When I try to run the macro, an error comes up saying application-defined or object-defined error. The following code is the line in which I receive the error.
VB : tool.Worksheets("ALL").Cells(row1, "J").Formula = "='[TRB Database.xlsm]TRB Database'!$I$" & A
I'd like to be able to unlock the whole of a workbook by putting the password into a specific cell and then the whole thing locks again when it is saved. I have been able to find the coding to do this for a worksheet but I'd really like to be able to unlock the whole project.
View 7 Replies View RelatedI tried to put the following formula into a cell using vba, but I received alot of errors. here is the formula I am trying to put into a certain cell and I will use a variable to replace the row number in the formula
=IF(AD323<>"Open","",IF(OR(AND($AI323=TODAY(),$AJ323<>"Done"),AND($AN323=TODAY(),$AO323<>"Done"),AND ($AS323=TODAY(),$AT323<>"Done")),"Yes",""))
I am writing a VBA macro in excel. I have several sheets in this one workbook........one sheet for each day in a given month. Sheets for each day are labled as 3_1, 3_2 for march 1st and march 2nd respectively. I also have 4 sheets for the 4 weeks in a given month. The weekly sheets are labeled week1, week2 etc....
What i am trying to do is this:
In the week1 sheet i am trying to "put" a formula in say cell 9,12 which sums up the same cell in the first 7 days of the month. But i am having issues. Does anyone have a good way to do this via VBA?
David
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies View RelatedI'm trying to enter relatively simple drug calculation formulas in Excel where the result is appended with the proper units to administer. For example, if I'm calculating for units of regular insulin with a formula such as:
=0.75*f2
I'd like the cell to make the above calculation, and append it with "Units Reg Insulin" or something similar. Thus far, I've just been putting the units as text in adjacent cells but the result looks a bit messy.
Is this possible? I'm using Excel 2007 and the Help index does not seem to offer much guidance about this.
My macro contains a VLookup formula that is giving me the text of the formula instead of the results. A portion of the macro is, as follows:
Sheets("Survey Results").Select
Range("c1").Value = "Resolving Group"
Range("c2").Select
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-1],'Survey Invitation'!C[-2]:C[-1],2,FALSE)"
Range("C2").Select
Selection.AutoFill Destination:=Range("C2:C900"), Type:=xlFillDefault
Range("C2:C900").Select
Range("C2").Select
The VLookup statement appears in place of the result when the macro is run. This is Excel 2007 and it runs to the end without error.
I have been using an IF,ISNA,VLOOKUP formula as follows which I am sure you are all familiar with :
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),"",VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
This formula works correctly, displaying the lookup value for K7. My query is between the"" I can place text to display when K7 is blank and this works correctly too. However I would like to place a formula in here. The formula is VLOOKUP(I7,Orig!A7:B35,COLUMNS(B7:B35)+1,0 i.e. the lookup value is now I7 and not K7 when K7 is blank.
I have tried the following and variations based on what I know but they return errors.
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),(""& VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0),VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
Any better way of using I7 as the lookup value when K7 is blank.
How can I stop #DIV/0! in a cell which has a formula relating to a cell which will have a number inputted but at the moment is empty, without me putting a '0' in?
View 9 Replies View RelatedIn my excel sheet I have a list of where they go, which are basically excel cells.. i.e. A1 is the top left corner.
What I am trying to figure out how to do is, is there a way that I can get excel to see "A1" and then put it in A1 of another sheet on the bottom. Thus I get the same grid I have on the wall, making a map of my things.
Also, I could just cut and paste, but the problem is I'm working on organizing the stuff on the wall, and if I do it the way I want to, when I move things, they should automatically be moved on the chart.
So basically I need it to look at a cell for the reference, choose text from another cell (which will be concaternated(sp) text), and then place it in the referenced cell in the chart sheet.
I have a row that is a percent of sales with this:
=(F4*0.2+G4*0.1)*I4
"I4 will either be 1.0 or 0.5"
Now I want to have it so if this equation equals less than 100 with I4 being 1.0 to equal 100 OR if I4 is .5 then it should be 50. I have looked all around and I am no excel wizard so this is troubling me significantly.
I have a sheet with 2 colomns: client number and document number, as follows:
Client number Document number
1234 100012
1234 100042
4321 102233
4321 249123
4321 533213
4567 134123
7890 123451
7890 125675
7890 357353
I need to have a unique client numnber on 1 row with all his documents in one cell, as follows:
client number: document number
1234 100012, 100042
4321 102233, 249123, 533213
4567 134123
7890 123451, 125675, 357353
This seems simple but I can't figure it out. I want to grab the name of a worksheet and place the name in cell A1.
View 9 Replies View RelatedIt lists single clients on single lines, with various column fields that have autofilters (such as where th client came from, when they arrived, who is dealing with them, are they complete and so forth).
The final entry I need to include is a list of th policies (it is a financial business) they need us to consider, split into three columns of life policies, pensions and investments.
My problem is that I am unable to put more than one policy in each of those columns which can then be sorted through the filters.
How am I going to achieve this, yet still keep one client per line?
I am trying to put text form 3 cells into 1 string. I got the 1st 2 but the 3rd I only want to extra the first part of the cell up to the 1st comma. This is what i have so far:
[Code] ......
For example cell E81 would contain "abc, def, ghi" . I want to add to the string above only "abc" and not the entire cell content.
Putting Text From A Textbox To A Cell On A Sheet. how do you do this?
View 5 Replies View Relatedi am trying to Put a specific value i,e "NO Deliveries" in blank Cells in the same row based on value in 1st cell of the Row which has a fixed value . note:the columns and rows are dynamic for example: I want to put the value "no Deliveries" in cell C because its blank.
A B C D
% of Availability
0.00%
80.00%
Need to trimming certain information contained in 1 cell and putting them each in a column. I could do left, mid & right but this time there is inconsistency in the content of the cell.
I've attached a file which will further give you an idea exactly what I want (formula to be in Column M to P).
How to store a value in variable after concatenation of two values and putting it into the same cell.
Let assume, in cell A1, we have value 1 (numeric). And in code i have a variable with stored value as "%".
Now i want to concatenate 1 and % and put it back into cell A1 as 1%.
I have a written a code, but seems to be wrong one.
Sub Percentage()
Per = "%"
lr = Sheets("Process Overview").Cells(Rows.Count, 3).End(xlUp).Row
For i = 10 To Sheets("Process Overview").Cells(Rows.Count, 3).End(xlUp).Row
If Cells(i, 4).Value = "p" Then
[Code] ........
I have a range of cells, A1-N1, that contains the names of each of my excel worksheets in this workbook. (ie A1=Brittany, B1=Corey). Each table in this summary sheet is the totals for that person for the month. (ie Total of the scores from Brittany's worksheet for the month). Because we have frequent additions to our workforce, I need to change the names / reorder alphabetically every month. I am looking to put together a formula that will read the name from A1, use it as a sheetname! reference in a formula that will say --- Pull the value for E11 from the sheetname from A1. Example -- If A1=Brittany, then pull the value from E11 on the Brittany! sheet.I have been working through this all day. I am still relatively new to Excel and completely self taught through books. I can't seem to find a reference for this. In my mind it should be possible so that if I change the names on that original A1-N1 list that the tables will all dynamically change to those names and pull the values from the correct corresponding sheet to that name.
View 2 Replies View RelatedSo finally got my sumrpod working using this formula
=SUMPRODUCT(1*('Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[South Pac Load Tracker - MAR14.xlsm]SPECIALS TEAM NZ'!$C8:$C10000=A5))
Is there a way i can link 'Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[South Pac Load Tracker - MAR14.xlsm] to a cell so that when the next months tracker is created and the filename changes i simply change the filename in the cell which im using to reference the filepath/filename.
e.g A1 = South Pac Load Tracker - MAR14.xlsm
Formula would read =SUMPRODUCT(1*('Q:Documents13-14 FCGP CONTRACTING13-14 TrackingSouthPac - Team Use Only[' & a1 & ;]SPECIALS TEAM NZ'!$C8:$C10000=A5))
If I have a two files called test1.xls and test2.xls for example. Is it possible to link test1.xls to test2.xls by putting the filename in a cell?
i.e. In test2 put the filename in say A1 and in the link put the path and instead of naming the file you want to link to put in A1 instead.
I know it doesn't work if you do it that way I was just wondering if there was a way to do it.
"Smith B" is text in C1.
My current formula in C3 is a simple reference to a cell in another workbook:
=+'Z:Time Records2007[Smith B.xls]Daily Time'!$C1352
I would the formula to refer to C1 to get the "Smith B" part.
This would allow me to copy the formula to the right and reference different text as it looks at D1, E1, F1, etc.
To say it another way. I want to know if there's a way to make a formula that would result in looking at the file Smith B.xls by inserting a refernce to C1 in it?
=+'Z:Time Records2007["C1".xls]Daily Time'!$C1352
Say cell C5 contains the name of a project (workbook). eg
C5 = "[Project1]"
In my current workbook, I want to find the value in cell B8 of Sheet1 of the project shown in C5. If I wrote this directly, it would be "='[Project]Sheet1'!B8"
But the name of the project is a variable shown in cell C5 (as explained above). So I need a formula that will find the value in cell B8 of sheet1 of the project shown in C5.
I need to reference a cell to another cell in a different workbook (not opened), however the name of this workbook contains a variable in its name. Something like:
='C:[Week" & variable &".xls]R23'!$D$3
where variable is the number of the week. I have tried using a cell name instead of a variable: ='C:[Week=($B$3).xls]R23'!$D$3
and I get a dialog box to update values by selecting a file.
Actually I do want to copy cell N589 from all files excel (sheet1) in c:database2014 to my workbook click run into the row C.
is there any of you can solve it?
i want to return a value from a cell in another workbook where part of the the workbook name is determined by a date set on the current open sheet.
so on my open sheet i have a cell where the user can change the date and i want the below formula to then use the date to look at the relevant file.
any ideas would be appreciated. know how to do this in VBA but no clue with formulas.
what i am trying to do is concatenate part of a file name and a cell value which contans a date
=VLOOKUP(A4,[accountsummary17022008.xls]Sheet1!$A:$B,2,FALSE)
Anyone know of a way to detect if a cell is blank in a closed workbook?
Here's what I'm trying to do:
=IF(ISBLANK(closed workbook cell reference),NA(),closed workbook cell reference)
also tried:
=IF(closed workbook cell reference="",NA(),closed workbook cell reference)
Neither one worked. I'm using Excel 2007.
I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
=SUM(IF(AND([L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4>=182,[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet26!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet27!$I$4
how do I put a space?
12345 ** =A1&B2 gives me 12345CD
but I want 12345 **
