Contains Function: Function That States If A Cell In The Email Column Contains A String Or Value From The Names Column

Oct 13, 2009

On sheet 1 I have a list of 1000 firstnames
On sheet 2 I have a list of 1000 emails,

I need a function that states If a cell in the email column contains a string or value from the names column, it will result in a true statement so that I can separate out the emails that have these peoples first names.

I am trying to write a formula that says if a name is in a column of names put a 1 otherwise put 0. Should be a simple If, match function. I have attached a simple example.....

I'm trying to get a VBA macro put together that would delete all the rows, throughout every sheet, and shift up wherever the cell in column A = "Delete Row" in a workbook I've made. In the below copy of the workbook you can see that a lot of the information from all the tables is linked to the topmost table on the 'Mix Detail Sheet'.

If the the Cell in column A is blank on that first table, its corresponding cells in tables throughout the workbook displays the words "Delete Row". I need the macro to delete the rows and shift everything up where this occurs.

Ideally I'd also like the macro to then delete the rows in that first table where the column A cells are blank.

I have a column of numbers, on which i would like to perform subtraction, in a way that the cell in the (i)th row will be subtracted from the one in the (i+x)th row, while x is a parameter that the user can change as he wishes.

My problem is how to refer to the cell address and still use this conditional reference... If anyone has an idea how to realize this calculation (which should be peanuts in Matlab, but apparently more problematic in Excel),

I want to find the minimum value of column A if there is anything greater than zero in column B. I tried this formula (simplified): MINIF(B2:B6,">"&0,A2:A6) And it gives me the # NAME? error

Is there a function to put in a new column to get the abbreviated year and month of a previous column in the same row???

Ex. Row A B C D 3/14/2007 5/16/2007 2007-3 2007-5

Instead of using the YEAR MONTH funcion for each row is there a universal function that I could designate to the whole column of C and D something like C=YEAR(A(row#))???

I have a formula in Cell A1. It tells me the cell location of the last number in column E. So, for example, I input the number 44 in cell e85, the value for cell A1 becomes $E$85.

Let's say I now put the value 33 in cell e86, now the value for A1 becomes $E$86.

I want to calculate the average of the values in column E, all the way from E1 to whatever is in A1.

Here's what I need: =AVERAGE(E1:<whatever is in A1, like $E$85>)

How do I write the AVERAGE formula to make this work?

i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".

I have a list of names in the A column of the sheet. I wish to use the input string, a new name, of a vba box to insert into the column of existing names in alphabetical order by inserting an entire row, which I suspect will be the case anyway. Also 'Return' key doesn't seem to be inserting a CR on the page that I typed this request upon.

I made a quick little spreadsheet that explains what I am trying to accomplish. Basically I need to search a column for a known number, when it is found, I need to look at another column on that row, and if the cell is a specific item , count it.

Let's say I have a dataset with blank or X in column A, and a dollar value in column B. I want to sum the dollar amounts for column B only if there is a corresponding X in that row in column A. The way I currently do that is by creating a new column C, making a if statement to display the value of B only if there is an entry in A, and then doing operations on that new range. I figure there has to be an easier way. I don't know how to use VLOOKUP, despite trying to read the helpme a bunch of times. Is that relevant?

use the VLOOKUP function when the column I need to search is not column A?

I have a Workbook with two worksheets in it and in Sheet 1 I have 10 columns of various text and numbers. In cell A1 of sheet 2 I will fill with a certain code that appears in column E in Sheet 1. The result I would be looking for should come from Column A in Sheet 1. I thought that the following would work copied into B1 of Sheet 2 but it doesn't appear to - =VLOOKUP($A1,'Sheet 1'!E$1:$E$481,1,FALSE).

The following concatenate function was working, then mysteriously stopped. When working it returned the data that I requested, now if I click on any concatenated cell and hit enter I get the function string, see below.

InputData is my tab that is being referenced. All other functions/formulas are working as designed. The data in the referenced cells is still there and I changed from text to number to general, etc but I still get the same result.

I am trying to put text form 3 cells into 1 string. I got the 1st 2 but the 3rd I only want to extra the first part of the cell up to the 1st comma. This is what i have so far:

[Code] ......

For example cell E81 would contain "abc, def, ghi" . I want to add to the string above only "abc" and not the entire cell content.

I am trying to use the sumifs function to add a column that is in pounds but with multiple criteria.I am trying to add a price field but between two dates (between the beginning and end of each month) another criteria from a range of cells I have copied the formula I have written below

try to explain a little column K is the column I need to sum column B is the date field that I need to extract i.e. 1st to 31st January (I have put these dates in a cell that correspond to I17 and J17)

then the last bit column W is another criteria that I need met, this works for just one cell however if I try to add another criteria in another cell it doesn't work after M17 I add to the formula ,Sheet1!W:W,"="&M18)

I have a column which has either EDC or EDT in it, can I add a function to this column which says 'if EDC then output Eau De Toilette' and then Eau De Toilette get's ouputted into a seperate column? Is this kind of thing even possible in Excel?

How do I setup a COUNTIF function so that it 'searches/uses' more than one column for results.

Example: I have a spreadsheet with 20 columns - starting at A1 to T1 - and ending at A100 toT100. I want to use the COUNTIF function to 'search' all of these from A1/T1 to A100/T100 and tell me how many times the number 21 appears across that range of cells.

This COUNTIF function will reference data on a sheet called 50 - so at the moment my current single colum COUNTIF looks like this -=COUNTIF('50'!A1:A100,21) - and it works fine for one colum, but I need to search 20 columns.

I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.

For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.

I have attached a sample worksheet that provides some examples.

Let's say I have data that looks like this grid below. Each color represents a column heading and each number is a data point within that column.

Blue Red Green Yellow 18 27 15 36 56 41 3 22

Can I write a formula that would do the following 2 things with the data in this format:

1. Find the max of the data...simple =Max(...) formula 2. Use the max to return the column heading. In this case the max is 56 so the value I want to return is "Blue"

I have a spreadsheet where columns I through V are date fields (stored as text as some have letters after the date). Is there a way that I could write a formula so that Excel returns the column letter of the last cell without a letter at the end of it? So it kind of looks like this:

I J K L M 05/01/2014 05/15/2014 05/30/2014(p) 06/20/2014(p) (null)

What I want in the column with the formula then would be just the letter J. Is this even do-able?

I have column A with 1000 cells tall with a bunch of random whole numbers from 1-100. In cell B1 I enter the formula:

=MATCH(25,A1:A1000,0)

This goes through the data and outputs the location of the first instance of "25". However my data has 8 instances of "25", and I want to know all of them. So basically in B2, B3, B4, ... I want to enter:

I have a huge worksheet that contains four character payer code in column D for example: 9081, M897, 0235. I am looking for a function that will show the result in column AD

IF payer code in column D starts with a 9 (9???) - GOVT IF payer code in column D starts with a 7 (7???) or M (M???) - MNGD IF payer code in column D starts with a 2 or 0 (zero) – COMM IF payer code in column D starts with either Z, I, C - PTR

I got two data in B contain names and in C contain numbers, in other cell I want to have a function that can calculate which in C that have max number and display the name from B.

I've been trying to find this on the web but haven't a clue now, I have a database query that I am pulling from an access database and now I am trying to match the last four characters of a referral string to a current location, let me show you what I mean. Example,

A(location string) B(current location) C(last location) car/kitchen/house kitchen NO kitchen/garage/car car YES kitchen/car/garage car NO

I want to write a function in column C that matches the last four characters of the location string (column A) with the current location (column B) , and if they match have a YES in column C, or a conversely a NO.

I want to use TextToColumn function of excel using vba. I tried recording a macro to get the syntax and then make a few changes to it; But it is not working when i run it from vba ... if i do it manually it is working very nicely but it just skips that step in vba.

i have pasted my code

Code: On Error Resume Next rngReqIDcodWhole.TextToColumns Destination:=rngReqIDcodWhole, DataType:=xlDelimited, _ TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=False, _ Semicolon:=False, Comma:=False, Space:=False, Other:="""", FieldInfo _ :=Array(1, 2), TrailingMinusNumbers:=True rngReqIDcodWhole is a column range

the text that the code needs to break is as follows