i am trying to Put a specific value i,e "NO Deliveries" in blank Cells in the same row based on value in 1st cell of the Row which has a fixed value . note:the columns and rows are dynamic for example: I want to put the value "no Deliveries" in cell C because its blank.
A B C D
% of Availability
0.00%
80.00%
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies View RelatedIn column A of my worksheet I have values starting from A4 as below:
A4-1000
A5-1000
A6-1000
A7-2000
A8-2000
A9-1500
A10-2200
A11-2200
A12-2200
A13-2200
and so on till A10200.
What is want is to put thick box borders for similar values using a macro. For e.g. i want to put the borders to first 3 cells together as these are of same value 1000, then it has to be put to A7 & A8 (Value - 2000), then for A9 alone, then for A10 to A13 together till i have values in column A.
I have attached the file with this post.
What I like a macro to do is:
Whenever a 'D' ends in column "Step 5" the last value of 4 cells to the left to be put in sheet 2 in reverse order.
I have a sheet with 2 colomns: client number and document number, as follows:
Client number Document number
1234 100012
1234 100042
4321 102233
4321 249123
4321 533213
4567 134123
7890 123451
7890 125675
7890 357353
I need to have a unique client numnber on 1 row with all his documents in one cell, as follows:
client number: document number
1234 100012, 100042
4321 102233, 249123, 533213
4567 134123
7890 123451, 125675, 357353
I know that I need to use Conditional Formatting, but I can't get the formula code correct.
This is what I need it to do:
If cell A2 is populated (not blank) AND cell B2 is blank, then cell B2 to be highlighted in bright red fill.
If cell A2 is populated (not blank) and cell B2 is also populated (not blank), then leave formatting as per normal
If cell A2 is blank then leave formatting as per normal
Basically, as soon as someone types anything into cell A2, cell B2 to turn red. Then once they have input something into cell B2, the red highlight can disappear. The inputs will be text, not numbers, so I can't use </>
I have tried varying circumstances of IFs, ANDs, NOTs, ISBLANKs etc and I can't crack
So I have this list (I made it a little bit shorter).
So what you see is two different tasks (01 and 02) and three different conditions (A, B and C). In column B you see the result I would like to have. '/Searchtask_01.html' in A1 belongs to conditions A, because it is in session A. However, '/Searchtask_01.html' in A10 belongs to conditions B, because it is in session B.
How to get the results in B with a formula?
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies View RelatedI have a similar question regarding coloring of empty cells between two cells with specific numbers as posted in below thread : [URL] .....
This is exactly what I want. But here I have some problem with formula.
=COUNTIF(A1:Z1,1)=1
Above formula could pick cell value 1 and color the empty cells in a row between the cells having value=1. But if I want to use the same formatting for other numbers like 2 or 3 it doesn't work.
For example in row(A1:Z1) I have A1=1, D1=1, and F1=2, K1=2, and O1=3, U1=3
I required multiple conditional formatting that could color the cells based on values first from A to D then from F to K and finally from O to U.
I'm using above formatting it works with cells having values 1 but its not working for 2, 3 or any other cells values.
I have already tried replacing 1 in above formula with 2 and 3 but it doesn't work.
I need a VBA to delete rows with blank cells within columns F - AZ
Columns A - E contain headers but also need to be deleted if cells in columns F -AZ are blank.
I have a spreadsheet that contains given answers to a multiple choice test. I want to count the number of times each possible answer has been chosen at the bottom of the column. I have tried to use COUNTIF and that works fine to give me the number times each answer has been chosen but there is just one annoying thing. If the given answer hasn't been chosed by anyone, a "0" is automatically entered into the cell. This tends to really clutter up the spreadsheet and I would prefer for the cell to be left blank if the answer hasn't been chosen by anyone.
The closest I can come up with is: {=IF(D1:D10="","",COUNTIF(D1:D10,"A"))} but unless the answer "A" is chosed in D1, the cell remains blank.
If "A" is chosed in D1, then the formula works and counts all the rest of the cells that have "A" as an answer.
I have spreadsheet of data, I need to extract any rows that have blanks cells in columns F or P or T.
If possible I would like a macro I could run that would cut all of the rows that meet the above criteria and paste them in to a separate sheet.
I am using Excel 2010 and I am trying to average the amount of days in a month to a daily average per person in my worksheet.
Total sales per person
A5 = 10 - This is the Grand total per person for column A
A6 =4
A7=6
Daily average per person
C5=2.6 - Average for all persons here
C6=2.0
C7=3.0
The formula I am using is:
=(SUMPRODUCT($A$6:$A$15,C6:C15))/$A5
Which gives me an answer of 2.6 in cell C5 as shown above which is what I am wanting.
Please note that my cell range for my staff goes from 6-15 for both Column A and C where the other cells are blank in both columns.
My question is, If I was to clear all the data in both Columns A6:A15 and C:6:C15, cell C5 would return to a #VALUE. How to I change the formula so that if the cells were Blank, cell C5 would also be blank until I enter data for each person again?
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have written such loop which I want to delete entire row when a given cell is empty:
Code:
lastrow = Cells(Rows.Count, "A").End(xlUp).Row
For Counter = lastrow To 2 Step -1
If Cells(Counter, 6).Value = "" Then
Selection.Rows(Counter).EntireRow.Delete
End If
Next
It works not the way I want. It has ommited some blank rows and also removes 5th row everytime I run it.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
I am trying to use VBA to populate the first blank cell in row 6 with the word "Short"
I keep getting sub or function not defined and I am sure its because I am trying to Frankenstein some code together to get it to work. So far everything works as I need but this last step.
I have created a form where a date and remark is added every few days. I am using Phone Number as the base of VLookup. I want a code so that the date and remark which is entered in a Text Box, is stored in the first available blank cell pertaining to that employee. I want the first date and remark to be under "Date 1" and "Remark 1".
Thereafter, if another remark is subsequently added for that employee, the form would ask to enter his phone number to identify which employee the remark pertains to. Then the Text Box where remark is entered should be stored under "Remark 1" if there has been no remark before, "Remark 2" if "Remark 1" already exists, "Remark 3" if "Remark 2" already exists and so on.
I do not want to enter it in a new row. I want to enter the remark in the next blank cell of the row which matches the employee Phone Number.
Untitled.png
I was wondering if someone might be able to assist me with using VB to insert a new row below a cell containing specific text.
For example:
- All of my data is in column A
-I want to scan all of column A, and if there is a cell that contains "ACHCAMERIGROUP M", then I want a blank row inserted below it. If column A does NOT contain that text....do nothing.
I'm trying to figure out the if conditions for this relatively simple problem. Basically, this is an import from a word document where the table strays onto a new page. I want to try and repair this with a bit of VBA.
This is what it looks like:
1: cell 1 |the content should all be in this cell
2: |but the import sometimes splits it into two
3: cell 2 |
Basically if and only if cell Ax is blank (in this example A2), then I want the rows to merge each cell and repair the table.
I have a row in a table from columns C to CZ. All the cells in the row contain a formula, between 1 and 204 cells in the row will have a value (i.e. will not be blank).
The cells with a value will start at column C and may or may not have a blank cell before no more values and blank cells to the end (Col GZ).
Example:
C D E F G H I J K >..........................GZ
23 34 67 74 2 34 6 2 56 all blank ("") to end
or:
C D E F G H I J K >..........................GZ
23 34 67 "" "" 34 6 all blank ("") to end
I need to hide the entire columns when the cells in this row are blank but NOT if the blank cell has valued cells after it (i.e. do not hide columns F and G in the second example.
I can do this by looping back from col GZ and hiding the columns one at a time, which is very slow. I am stuck on the code to select all the relavent columns and hide together.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
I have a cell in A1=(str identification is = ",) and in B1=(2). In C1 I want it to equal (str identification is = ",02) In C1 I have A1&B1
View 4 Replies View RelatedI am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I have a code now that in excel, when the button is clicked, will put file into a new email and format the email.
What I have been trying to do, is make it so that if Cell C10 is blank, you get a prompt telling you it must be filled out before you can proceed with the submission.
Here is the code now:
Sub SendTimeCard()
On Error GoTo err_handler
Dim OutApp As Object
Dim OutMail As Object
Dim subject As String
Dim body As String
' Be sure the workbook is saved first
ThisWorkbook.Save
[Code] ........
how to exclude a blanck cell from logic?
I have tried what you see below but neither works as desired.
If Not vData(n, 9) = 0 Then
If Not vData(n, 9)Is null Then
have corrected code error