SQL Query That Will Populate Data From Access To Excel Sheet Using Conditions
Jul 1, 2014
I have an Access table which has following fields:
ScanDate Number DataType
Type Number
Type1 Number
Type2 Number
BatchNo Number
Cases Number
Pages Number
Now I have a useform in Excel so that when the user selects the Date from the combobox then it should check for total batch numbers (Count(BatchNo)), total cases (Sum(Cases)),Total Pages(Sum(Pages)) where ScanDate= Date from the combobox group by Queue Number. The Queue Number consist of Type+Type1+Type2.
See attached the Excelsheet where the data should be populated to. WBCount.xls
View 1 Replies
ADVERTISEMENT
Sep 6, 2012
I've about 10 pivot tables in Excel that are populated via an External Query link to Access. In each case I have pre-written views with all the columns I need so that the query can just pick them up. Nine of the ten queries work perfectly, but one doesn't - reporting "Too Few Parameters - Expected 1" when I try and click on the "Return Data to Excel" in the import wizard.
I can see the column headers in Excel to select; so I'm assuming that it can parse the SQL but no results are being returned. Just to confirm though - results are returned (>8000 of them) in Access.
SQL code below:
Code:
SELECT z.pathdurationhours AS PathHours, Count(z.pathdurationhours) AS Paths,
Count(z.pathdurationhours)/(select count(*) from (select [activity date],
[conversion ID], count(*) from tbl_dfa_p2cdata group by [activity date], [conversion ID]) ) AS PCT
FROM (SELECT a.[activity date], a.[conversion ID], val( max(a.[interaction time])-min(a.[interaction time]) )
*24 AS PathDurationHours FROM tbl_dfa_P2CData AS a WHERE a.[interaction time]
"" GROUP BY a.[activity date], a.[conversion ID]) AS z
GROUP BY z.pathdurationhours;
View 2 Replies
View Related
Oct 19, 2012
I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.
btw...I am running Office 2010
View 2 Replies
View Related
Jan 22, 2014
I use Office 2010. I have an Access database that goes out and runs various queries from our systems of record. It then takes the data and dumps it into an Excel file. I have taken the info and created a file the grabs the raw data, converts it into Pivots and then Charts. All info is automatically updated however the size will change depending on what department is quering the data. It is really all done with a click of a button. I have tried to merely uncheck the "(blank)" but it comes back everytime the report is ran.
How can I keep it from returning??
View 3 Replies
View Related
Nov 26, 2012
I have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.
I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.
Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.
If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?
Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.
View 3 Replies
View Related
Aug 14, 2014
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls
View 13 Replies
View Related
Mar 12, 2012
I have the below code that will do a data dump of an access table into excel based on an SQL query, is there a way to do a select statement that can match against the data in column C on the spreadsheet.
like:
"Select * From Bsmart where Serial_Number = ##[EXCEL COLUMN C1:Lastrow]##
Code:
Dim bkNew As Workbook
Dim cnt As ADODB.Connection
Dim rst As ADODB.Recordset
Dim stCon As String
Dim SQl1, SQL2, SQL3, SQL4, SQL5, varSQl As String
stCon = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
[Code] .....
View 1 Replies
View Related
Jan 29, 2008
I have an access database that has many queries and in order to speed it up I have a Macro in access that runs it in no time, but I need to be able to run the query in access via a trigger in Excel and have come up with the below, but it's not working.
View 9 Replies
View Related
Aug 5, 2003
I am not sure how to setup the initial connection to the datbase from excel and was wondering what would be the best way to go about things. Is it possible to run the query stored in the database and pass it a value or would I be better off just coding it into a sqlstring within the macro.
Here is the query that is in the database...when run it asks for the "Status?" variable.
SELECT ordernumber, mobilenumber
FROM bookings
WHERE status = [status?];
So yes, really simple query but yeah just want to know how to pass it that variable from excel or can I just set it up in the actual macro to maybe read the status from a cell?
View 9 Replies
View Related
Feb 1, 2007
I have a database that has outgrown excel (over 77,000 rows now) so i now have it in Access. I want to replicate the following situation I used to have using lookups in excel with a query to the Access database: Paste a list of identifiers into an excel sheet. Values corresponding to the list are returned from the database in adjoining columns. The list can be from 10 to 300 cells long an returns data in 14 columns. I have had a go with the Import external data wizard which generates a query but have not been able to work out how to base the query on a list of cells in excel and have the query return values for each of the identifiers in the list.
View 2 Replies
View Related
Jun 30, 2014
I was trying to use IF and AND conditions to calculate values for a Col. but when I attempt to sum.
It appears that the value is always "0". Below is my test data.
Col. H Col. J
Qty Result
Row 713 0 <-Excel Formula: =IF(AND(H7>20,H7<=50),"1","0")
Row 825 1 <-Excel Formula: =IF(AND(H8>20,H8<=50),"1","0")
Row 960 0 <-Excel Formula: =IF(AND(H9>20,H9<=50),"1","0")
Row 10Total 0 <-Excel Formula: =SUBTOTAL(9,I7:I9) / =SUM(I7:I9)
View 3 Replies
View Related
May 10, 2009
I have been trying to pass a query to fetch data from Access database.
The query is:
sSQL = "Select Client+, Entry-ID, Type of Contact, Manual Creation, Date Created, Transfer-date, Respond SLA FROM BASE DATA"
The problem I am facing is in:
rst.Open Source:=sSQL, ActiveConnection:=cnn, _
CursorType:=adOpenDynamic, LockType:=adLockOptimistic, Options:=adCmdText
The error I am getting is:
Run-Time error '-2147........'
Method 'Open' of Object '_Recordset' failed...
View 39 Replies
View Related
Mar 1, 2014
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
View 6 Replies
View Related
Mar 26, 2014
I want to write down the code that will populate values in "Sheet1" from the Access table. The column headers shows "Envelope types", "Envelope Size" fields from the Access table and each cell should store sum(volume) for each month in the table.
As I can't upload access table in the attachment so I have exported data into Workbook named "tblmain" as attached. But in actual tblmain is Access table. consider it an access table.
wrting code that will fetch data from access table and store in all the cells of the table in "Sheet1" of Elevate workbook.
View 7 Replies
View Related
Nov 11, 2009
I need to create a new query that pulls data from a 2007 Access database into Excel 2007. When I invoke the 'From Microsoft Query' option after 'Data/From Other Sources', and then select 'MS Access Database*', the only file type presented is '*.mdb' . However, I need to pull from an '*.accdb' file type. I have both Office 2003 and Office 2007 installed.
View 8 Replies
View Related
Jan 17, 2007
I have an excel file that imports data from an access database. Now the user wants the database password protected I edited my code to include the line "user ID=admin;password=risk;" but I'm getting an error message stating: "Cannot start your application. The workgroup information file is missing or opened exclusively by another user."
I'm bothered because I did not create a workgroup information file. I just want a password on the database I did not create users and groups.
Note this code works fine without the password protection and the added line.
My
Sub Update_Click()
Dim rsData As ADODB.Recordset
Dim szConnect As String
Dim szSQL As String
szConnect = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source= C: est.mdb;" & _
"user ID=admin;password=risk;"
szSQL = "SELECT * from data"
Set rsData = New ADODB.Recordset
rsData.Open szSQL, szConnect, adOpenForwardOnly, adLockReadOnly, adCmdText
View 4 Replies
View Related
Jul 10, 2009
I have an Excel spreadsheet with a query to an Access table. The query pulls data from 2 columns in a table and pastes it to the spreadsheet. I am trying to update the VBA a little on one sheet and now I get the attached error whenever the code tries to run in Excel. Here is the code with the offending portion separated at the top.
View 2 Replies
View Related
Apr 26, 2014
I'm trying to auto populate a calender style sheet in Excel 2010 based on data from a Work Schedule sheet. The work schedule sheet contains a list of jobs, with each row representing a different job. There is a column for the start date (e.g. 25/04/14) and a column for the end date (e.g. 26/04/14). There are other columns which select resources such as people and vehicles. Each resource may appear on any one of several columns for each row, e.g. Site Operative 1, Site Operative 2 etc.
On the calendar sheet, in which one cell represents one day (e.g. 25/04/14), all the dates are shown along the top going right and all the resources are shown on the left going down.
On the calender sheet, in every cell I want a formula that will look at the Work Schedule sheet and see if that particular resource is being used on that particular date. If it does, the cell can display information from another cell such as the job number or job name to which the resource is assigned; if it doesn't, the resource isn't being used so it can display "Free" or "Available".
View 2 Replies
View Related
Jul 8, 2008
I'm trying to query a query in Access 2003, from Excel 2003.
The query in Access looks like:
AccessQuery: [SELECT VBAFunction(field1) FROM Table]
The query in Excel looks like:
ExcelQuery: [SELECT * FROM AccessQuery]
I use the following VBA code in Excel to excecute the query:
With ThisWorkbook.Worksheets(cDataSheetName).QueryTables.Add(Connection:=strConnection, _
Destination:=ThisWorkbook.Worksheets(cDataSheetName).Range("A1"), Sql:=strQuery)
.RowNumbers = True
.Refresh BackgroundQuery:=False
iResultRowCount = .ResultRange.Rows.Count
End With
When I execute this code I get the error message 'SQL Syntax Error' (Error 1004). When I remove the VBA function from the query in Access, it all works fine.
View 9 Replies
View Related
Oct 13, 2009
What formula do I use to populate certain cells (E5:E10 and J5:10) based on match with condition (E3) with cells from and in the ranges C2:C73 and D2:D73 without creating milelong IF formulas? I am almost at the goal... past 10pm here in Thailand and still at the office
View 2 Replies
View Related
Dec 8, 2008
I'm trying to build a query which matches two tables which say has a number like A#### , I want the query to give me the A number's which do not belong in the second table but which do in the first table. i believe i need an SQL query to do this?
View 2 Replies
View Related
Jun 6, 2012
I am using below code to delete the sheet from workbook.
For iTemp1 = Workbooks.Item(funEach.Name).Sheets.Count To 1 Step -1
Sheets(iTemp1).Select
If UCase(Sheets(iTemp1).Name) "TEMPLATE" And UCase(Sheets(iTemp1).Name) "WORKING" Then
Sheets(iTemp1).Delete
End If
Next
How can i avoid the below popup..
-Data may exist in the sheet(s) selected for delettion. To permanently delete the data press delete.
View 2 Replies
View Related
Feb 12, 2009
i am trying to use VBA to query a access database that i have i want to be able to pull the information that matchs either textbox4 or 5 i am using the code below but i am getting global errors.
Private Sub CommandButton1_Click()
Dim custname As Variant
Dim Custnum As Variant
Dim cnn As New ADODB.Connection
Dim rst As New ADODB.Recordset
custname = Range("TextBox5").Text
Custnum = Range("TextBox4").Text
With ActiveSheet.QueryTables.Add(Connection:=Array( _
"ODBC;DSN=Insolvency;Description=Insolvency;APP=Microsoft Office XP;DATABASE=Insolvency;Trusted_Connection=YES"), Destination:=Range("Listbox1"))
.CommandText = Array("SELECT * FROM POST WHERE Customer_Account_Name=" & custname & " AND Customer_Account_Number = '" & Custnum & "' ORDER BY Customer_Account_Number")
.Name = "Insolvency Post Query"..........................
View 9 Replies
View Related
Oct 10, 2003
I have multiple worksheets spread across multiple Excel files (1 worksheet per file).
All files are stored in the same folder, and all worksheets have the same column headers and structure. I need a block of code that will combine all of these worksheets into a single worksheet in a master Excel file. That is, the code needs to:
1. Open the first Excel file.
2. Copy the first worksheet's contents into the first worksheet of the master file, beginning at the next empty row it finds.
3. Close the Excel file, and move on to the next file.
4. Repeat.
So in the end, ten worksheets residing on ten different Excel files will be combined into a single worksheet in a single file. No breaks are needed between them, instead, the last row of a worksheet would be followed by the first row of the next one immediately below it. No aggregate functions involved, no sums, nothing like that (which is why I don't think I can use the Consolidate function in Excel).
View 5 Replies
View Related
May 29, 2007
I'm at a stand-still again, as my current task calls for a way to communicate between Access and Excel. I know where the data I want in my Excel workbook is, and there's a query in place to pull it into a table. What I'm trying to do is write a macro that will open that particular table in Access, run the query, select the table, open a particular worksheet in my workbook, and then paste the data in.
This isn't hard to do by hand, besides finding the right database among a mess of others. But I want someone who isn't me to be able to get ahold of the same data by running the macro. It'll make less work for me in the long run.
View 14 Replies
View Related
May 26, 2006
query_from_MS_Database_Database. how do i reference by name a query from an Access dbs (e.g., qyery_from_MS_Database_Database)...?
View 4 Replies
View Related
Nov 15, 2006
I have the following code for importing a query from Access to Excel.
Sub LoadAdditionalData()
Application.Run Range("AUTOSAVE.XLA!mcs02 .OnTime")
With ActiveSheet.QueryTables.Add(Connection:= Array(Array( _
"ODBC;DBQ=S:NBHD_RENEWALDatabaseNR DB_current.mdb;DefaultDir=S:NBHD_RENEWALDatabase;Driver={Driver do Microsoft Access (*.mdb)};" _
), Array( _
"DriverId=25;FIL=MS Access;MaxBufferSize=2048;MaxScanRows=8;PageTimeout=5;SafeTransactions=0;Threads=3;UserCommitSync=Yes;" _ ...............
I currently have filters set to 990 (finance code) and 3 (quarter) but I would like to be able to enter these parameters myself everytime the macro is run.
View 4 Replies
View Related
Mar 12, 2007
i have code accessing an access database running a "query" which has been defined in the database itself. i asm using ADO - no issues with this. works very well.
my problem arises when i change the query to take a parameter. this works ok when i execute in access but not with the code i am using for VBA / ADO. i have tried several techniques but none seem to work.
Dim rsReport As New ADODB.Recordset
Dim cnReport As New ADODB.Connection
Dim cmdReport As New ADODB.Command
Dim prmReport As New ADODB.Parameter
cmdReport.CommandType = adCmdStoredProc
cmdReport.CommandText = "testQuery-withParam"
With prmReport
. Name = "FullName"
.Value = "joe bloggs"
.Type = adChar
.Size = 8
.Direction = adParamOutput
End With................................
View 2 Replies
View Related
Jul 10, 2013
I'm trying to query Access for some data. One of the fields I need to grab is called MOD, which also happens to be a VBA function. How do I get Excel to recognize MOD as a field name instead of a VBA function? (Renaming it is not an option)
Code:
stSQL1 = "SELECT MOD FROM CST_ClaimbyLop WHERE CoCName='" & myCST & "'"
View 2 Replies
View Related
Mar 20, 2014
I have to import data into Excel from Access (yes, I have to import it to Excel and cannot use Access exclusively). When I import; however, the formatting does not come over correctly, most especially losing the formatting of numbers. I need one of two solutions:
1.) How to get the formatting to move over correctly?
2.) Or how I can save the formatting of a table, then be able to apply it as a "saved" format? The biggest thing is that the numbers will changed the number of decimal places and/or change from general numbers when I want to see them as currency.
The top table shows how i want this formatted, the bottom shows how it is importing.
View 2 Replies
View Related
