What I want to do is be able to make a command on a range of cells. Every cell you would click would make a calendar box pop up. Then you select the date from the box and it enters the date into the cell. I found a easy way to go about doing this on a dropdown box but the boss didn't want that.
I have been trying to figure this out all morning.
Userform1 on the attached file has a "Calendar" button to display a calendar that allows the user to select a date and have it placed in the Date Text Box. It simply doesn't work unless you click on the userform area where the calendar should appear - but how would the user know that?
View 2 Replies View RelatedI have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
Using Excel 2007 Calendar Control:
I want to select a date of choice from a calendar in a field within an Excel spreadsheet.
I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.
This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.
Developer
Insert
More Controls
Calendar Control 12.0
I have the following Calendar Macro. I want this to pop up when cell A5 is active vs assigning a Macro Button.
View 9 Replies View RelatedThe issue: I have a macro to create a new wsheet with a tabname from a cell in a sheet called Data. The cell value (from Data), is a date which is inserted when a date is seleted from a popup calendar.This cell value then names the sheet tab and also appears in cell M1 in the sheet just created.
Now, when I select another date from the calendar (to create a new sheet), the macro works perfectly-(it creates and name the new sheet tab with the new date and copy the new date to M1 in same sheet)...but, any sheets previously created will now change all values in cell M1 to the most recent selected date but all tabnames remain correct?
I am using a great pop up calendar without ActiveX made by a guy called Phil Johnson. When you click a specified cell the calendar appears. The only problem is that the calendar doesn't default to today's date when it opens.
I have the original file Calendar source code if anyone needs it.
I finally managed to create my very own macro calendar BUT it does not fulfill the function that I need it to neither do I no whether it is able to at all.
Basically, I have created a form that I distribute to Line Managers to complete and one of the fields is the date so the first problem with me macro is that it only appears on my PC and secondly I cannot seem to embed it in my workbook as a button. Is this possible?
change format of date in UserForm textbox base on value in selected item of combobox.
View 7 Replies View RelatedThe macro should...
1. Autofill dates from the Start Date ("D5") for x amount of years. Autofill begins in Range("C10")
2. Point out the THIRD 'wednesday' of every month with a "1" in column D.
3. Point out the second last 'weekday' of every month with a "1"in column E.
I have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
exporting outlook calendar to excel using a macro?
View 2 Replies View RelatedI am trying to create a macro that will automatically fill in the days for a user if they fix the date. That is my end-goal, but obviously I have to take it step by step.
My first complication is how can I fill in all of the day rectangle boxes automatically? I was trying to create a macro for it, but it would only change the very first box. (You can see from my sheet, the days go 3 then 2)
After that I want to try and have constant-macro where if they change the month and the year it will automatically update the calendar for the user.
I have a macro that displays a calendar with code to highlight the current date, but this part of the code does not work and the current date is not highlighted.
View 14 Replies View RelatedAttached is what I use as a Calendar Macro and it works great for single active cell use.
I have a column for 'Notes' and I can only use 1 cell per item so every time I have an update about a specific item I go the to notes section and put a date and leave few spaces then type in whatever the notes are. Currently I'm doing it manually and I tried to use my macro on the Notes column and what it does is to remove everything in the cell and replace it with whatever date I choose in the calendar.
find a way to use my current Calendar Macro to add a date in the cell instead replacing everything in the cell with a date.
I have an Excel worksheet with a DDE link that continually displays the latest data from a trading platform.
I want to create a second worksheet with a list of times in column A from midnight to 23:30 in 30 minute increments.
At each 30 minutes during the day I want to capture the latest data from worksheet A and store it beside the appropriate time in worksheet B.
But I don't know how to execute a command or macro at a time that is in a cell. My problem is getting the current time to match the cell value.
I have created a command button from the Excel 2003 from the Macros toolbar that I placed on my worksheet. I want to use this button to activate an existing macro. Currently I have no code entered for this button and the button when clicked on behaves as an object to be edited, moved, etc. How should I proceed?
View 6 Replies View RelatedI can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................
I am trying to attach a recored macro to work via a command button - but keep getting the error message "select method of Range class failed.
When I run the macro through the normal way it works, but I want to be able to click on a Command button for it to work.
I have copied the recorded macro code to the command buttons code field
Do I need to use the code for the Cmd Btn to tell it to run the Macro -
I have the following lines in my macro:
Dim LastMonth As Variant
LastMonth = Year(Now()) & "0" & Month(Now() - 1)
Cells. Find(What:=LastMonth).Activate
I am trying to find the first instance of 2007+previous month, i.e. April =04, in a data set. Not sure how to tweak this formula to make it work.
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedI have a problem with multiple, similar formulas in a macro. Each of these formulas, depending on the active cell, selects a certain range of cells and prints it.
The problem is, no matter which active cell I'm on, the macro activates all lines of the formula and separately prints each range. Is there a way to "separate" these lines in the formula so each range will print separately, depending on the active cell?
Here's the
The sceanrio is that I use vba to create commandbutton and make that commandbutton call a macro
Code:
With ActiveSheet.Buttons.Add(183.75, 38.25, 96.75, 38.25)
.Name = "Test"
.OnAction = "anothermacro"
End With
ActiveSheet.Shapes("Test").Characters.Text = "Test"
I would like to add a command to my macro that will do one simple step: Refresh all FDS Codes
FDS I believe is short for FactSet Data Series. FactSet is an add-in for excel we use at work. The FactSet menu button is in my ribbon and when I choose that add-in, there are a number of actions I can execute. One is to refresh all FDS which is to refresh all cells with formulas that pull in data from our FactSet database.
I tried recording this action but VBA does not show any key strokes from those steps so I think I just experienced one of the many shortfalls of recording macros. Is there a way to write the macro to execute this action? I would think since I am using a FactSet add-in, it would be possible but I don't know where to begin.
i have created a very simple macro and wish to assign it to a command button i have placed on my worksheet.
View 9 Replies View RelatedUsing workbook A, I have created a new workbook (let's call it workbook B), and have copied a module over to workbook B using macros.
My question is, is there a way to assign the module to a command button using vba?
I haven't worked much with macros and the work I have had to do so far I have been able to figure out by searching forums such as this one. However, I need this community's help with what I am currently working on. Here's the code I have so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("E2:E2")) Is Nothing Then
Exit Sub
Else
Range("D1").Select
Selection.AutoFill Destination:=Range("D1:D2"), Type:=xlFillDefault
Range("D1:D2").Select
End If
End Sub
I need this code/behavior to repeat in cells E3:E10, skip a couple rows, then repeat in E13:18 skip a couple more rows, repeat in E16:E21, etc.
Version: Excel 2000
OS: XP Pro
I need a macro for a command button to perform the following:
If B8 is the active cell and I click the command button,
transfer value from:
B3 to B8
D3 to D8
E3 to E8
F3 to F8
G3 to G8
H3 to H8
I3 to I8
Likewise, if B9 is the active cell and I click the command button,
transfer value from:
B3 to B9
D3 to D9
E3 to E9..........
I have created a command button so that the sheet asks for a password. Now I need to include that in an already created code. I have created a command button as:
Private Sub CommandButton1_Click()
If LCase(Me.TextBox2) = "password" Then
Run "Showall"
Else
Run "Hideall"
End If
End Sub
Can someone tell me how to call this macro in another macro. That is when another macro is running and if the condition fails, this macro should be called. Is it something like run "CommandButton1"?
I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.
My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?