Macro Putting In The Formula As Text Instead Of Results
May 28, 2008
My macro contains a VLookup formula that is giving me the text of the formula instead of the results. A portion of the macro is, as follows:
Sheets("Survey Results").Select
Range("c1").Value = "Resolving Group"
Range("c2").Select
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-1],'Survey Invitation'!C[-2]:C[-1],2,FALSE)"
Range("C2").Select
Selection.AutoFill Destination:=Range("C2:C900"), Type:=xlFillDefault
Range("C2:C900").Select
Range("C2").Select
The VLookup statement appears in place of the result when the macro is run. This is Excel 2007 and it runs to the end without error.
View 9 Replies
ADVERTISEMENT
Jan 8, 2010
I'm trying to enter relatively simple drug calculation formulas in Excel where the result is appended with the proper units to administer. For example, if I'm calculating for units of regular insulin with a formula such as:
=0.75*f2
I'd like the cell to make the above calculation, and append it with "Units Reg Insulin" or something similar. Thus far, I've just been putting the units as text in adjacent cells but the result looks a bit messy.
Is this possible? I'm using Excel 2007 and the Help index does not seem to offer much guidance about this.
View 8 Replies
View Related
Aug 14, 2013
So basically I have a spreadsheet that tracks if a patient has turned in there required paperwork within the last 6 months and then changes the cell to white and lets me know how many days they have left until they are due to turn this paperwork in again. Then if it has expired I have a condition format change the cell to Red but I would like to add in the text EXPIRED to the cell. lastly I have Cells that have no data in them gray and I would like to add in red text saying No Paperwork.
I'm hoping this will be my last build of this spreadsheet so I can go ahead and start applying it to the real workbook [URL]
View 12 Replies
View Related
Nov 9, 2007
I know you can select all cells with a formula.
I know you can select all cells with constants
What about selecting all visible text (and results of a formula) on a page?
View 9 Replies
View Related
Oct 29, 2009
I am comparing each cell of column A with Column D to match it. I have almost 60,000 records in each columns. Now, I want to show the result of the mismatch in column B as "No Match".
Below is a sample of what I am trying to achieve.
A B D
adam No Match Bill
Wales Charlie
Charlie Denny
Charlie
Wales
I tried to record a mecro with formula (=IF(ISNA(MATCH(A2,$E$2:$E$65536,0)),"No Match","")). It works fine with fewer records but when i try it with my original file it fails.
I also tried to write a macro without formula but no success. It only worked well with fewer records.
What am I doing wrong? Is there anyway to solve this?
How to create a macro using the same formula (=IF(ISNA(MATCH(A2,$E$2:$E$65536,0)),"No Match","")) I used to run it manually.
View 9 Replies
View Related
Feb 24, 2009
I want to be able to automatically put the calculation of one cell, into the text of another cell.
so....
Cell A3 = A2-A1
And in another cell say B3, i want to be able to write text that says "The value of cell A3 is 'A3' "
View 10 Replies
View Related
Jul 10, 2008
In my excel sheet I have a list of where they go, which are basically excel cells.. i.e. A1 is the top left corner.
What I am trying to figure out how to do is, is there a way that I can get excel to see "A1" and then put it in A1 of another sheet on the bottom. Thus I get the same grid I have on the wall, making a map of my things.
Also, I could just cut and paste, but the problem is I'm working on organizing the stuff on the wall, and if I do it the way I want to, when I move things, they should automatically be moved on the chart.
So basically I need it to look at a cell for the reference, choose text from another cell (which will be concaternated(sp) text), and then place it in the referenced cell in the chart sheet.
View 13 Replies
View Related
Dec 15, 2013
I am trying to put text form 3 cells into 1 string. I got the 1st 2 but the 3rd I only want to extra the first part of the cell up to the 1st comma. This is what i have so far:
[Code] ......
For example cell E81 would contain "abc, def, ghi" . I want to add to the string above only "abc" and not the entire cell content.
View 4 Replies
View Related
Jun 1, 2007
Putting Text From A Textbox To A Cell On A Sheet. how do you do this?
View 5 Replies
View Related
Oct 23, 2008
I tried to put the following formula into a cell using vba, but I received alot of errors. here is the formula I am trying to put into a certain cell and I will use a variable to replace the row number in the formula
=IF(AD323<>"Open","",IF(OR(AND($AI323=TODAY(),$AJ323<>"Done"),AND($AN323=TODAY(),$AO323<>"Done"),AND ($AS323=TODAY(),$AT323<>"Done")),"Yes",""))
View 5 Replies
View Related
Mar 28, 2014
I inherited a price list workbook made up of multiple worksheets (some 30 pages). Each year the new prices (including % increase) are calculated by a formula in the row below each price (100's of rows and formulae).
Thus:
C1 might say £10
D1 says =C1+(C1*2.5%) £10.25 (it actually does some rounding too)
etc
It may seem odd having both rows but MD can see the before and after. The new price 10.25 must however be manually copied to C1 to avoid circular referencing and then D1 row hidden. Very laborious to repeat 100's of times.
Is there a way of first copying the entire workbook for the new year (easy) then by means of a macro looping through each formula cell of all sheets in workbook 1 and pushing the result to the new workbook and to the correct sheet and then to the same location but to the cell above. e.g. pushing £10.25 from D1 of sheet 1 workbook 1 to C1 of sheet 1 workbook 2 to become the new price for the coming year?
View 9 Replies
View Related
Jun 13, 2013
When I try to run the macro, an error comes up saying application-defined or object-defined error. The following code is the line in which I receive the error.
VB : tool.Worksheets("ALL").Cells(row1, "J").Formula = "='[TRB Database.xlsm]TRB Database'!$I$" & A
View 3 Replies
View Related
Apr 24, 2007
I would like to write a macro that would start by asking me something along the lines of, "Enter student # you want to print a report about." The # I enter would need to be stored as a variable in the VB code, and then my code would need to use the variable to do some search and replace operations. (Replace all instances of 10 (the default student number) with the variable I have specified).
I don't really know how to even start going about this. How do I get Excel to ask me for a variable, and then use that variable in code?
View 9 Replies
View Related
Oct 4, 2012
using this format *.#,##0_);*.(#,##0);*.0_);@*. I get this:
Bonds..................................
would like custom format to do this,
Bonds . . . . . . . .
note:@ sign activates text formatting, *=repeats .=character being repeated
I've tried putting space characters before and after the period - no luck
View 2 Replies
View Related
Mar 7, 2009
I am writing a VBA macro in excel. I have several sheets in this one workbook........one sheet for each day in a given month. Sheets for each day are labled as 3_1, 3_2 for march 1st and march 2nd respectively. I also have 4 sheets for the 4 weeks in a given month. The weekly sheets are labeled week1, week2 etc....
What i am trying to do is this:
In the week1 sheet i am trying to "put" a formula in say cell 9,12 which sums up the same cell in the first 7 days of the month. But i am having issues. Does anyone have a good way to do this via VBA?
David
View 9 Replies
View Related
May 9, 2006
I have a range that has formulas that are based on other fcells outside the range.
What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.
There could be a marco to run when this process is needed.
example attached
View 9 Replies
View Related
Jul 27, 2006
I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.
View 2 Replies
View Related
May 21, 2013
I have been using an IF,ISNA,VLOOKUP formula as follows which I am sure you are all familiar with :
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),"",VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
This formula works correctly, displaying the lookup value for K7. My query is between the"" I can place text to display when K7 is blank and this works correctly too. However I would like to place a formula in here. The formula is VLOOKUP(I7,Orig!A7:B35,COLUMNS(B7:B35)+1,0 i.e. the lookup value is now I7 and not K7 when K7 is blank.
I have tried the following and variations based on what I know but they return errors.
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),(""& VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0),VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
Any better way of using I7 as the lookup value when K7 is blank.
View 7 Replies
View Related
Nov 12, 2012
I have a document that is a subject index for book that has terms that reference page numbers. The structure is for example: Employment, 587, 592, 553, 605, 233 The term is always following by comma and then space and listing of page numbers that subject reference applies. In many cases the page number references are out of sequence and I need them to be in numerical sequence. i.e. Employment, 233, 553, 587, 592, 605 There are many subject terms in index and need to check and fix sequence of page references for each.
View 6 Replies
View Related
Oct 10, 2009
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies
View Related
Aug 24, 2014
I am trying to use a combination of Concatenate and IF formula to produce an email.
My input.
D4: First Name:
D5: Middle Name:
D6: Last Name:
D8: Organization:
Once all these are filled, I want the formula to produce a result like
FirstName.M.LastName@Organization.com
I have used the following formula.
[Code] .....
Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.
FirstName..LastName@Organization.com
How do I remove the additional (.) in cases where there is no middle name.
Attached File : Email Generator.xlsx
View 3 Replies
View Related
Feb 2, 2007
I am trying to add a formula to use the "Right" command in a macro, but I dont want it to remove any characters on certain cells. For instance i want to remove the seventh digit from the right only if it is a Zero. If it is any other number, i want it to skip that cell.
00234XX
021V54Q
1405RS1
5843TP1
So i would only want it to remove the zero from the top two and leave the last two as they are. The ammount of information changes on a daily basis so the formula would have to be able to distinguish the values of the first digit.
View 3 Replies
View Related
May 29, 2009
To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?
Example of formula:
=IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))
View 5 Replies
View Related
Oct 1, 2009
I have two cells. The first cell has the formula:
=CONCATENATE("D",TEXT(MATCH($B$6,'Zip Ranges'!$D$1:$D$157,0)+1,"0"))
which results in a col and row number (such as D65).
The second cell has the following formula:
=INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2)
^^
I wish to replace the 'D1" in the Match function with the results of the first cell's formula.
I assume Indirect would work, but I don't know how to code the formula to use it.
View 4 Replies
View Related
Jan 30, 2014
I am trying to get a code which searches each row for a keyword, and then assigns a value to it depending on what group of keywords it is.
For example, if the Name or Comment mentions certain fruit keywords, I want it to assign the value: "Fruit", and if it mentions certain vegetable keywords, I want to assign it "Vegetables", and if it is unrelated to either, I want to keep it blank. If the name/comment mentions both fruit and vegetables then I want it to say "Error".
Since the keywords I am using are mostly two letters, I want the search to only search for the two letters on its own, and not as part of a sentence. e.g. if the key word is ED, I don't want it to return a value for "I rested". Instead, I want it to stay blank.
i.e. I want the code to take information from column A and B, and assign a value based on the keywords in column D and E. As an example:
A B C
Name Comment Value
V1 Eating vegetables are good for you Vegetable
null lock out of ep. Fruit
S-1 It is JUST
Fruit-sp Error
D E
Fruit Vegetable
EP SW
KG SP
ST CM
BV LP
The formula I used so far is this: where C3 is the first value
C3=IF(OR(ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$D$2:$D$6,A3))),ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$D$2:$D$6,B3)))),"Fruit","")&IF(OR(ISNUMBER(LOOKUP(100,SEARCH(Sheet1!$E$2:$E$6,A3))),ISNUMBER(LOOKUP(100,SEARCH($E$2:$E$6,B3)))),"Vegetable","")
In columns D and E I put a leading and trailing space between each word to only search for the keywords themselves, and not as part of a word. (e.g. ST is correct instead of haSTe).
This formula seems to work only for 60% of the information, problems occur when the keyword is at the end of comment sentence: the value is blank. e.g. in row B4 of the table I made above my formula returns a blank.
View 1 Replies
View Related
Oct 13, 2006
Have a macro that copies a formula from each of 100 workbooks to a new workbook. I want to display these formulas as text and want a macro or someway to display these cells as text. I have tried to record a macro that presses the F2 key, the home key and the apostrophe. This works for the one cell but provides the following macro that does not work for anyother cell.
ActiveCell.FormulaR1C1 = _
"'=VLOOKUP($A$30,'G:Variance Reports FY07[Salary Dist Var Repts_Cur Mth.xls]end of July'!$E$76:$G$200,3)"
Range("B3").Select
View 2 Replies
View Related
Jun 12, 2009
I'm trying to do something very simple, but I haven't had any luck searching for a function in excel that will let me do it.
Column A is a list of directories on a server, i.e. 01april, 02april, etc.
Column B is the path to those main directories, i.e. /raid0/data/documents/april/
Column C is where users can can type "1" if they want the directory or leave it blank if they do not want it selected.
Column D, if the corresponding row in column C=1, will show the complete source path/filename based on Column A and Column B.
Column E, if the corresponding row in column C=1, will show the complete destination path/filename based on Column A and Column B.
This is all working fine.
What I want to be able to do now though, is somehow, when someone sends the document back to me, create an FTP queue. I can do this with BulletProof FTP, because it allows really simple text queues.
So, what I need excel to do is, when someone has finished selecting their files, is write the results to a text file like exactly like this (without the Line1:, etc.):
Line1: <text from D2>
Line2: 0
Line3: 0
Line4: 0
Line5: ?
Line6: <text from E2>
(then repeated for each row in the excel document until column A is returning blank)
Seems simple enough.. Any ideas?
Also, an extra question--> is there any way I can make Excel list a directory structure automatically? Could it display the file size for the entire directory? I don't necessarily want it to list every file, just the directory paths and size of each directory.
View 6 Replies
View Related
Feb 16, 2008
As I type in text into Excel often I see number signs instead of the text. Baffling - I have tried switching the format to wrap etc - nothing works.
Can anyone help - See attached file. The short solution is to retype the text - but this occurs alot and I am not sure why. Really appreciate your help.
View 3 Replies
View Related
Jun 30, 2014
I need a macro, or a formula that can identify if the words in the Words Column (Column A) is contained in Title Column (Column B). If it is, It displays as "Yes". If not, display as "No".
Case is not sensitive.
Words
Title
Displayed?
Christmas
Coworker has chronic hiccups
Yes
Excel
I Love Excel
Yes
Cartman
I Like Turtles
No
Ninja
Oh Christmas Tree
Yes
Tiger
Case of the Mondays
No
Chronic
Cute Monkeys
No
View 4 Replies
View Related
Oct 7, 2013
I've attached a spreadsheet. I want the order of the sentence to change based on the numbers and whether they are positive or negative. Below are more details and the spreadsheet has numbers.
"Total expense for September was 8 higher (lower) than prior year, driven by a higher (lower) claims expense and admin expense"
This might be hard to explain: For the second part (starting from "driven by", I would like the variable that explains more of the positive or negative variance (in the example, claims) to come first.
Here is a different example
Total expense for September was 6 lower than prior year, driven by a lower admin expense (claims is not included because it is higher)
View 8 Replies
View Related
