 Replies
View Related
Jun 14, 2008
I have a very simple macro for recalculating formulas and printing the page.
I need a way to show an input box where the user can say how many times to repeat the process i.e. 2x = recalculate, print, recalculate, print.
View 11 Replies
View Related
May 11, 2012
I'm trying to repeat a macro a set number of times depending on the number a person inputs into cell B3.
Here it is currently:
Columns("C:D").Select
Range("C4").Activate
Selection.Copy
Columns("E:E").Select
Range("E4").Activate
Selection.Insert Shift:=xlToRight
Range("C3:D3").Select
View 4 Replies
View Related
Jan 22, 2014
I've recorded a macro which selects a few cells in a row, copies them and pastes them again over the same cells (special paste - only values), and I've attached this macro to a button.
I would like the macro to repeat the same action on the next row for the same columns, each time the button clicked.
How to update the macro to move to the next row each time initiated?
View 5 Replies
View Related
Nov 27, 2008
I have spreadsheet which consists of two columns of data.
Column A contains a gerneric heading/group and Column B details some results for each heading/group; these results cover between 16 to 40 rows.
Basically, I need to transpose each heading/group's rows of results data into the same row as the heading/group row; then delete the rows where the results data was copied from; then I want to go to the next heading/group in Column A and repeat the process - transposing the results into a row.
I have written a simple macro which seems to work intermittingly - one which doesn't repeat or loop though. Sometimes I get the Runtime Error 1004 and sometimes the macro overwrites the transposed row if the results are listed over 16 rows.
My draft macro code is as follows:
Sub Transpose()
'
' Transpose Macro
' Macro recorded 27/11/2008 by Hunter
'
' Keyboard Shortcut: Ctrl+p............
View 9 Replies
View Related
Jan 15, 2010
Sub For_Adam()
For x = 1 To Range("G7")
Calculate
Range("G11").Select
Selection.Copy
Range("B15").Select
ActiveCell.Offset(x, 0).Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Next x
Application.CutCopyMode = False
End Sub
Now all I want is for this to be repeated in the next column, so everything is exactly the same but it doesn't start in B15, but starts in C15, then D15 etc.
View 9 Replies
View Related
Apr 19, 2014
I have never built or used a macro before and need very clear step by step instructions. I am just assuming that a macro is the answer to what I am looking for but if there is a simplier solution that would be fantastic.
I need to be able to repeat a row of data a specified amount of times.
Example:
3 Yellow James
2 Green Mark
5 Purple Sue
1 Orange David
Needs to look like:
3 Yellow James
3 Yellow James
3 Yellow James
2 Green Mark
2 Green Mark
5 Purple Sue
5 Purple Sue
5 Purple Sue
5 Purple Sue
5 Purple Sue
1 Orange David
View 7 Replies
View Related
Apr 27, 2014
I have 2 sheets of date. Sheet 1 contains a temple range A3:T162. This set of data is repeated x number of times. Sheet 2 contains a range of data A1:A3 repeated x number of rows. The data is different on each row. So if I have 10 rows of data in Sheet 2 , there will be ready in Sheet 1 10 sets of dats, as in range A3:T162.
I would like the following action:
the contents of Sheet 2 Row 1 to be pasted into Sheet 1 cell A3,B3,C3
then contents of Sheet 2 Row 2 pasted into A163,B163,C163,
then contents of Sheet 2 Row 3 pasted into A323,B323,C323,
So basically each consecutive row on Sheet of column A,B,C is pasted back onto Sheet 1, 160 rows below until all contents of Sheet 2 has been exhausted.
I have attached an excel sheet with the relevant data.
View 6 Replies
View Related
May 6, 2014
I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.
Sub Macro1()
'
' Macro1 Macro
'
[Code]....
View 3 Replies
View Related
Aug 10, 2011
I have a workbook where I need to sort data with range (K2:L24), then move down 208 rows and sort range (K210:L232) and repeat this upto 1000 times. I have shortened a recorded macro as an example and would like to know how to loop or repeat.
Sub Macro2()
'
' Macro2 Macro
' Macro recorded 6/04/2011 by Greg
[Code].....
View 4 Replies
View Related
Jan 6, 2014
I am new to macro. I am trying to convert the following from column 1 to column 2.
1
1
0
1
3
3
[Code] .....
In the left column, the numbers who are greater than 0 can have the same number of rows of zero.
Is there anyway I can do it to convert Column 1 to column 2.
View 5 Replies
View Related
Mar 24, 2009
I have 10 worksheets. They are labelled 'FEB', 'MAR', 'APR', etc...to 'NOV' (NB: JAN & DEC not needed). In column "G" on all these sheets I have the data as "CURRENT" or "OVERDUE". The first 3 rows on every sheet are headers, so the data starts at 'G4' on every sheet.
I then have an "OUTSTANDING" sheet which will display all of the "OVERDUE" items from the various months. I have an UPDATE_Click() event which when actioned needs to search all the column Gs in the month sheets and then copy the data from column 'B' to 'F' of the corressponding row to an "OVERDUE" result. The data from B-F then needs to be pasted in the next available row on the "OUTSTANDING" worksheet (starting at row 4, as first 3 rows are headers with merged and unmerged cells).
Nothing fancy, when the search go does the column and hits a blank cell that means its the end of the list and can move on to the next month.
View 9 Replies
View Related
Sep 7, 2012
Im trying to get my macro to open allow me to select multiple workbooks, then have each workbook open up and copy A2:N2 and down and paste these into my active workbook, under each other, ie on the next available row (basically combining all the workbook data together to create a big list.
The below code works to open a single workbook, copy the data and paste it in at the next available row, but I have to keep running the macro for each workbook whos data I need to import!
How can I modify this code so I can select more than one file? I need something like for each wb .....at the end next wb...until the macro has done the below for all selected workbooks.
VB:
Sub openandcopy()
Dim wb As Workbook
Dim ws As Worksheet
Set ws = ActiveSheet
Set wb = Workbooks.Open(Application.GetOpenFilename)
[Code] .....
View 4 Replies
View Related
May 20, 2013
Keep getting compile error.
Sub CreatingCT()
'
' CreatingCT Macro
Dim ConsolidatedTrend As String
'Path to File
ConsolidatedTrend = "(d:2013"&(IIF((MONTH(NOW())+1>9),"(1","(0")&(MONTH(NOW())+1)&") "&TEXT(DATESerial(YEAR(NOW()),(MONTH(NOW())+1),1),"MMM")&"Consolidated Trend - "&YEAR(NOW())&" "&MONTH(NOW())+1&" + "&(12-(MONTH(NOW())+1))).xlsb)"
ActiveWorkbook.SaveAs Filename:=ConsolidatedTrend, FileFormat:=xlExcel12, CreateBackup:=True
End Sub
View 5 Replies
View Related
Mar 4, 2014
I need to repeat the following copy past macro the number of times equal to the value in column B and repeat the process for rows 3 through 27. It would end up being a loop with in a loop. The data in C3:H3 will be pasted onto the "Fixt#" sheet as many times as the value in column B3. The idea is to create an individual entry on the "Fixt#" sheet for each row on the "Totals" sheet.
Code:
Sub Create_Fixt_SheetI()
'
' Create_Fixt_Sheet Macro
'
'
Range("C3:H3").Select
Selection.Copy
Sheets("Fixt#").Select
ActiveSheet.Range("B" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
View 3 Replies
View Related
Apr 29, 2008
I have a 2 worksheets. One "Projects in Process"and the other "Project Completed". when the users fill in the information in cells A4-F4 (line 4 is the starting line and it could go down as far as line 23 or a23 - f23) In Projects in Process they press a "completed Project" command button and the data in a4-f4 copies over to worksheet "Projects completed". In the next available row (starting at row 4).
View 13 Replies
View Related
Feb 25, 2009
So right now I have the
Private Sub CommandButton19_Click()
Dim product As Double
product = ActiveSheet.Range("J45").Value * ActiveSheet.Range("S44").Value
Sheets("Sheet3").Range("R2").Value = product
End Sub
I want to be able to switch the cell the product goes into based on a certain command button that I click(for example I have a command button for when I use copper wiring and one for aluminum wiring and I want when I click the copper wiring button for the product to show up in one cell, but when I click the aluminum button for the product to show up in a different cell , but on the same sheet). To be more clear I have a quantity command button(which is the code above) that i want to be able to recognize the difference between when the aluminum command button is clicked and when the copper command button is clicked.
View 9 Replies
View Related
