ROUNDDOWN Function
Jul 27, 2007
I have a cell that is called "Number of containers", this cell affects my "Freight costs" and several other cells. I want this cell to never contain decimals, I have used the format menu and changed the number of decimals shown but that does not affect the number itself. It still uses decimals when calculated. I want this cell to use no decimals and also to always be rounded off downwards (since there can never be more than a certain number of items in a container). Can I use the ROUNDDOWN function?
View 9 Replies
ADVERTISEMENT
Jul 27, 2009
I have formula as follows that I am trying to use in a Macro. It is working fine as a function by itself.
View 5 Replies
View Related
Jan 8, 2014
I've got a data dump that must be edited/converted prior to pushing it into a different main frame system. There can be NO decimals in the end result. Here's the challenge:
______Col A____Col B___Col C___Col D____Col E
Row1__TOT_____1Q_______2Q_____3Q______4Q_____
Row2__20.00____5.00_____5.00____5.00____5.00___
Row3__26.00____6.50_____6.50____6.50____6.50___
Row4___0.00____0.00_____0.00____0.00____0.00___
Row5_139.00___34.75____34.75___34.75___34.75___
Row6__13.00____3.25_____3.25____3.25____3.25___
Starting on Row 2, there's a break down of 4 quarters of data divisible by 4 using the whole number TOTAL of Parts in Col A.
The analyst must first break it down into 4 parts (as done in Col B through E). Then, round up and down appropriately to ensure that NO DECIMAL data is entered into another main frame system.
Can't copy one formula downward because if it ends in .50, the up/down sequence is diff from how it would be rounded if it ended with .75.
Need vba to be smart enough to evaluate "IF" and apply "THEN" according to what it sees in Col B's data and convert B, C, D and E appropriately. (I will tie this to a button within a toolbar to run the macro/vba when the conversion of B thru E is needed.
EXAMPLE:
IF B's data ends in: xx.00 or xx.50, then convert those 4 quarter's data accordingly:
ROUNDUP, ROUNDdown, ROUNDUP, ROUNDdown, (this one doesnt really matter but works)
IF B's data ends: xx.25, then convert those 4 quarter's data accordingly:
ROUNDUP, ROUNDdown, ROUNDdown, ROUNDdown,
IF B's data ends: xx.75, then convert those 4 quarter's data accordingly:
ROUNDUP, ROUNDUP, ROUNDUP, ROUNDdown,
Using ROW 6 as an example for how to handle xx.25's:
B6 would convert up to 4
C6 would convert down to 3
D6 would convert down to 3
E6 would convert down to 3
TOTAL after conversion = 13
View 9 Replies
View Related
Jan 29, 2008
I use this formula for converting date of birth to a number based on today’s date. I have tried to have the number.. 6yrs 6 months to print only 6 not 7 years old. How do I insert the rounddown formula into this formula
=IF((AD37=""),"",YEAR(AQ36)-YEAR(AD37))
View 9 Replies
View Related
Apr 8, 2014
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
View 14 Replies
View Related
Mar 20, 2009
Another interesting dilemma to solve. Using this formula:
View 2 Replies
View Related
May 14, 2013
Function Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
View 9 Replies
View Related
Apr 13, 2007
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies
View Related
Jul 23, 2013
I have a function
VB:
Function f1(Matrix As Range)
'Does something and returns f1 = a double
End Function
And a second function which defines and constructs a matrix of doubles to use as an argument in f1 to return a double:
VB:
Function f2(dD As Double)
Dim MatrixRed() As Double
Redim MatrixRed(1 To dD, 1 To 10)
For i = 1 To dD
For j = 1 To 10
MatrixRed(i, j) = i * j
Next
Next
f2 = f1(MatrixRed)
End Function
I get an output error (#VALUE). I think it has something to do with MatrixRed not being a range anymore?
View 2 Replies
View Related
Dec 3, 2013
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
View 2 Replies
View Related
Jul 17, 2008
I have created a List in excel of various tasks. (See attached example.) Each row contains one cell with a function which equals the cell above it and to the right. So the function for cell C3 would be D2. The only importance is that the cell mirrored is always the cell one above and to the right. However, now I would like to be able to rearrange this List, but the “one up and to the right” function will now be all over the place.
Is someone aware of a function which will target a relative location instead of an exact cell?
View 13 Replies
View Related
Nov 25, 2008
I keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
View 6 Replies
View Related
May 13, 2013
I am trying to nest an IF function with a CEILING function. If C10 is < 3.5, make it 3.5, however, if C10 > 3.5, CEILING (C10, 5)
right now it looks like:
If (C10
View 1 Replies
View Related
Mar 2, 2008
I have been looking around have this much code from this site, modified. What I am trying to do is calculate numbers by a position with cells D through K having numeric values. I have 'hardcoded' the cells (D2, E2, etc in the code below), but in reality I only want the current row (so if the formula is on the 2nd row, I want D2, if it is on the 3rd row, I want D3).
My problem is obviously the formula isn't working because I am not correctly tying back to the spreadsheet (Positioncalc.xls). When I put the formula in the spreadsheet it works, but in my script I get 0 everytime.
My Script:
Function Position(rCell As Range, Optional RightPosition As Boolean)
Dim vResult
Select Case rCell.Text
Case "QB"
vResult = (2*D2) + (2*E2) + (2*F2) + (4*G2) + (2*H2) + (1*I2) + (4*J2) + (3*K2)
Case Else
vResult = "Invalid Position"
End Select
If RightPosition = True Then
Position = vResult
Else
Position = "Position not valid"
End If
End Function
So, when I put =Position(A2,True) I expect to see the formula results of those cells calculated based on the position (QB, HB, etc with their unique formulas).
My next challenge after this is to highlight certain cells based on the Position. So if A2 = QB, I want cell D2 boldface and Red, etc. I have seen some scripts on colors and such here, so I might be able to figure it out.
View 9 Replies
View Related
Mar 26, 2009
I have a range of cells, for this example I will use 2.
Cell E17 = 77/170
Cell E18 = 8/9
Using the following formula: =SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)))
This bring back an #VALUE! Error as the second part of the formula keeps picking up "/9" however the first part works fine, displaying "170"
Now if I use:
=SUM(RIGHT(E17,FIND("/",E17)))+SUM(RIGHT(E18,FIND("/",E18)-1))
It all works. The problem is that I need this to be automatic using the above way means having to add a "-1" to every formula for a cell with only 1 char to be added.
Using the formula:
=SUM(RIGHT(E17,FIND("/",E17)-1))+SUM(RIGHT(E18,FIND("/",E18)-1)).....
View 2 Replies
View Related
Nov 19, 2009
I have a tracking sheet (attached) that has many functions, but I'm having trouble with two of them. First of all, I have a Worksheet_Change event set that when a cell is cleared, it fills the cell with a formula to use the record above it as a default value if another cell is equivalent. This worked when I first wrote it, but now it seems to break every other time I use it. When assigning the formula it returns a Method Default/FormulaR1C1/Offset failed error message. It seems to be different for each one, each time and I can't figure out what the problem is.
The other problem I'm having is that I wrote a BeforeDoubleClick event to expand or contract any given record, or series of records. this too worked when I initially wrote it, but now is only hiding one row when it should be hiding eight or more.
I'm not terribly versed in VBA and totally baffled as to why I'm having these problems. As I side note, any ideas to clean up any of the code and make this run smoother (as ther will be many more series added when complete).
View 5 Replies
View Related
Sep 24, 2012
I have a user defined function in one VBA module that I'd like to call from another module, so I would normaly scope it as "Public".
However, as I don't want it to be available to Excel as a worksheet function, I would also normally scope it as "Private"
Is there a way to have a function that is available to other VBA modules in the same project, but not to Excel as a worksheet function?
View 5 Replies
View Related
Sep 14, 2006
A most of time I'm using VLOOKUP function. I want to call specially this function by pressing custom button (w/o pressing "Insert Function" and choosing VLOOKUP)
View 4 Replies
View Related
Oct 9, 2007
when you type in a builtin function in the formula bar such as =DAY(), a small callout box appears below telling you the syntax - in this case "DAY(serial_number)". Is it possible to achieve this for a user defined function?
View 9 Replies
View Related
Sep 16, 2009
I have written a VBA program and using in Ms.Excel. The problem is when I try to write the VBA function through the function wizard it works but when I write the function in excel worksheet cell, it doesnt execute. I do not now the reason.
View 2 Replies
View Related
Oct 26, 2008
I am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
View 8 Replies
View Related
Nov 11, 2008
I'm comfortable with the IF statements in excel and not familir with many of the other functions available to me. I am trying to create a character calulator for Elder Scrolls III (Marrowind). So that a person may enter their race, ***, and other choices and their by calculating all starting stats. There are 10 races you can choose from and I can cover 9 of them with the if function (leaving one as if all other options are false). I would like to know if there is a better way such as a drop down list or some way to search an array or anything that would be better suited to search the race cell and return data if it's true. I'm running into the same probably with choosing the constalation (13 choices in this catagory).
I thought to split it two different data fields, by letting you choose from 4 in one cell and the other 9 in a different cell, but realized I don't know how to make it check two different cells for a choice to return it to the display cell without hitting the limitation of the 7 nested funcations in a forumla again.
View 3 Replies
View Related
Dec 23, 2011
I am using the COUNTA function which works great but I also have data that I dont want counted and do not know of the problem solver.
E.G
in B1 I have vlookup function thats brings back either "B", "C" or "M".
in c1 I have =IF(A1="C",B1,"")
Now, that tells me if the data is B or not. If it is, it says B If it isnt, its blank
Thats great but when im trying to count how many "B"'s there are, it counts the blanks as well!
View 4 Replies
View Related
Jan 3, 2012
I am using COUNTIF functions with Defined Name lists to quickly determine if a certain number is on a list. As a backdrop, I am using Chemical Abstract Service (CAS) numbers and attempting to somewhat streamline chemical approval for a small company. CAS numbers are often in the format of XX-XX-X with varied amounts of numbers. One of the defined lists however does not have dashes.
Thus, I am using cell B1 to enter the CAS# once and then for each list having a column to itself with an associated worksheet with a defined name list. Most of the columns have the function =B1 with the conditional formatting of =COUNTIF(definedname,BX) and formatted to turn red if the chemical is on the list. This is working for all of the columns except for the list that needs the dashes removed. For instance, CAS 64-67-1 is put in B1 and cell B5 has the formula =SUBSTITUTE(B1,"-","") which brings the number to 64671 which matches the number in my defined name list. However, the cell will not turn red. What am I missing?
View 9 Replies
View Related
Feb 18, 2013
I want a UDF; = OK (f1,f2) each argument being an alternative function. If f1 returns an error message then use f2. Should be easy but I cannot get it to work.
View 5 Replies
View Related
Jun 24, 2013
I have the following function:
=IF(AND(I17>=$I$1,O17>=$O$1,Q17>=$Q$1,F17
View 2 Replies
View Related
Feb 18, 2010
TPR, DISPLAY and FEATURE columns generate a rating based off of an IF function. In the Executed column, I need TPR, FEATURE, DISPLAY to be averaged together...BUT....In I want the average only include columns where there are numbers. For example in row one the eqn would be (1+3+2)/3, but in row 2 the eqn would be (1+1)/2...can I state an average function within an if function? Or what would be the best way to create an eqn for this?? I have thousands of rows to complete and doing it manually is not an option.
0- Did not meet expectations
1- Below expectations
2- Met expectations
3- Exceeded expectationsTPRDISPLAYFEATUREExecuted?Effective?Comments132Coming off of a Dec promotion113111111221
View 9 Replies
View Related
Oct 13, 2009
On sheet 1 I have a list of 1000 firstnames
On sheet 2 I have a list of 1000 emails,
I need a function that states If a cell in the email column contains a string or value from the names column, it will result in a true statement so that I can separate out the emails that have these peoples first names.
View 5 Replies
View Related
Dec 8, 2009
I am trying to return a TRUE or FALSE based on a date in a cell.
for example:
if cell A1 = 07/11/2009
I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.
I have tried stuff like:
=IF(A1=TODAY()-14,"True","False")
but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?
View 6 Replies
View Related
Jul 27, 2006
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
View 2 Replies
View Related
