If Sheets("Workings").Cells(ExceptionCount, ColumnCount + 3).Value = 1 Then
Sheets("Allocations").Range(.Cells(ABIndex + 5 + week, (ColumnCount * 7) - 5), .Cells(ABIndex + 5 + week, ColumnCount * 7)).Value = ""
Else
End If
I know the If statement is working, but for some reason I can't fathom the line that removes the cell contents does nothing. I have tried ending with .ClearContents rather than .Value but that doesn't work either.
I have a spreadsheet ranging from A1 to AH602 Column AH contains row totals and Row 602 contains colunm totals. I am importing a CVS file starting at cell A4 - the number of rows contained in the import varies drastically. I would like to build a macro that would remove all the unused rows. I have tried to record a macro that would do this but the number of rows always ends up static and not variable.
What I'm doing below is Using an END+HOME to take me to the furthest point in the active range then 3 UP ARROWS to get to the desired row then an END+LEFT ARROW followed by END+UP ARROW and 2 DOWN ARROWS to get to the starting cell in Column A. At that point I use a SHIFT+END+DOWN ARROW to capture the range of Rows I need to delete.
Sub Macro1() ActiveCell.SpecialCells(xlLastCell).Select Range("AH599").Select Selection.End(xlToLeft).Select Selection.End(xlUp).Select Range("A101").Select Range(Selection, Selection.End(xlDown)).Select Selection.EntireRow.Delete End Sub
This works except that the starting cell remains the static.
The gaps are of varying length. So far I have been playing with the Range("a1").Select ActiveCell.Offset(1, 0).Select Do While Not IsEmpty(ActiveCell) 'do copy action ActiveCell.Offset(1, 0).Select Loop of course, this stops when it reaches a blank cell.
I think the best way to do it is if I set a range, and then get excel to go down the column and copy whereever there is cell content.
I am using VBA to create a word document (.docx). This word document contains plain text content controls as well as picture content controls. I then use VBA to automatically select a picture based on the code below
Code: Set oCC = Word.ActiveDocument.SelectContentControlsByTitle("TabPic").Item(1) On Error GoTo TabErrorHandler oCC.Range.InlineShapes.AddPicture Filename:="X:XFERANDREW-TDCD " & LblVL &
[Code].....
After the document has been closed down I try to open it again and I am told "The file cannot be opened because there are problems with the contents."
When I click details it says "Unspecified error" and "Location: Part: /word/document.xml, Line: 2, Column: 0"
If I click ok it says "Word found unreadable content in "". Do you want to recover the contents of this document? If you turst the source of this document, click Yes.
Clicking Yes opens the document with all the contents and it is now renamed to Document 1. If I click no it does not open.
I use this to read cell content, add some text/characters (ie. [ and ]) and change the properties of the complete cell
Sub COMMENT() Worksheets("DVD Lijssie").Activate If ActiveCell.Value 0 Then ' Change all in to ... ... ... ActiveCell.FormulaR1C1 = ActiveCell.Value & " " & "]" & " " & "[" With ActiveCell.Font .Name = "Arial Narrow" .Size = 8 .ColorIndex = 16 End With End If End Sub HOW can I change this vba-code so it leave's the content of the cell like it is and add some content with the use of let's say TexBox1 and ONLY use different font properties for the newely added content?
I am currently working on writing a macro that clears all rows in which the cell in column F doesn't say "Sale", "Purchase", or "Tax Code Description", however, I keep receiving an error that says "Wrong number of arguments or invalid property assignment".
[Code] .....
Also, I originally was deleting the rows, but I have formula's pulling from this tab and need them to not lose their reference after the macro executes.
Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
how to pass a cell content into a formula as a named range? For instance, I have 3 named range (Budget, Actual, Forecast) and I use the named range in vlookup formulas. But instead of using the named range in the formula directly, I want to refer to a cell where I can type in which named range I want to use. Can this be done? I am attaching a sample spreadsheet to clarify what I mean.
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then On Error Resume Next Application.EnableEvents = False If IsEmpty(Target) Then Target.Value = "Yes" Else Target.ClearContents End If Application.EnableEvents = True On Error Goto 0 End If
I have cells where the formual is this: =D17/SUM(D17:E17). The result is always going to be a three-digit decimal, less than 1. .546 .345 .678 etc. Excel, of course, places a zero in the front: 0.546 0.345 etc. Is there a way to remove this?
I have about 80K (80 thousands) entries.Each entry starts with #000. I want to remove "#" sign and zeros as well.I had used "LEFT " function but problem is that some numbers have 3 zeros in the start and some have have 4 or 2 or one zero. I tried to do it manually but it proved a gigantic task and been unable to complete it.
The few examples of entries are as under. #0001234 #000001897 #034567 #00671234
I have received an excel spreadsheet that only has 23 columns. The sheet is not protected, the columns are not hidden, the columns are not shrunk to .01 millimetres, the columns are quite simply not there. How is this possible to do? Columns displayed are a through to W. If I delete a column the columns display only a through to v.
I got three columns in excel. Column A is a list of items, so is column C. Column B displays the similarity in the 2 lists.
I use the following command =IF(ISERROR(MATCH(A1,$C$1:$C$265,0)),"",A1).
SO: A B C
Cat Fish Dog Dog Roll Bull Carpet Apple Dog
But what I want to do is the following:
If I have "D-og 12 2-3" in column A and say "do g 1 22/3" in column C, I want it to be displayed in column B. To do that I need to decapitalise and remove all the special symbols such as space, ), (, *, &, ^, %, $, #, @,! etc.
So I get dog1223 in column B since they are the same.
I am trying to print this document but when I print it, there appears a gap between the bottom of the page and the object at the bottom of the page. I have attached the word file (soft copy) as well as the clarification page.
If both conditions are satisfied then the formula applies 2000 $ recruitment charges , else it is 0 (zero)
While it returns 2000 as true value where it is required, for rest of the cells it returns value "FALSE", which I dont want to see. I need to see 0 (ZERO). I am confused , as to how this can be achieved.
I have some password protected excel worksheets that required editing as they are from earlier versions, an earlier time and all need to be updated. This would be fine if it was myself who actually made the worksheets, but the person who did retired a couple of years ago and has dropped off the map (no contact details etc).
I know how to remove passwords, when I was the one who set them. The big problem here is, they are all macro enabled and for some reason the free down load password removal applications do not unlock worksheets that are macro enabled.
someone show me how to change formula values. i am limited on information i can enter.i tried filling entire area with data to perhaps get a gradual movement down from 27-28 . how do i edit the formula to read 5 to 200 instead of 5-27
I need a macro, preferably a "sub" that will search a long text input and when it finds the first instance of the letters "GSH" in that order removing all previous text before it. The amount of text characters, letters, and order before the gsh will vary.
I have a cell with text in. I need a formula that will remove the characters "Age" from that cell and return the text without thoser characters. eg. Cell A1 = "What is the age we live in?" I need a formula to put in A2 so that it reads:"What is the we live in?"
I'm creating some workbooks from PDF files. After converting, some of the values in column A get placed into column B along w/it's values. Column A should have only a 6 digit number. Column B may have a combination of numbers and letters, but more use of letters.
I'm trying to create a formula for that will remove the 6 digit number at the front of my text values if it is present in column b. If it is not, than the column should remain the same. Is there a way to say remove first six values from left if values are numbers? The results should out put to sheet 2.
