Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
View 2 RepliesI am trying to do some thing simple, but i causes me a lot of problem in several areas. I am using the
sheets( range("c5")).select
to simply select the sheet that is named in cell c5 on the current sheet. can anyone give me a correct way to accomplish this that I can use in other applications that i come accross?
I want to select and clear a part of a sheet.
here is what I have.
Sub clear_data()
sheets("sheet1").select
lr = activesheet.usedrange.rows.count
Here is where I get lost in translation (syntax).
I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.
I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I have a row stored in the variable Found_Row3 and I want to set the variable ACRow to all colomns from A to Z of that row. Below is what I have so far...not working
[Code] .....
I RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
I have a worksheet with a block of data. The size of this block changes.
I am calculating and storing the upperleft and lower right cell position of the block in say cells AA3 and AB3 on the same worksheet.
So far I have everything working fine.
Now I want to create a button to trigger a macro to sort that block.
I can figure out the button and make it trigger a macro.
One of the lines in the macro is
On my userform I have 20 comment icons (imported pictures), that when clicked need to bring up an InputBox for the user to add a comment, and store that comment in a Public variable specific to that comment which will later be written to the spreadsheet.
To keep it simple, lets say I have two comment icons to click, one to add comments to the "Testing Completed?" field, and one to add to the "Sign-Off?" field.
The first comment icon is named TestCompIcon, the second is SignOffIcon, and the public variables they write to are called TestCompComment and SignOffComment respectively.
To avoid having to code the InputBox procedure for every comment icon on the userform, I was hoping that upon click, the icon would call a centralized routine that would establish the name of the variable that needs to be written based on the name of the icon comment that was clicked. Something like as follows:...............
I have a worksheet whereby many of the rows are hidden. These rows were initialy hidden by means of scipts ( I have numerous scripts to hide data under various criteria) eg: Scripts which hide rows based on cell count, cell color, cell data information etc...
Now that I am able to veiw only the information that i want to see.. is it possible to create a script which selects cells only from rows which are visible? I have created a Named range begining from E:12 to G:500 called "Select_EFG"
Uing the example below, how could I select the cell data from the visible rows (12, 30, 34, 35, 50 etc... up to row 500.) from this Named Range (columns E:12, G:500) .... and paste this information in Sheet 2 Row5 columnC
........A,B,C,D,E,F,G,
Row
12
30
34
35
50
57
59
100
140
400
490
500
Here is what I would like to do: Have a formula like Max(B12:B14) change to Max(B12:B18) when I change the value in different cell from 3 to 7. I would like to stay away from the macro world and keep in formula world if that is possible.
View 6 Replies View RelatedI'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result.
For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z).
The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
Basically I need a bit of VB to find the last cell in column F with text in it (is it End(xlUp)??) and then apply full borders from that cell up to cell Q5. A test macro tells me the border bit is as follows, so just need defining the range.
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.ColorIndex = 0
.TintAndShade = 0
[Code] ......
I know how to do Range("A" & I).Select, but how about if I want columns A thru E instead?
View 7 Replies View RelatedI am doing is setting a variable called eof to the number of rows (with text) and i just want to select columns A1 - G1 and the eof range!
Dim eof As Integer
With Sheets("Coverage Count (%)")
eof = .Range("G65536").End(xlUp).Row
'crashes on the .select
.Range("A1:G1" & eof).Select
Selection.Sort Key1:=Range("G2"), Order1:=xlDescending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End With
I've done this before and I could have sworn this worked...but i must be missing something.
This one should be easy but I keep running into the same wall.
On every page I have single cell defined name range based on the sheet name & "_startcell"
So on sheet MfgReq I have cell A3 defined as name range "MfgReq_startcell".
I would like to the following:
.clearcontent using the "MfgReq_startcell" as the upper most left cell, all the columns to the right, and all the rows down.
on this sheet it might be 5 columns wide by 4000 row & on another sheet it might be 50 columns wide by 50000 rows.
I am trying to create a command button on my userform that will allow me to print all the records in the worksheet....in other words it should only print the rows with data......
*my worksheet is called "complaintData" - this is hidden and not active sheet.
*I have columns A to J with information, with heading from A1:J1.
*I want to be able to print all the rows with values in column A. (Not all the columns except "A", will have values for every record....some may be blank for some records...
*I want all the columns to fit in in one page with headings (A1:J1) being first row on every new page.....
*page setup should be landscape...
I have tried a few codes from this forum, but not sure where I have goofed up....am still trying learn VBA.....would appreciate if anyone can fix this code for me....cheers
Private Sub cmdPrint_Click()
Sheets("ComplaintData").Visible = False
Dim ws As Worksheet
Set ws = Worksheets("complaintdata")
I have tried various syntaxes but nothing is working for me. I am using XL 2000 so it doesn't have the relative address function in the macro! So here is what I have
ActiveCell.Range("A1").Select
ActiveCell.R1C1
Range("R1C1:R1C85").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues
Application. ScreenUpdating = True
Range("A1").Select
I need to be able to select from the originating cell which will always be in "T" Col thru to "CZ" col but will be on different rows.
I download some data from a commercial real estate site about properties and their owners and process it in Excel. Out of 1,000 records, maybe 20 or so will have the data end up in the wrong fields. This is an artifact of the data source the commercial site uses.
Anyway, what I need to do is to get the data back in the right fields. So, I sort the data to pull together at the top of the sheet all the records with data where it's not supposed to be. So far, so good.
Now from one data download to another the number of records which end up in the sort will be different. And, here's the problem.
I try to record a macro mimicking my selection of the range of the data that needs to be moved. Fine, no problem. And, on the same dataset it works like a charm. But as soon as I put a different dataset into the spreadsheet with a different number of records that need to be corrected the macro fails.
Apparently, this is because the macro has been defined with a certain range of cells selected in the first data set and this same range is used for subsequent datasets with different numbers of errant records.
Basically, what I'm trying to record in a macro is the Shift/Control End and Shift/control arrow commands. But they don't record as such.
I need to select data from columns A, B and I for the graph. I have the below code but get an error message. Can anybody help ?
Set cellGR1 = Cells(2, 1)
Set cellGR2 = Cells(K, 2)
Set cellGR3 = Cells(2, 10)
Set cellGR4 = Cells(K, 10)
Charts.Add ....
I want to select the variable range somewhere in the middle of the sheet from where the 2nd instance of cell named "real cost" is, down to the next blank row (select the area without the blank row), so that I could copy it to another sheet.....
View 6 Replies View RelatedI have a named range (D:16 F:800) called “NameRange” which contains names.
I’d like to create a macro which offsets a letter “x”, 10 columns to the right everywhere that name appears within the range. As an example: If I’m trying to find the name Tom, A dropdown menu shows the name “Tom” ( which I’ve created) whereby it calls upon a script to search within the named range from this:
Bob Kim Tom
Tom Sue
Mary Bill Ted
Tom Sue Bob
Fred Bill Sue
Bob Tom Kim
and offset “x” to look like this:.......
I'm trying to obtain a result based on the number of characters in a cell. If the cell content is blank or contains 9 digits then leave blank.
Any other result must provide the outcome of "incorrect number supplied".
I've tried the following formula but it doesn't work.
I am trying to search the cells in Column A around rows 54 to 77. And if the cell says "Yes" it should hide the row. I think I'm on the right track, but can't seem to get it work.
[Code] .....
I am working on a spread sheet for work were we have to test certain items on certain days, e.g. one item needs to be tested every Tuesday & Thursday, when the test is completed you click on a drop down box and click on completed or in progress.
What I would like are a couple of things to happen as follows:
A message box would pop up when you open the file to inform the employee that the test is due today only on Tuesday & Thursday if not completed or in progress from the drop down box. Once you select completed or in progress from the drop down box the message box no longer appears. Every Tuesday & Thursday when it's first open it deletes the cell content, thus triggering the message box test is due today, and once completed or in progress it no longer appears until next Tuesday or Thursday.
The spread sheet is on shared drive and used by several users, let's just say cell A1 is the cell I have the drop down box
I have a drop down list made from the Forms toolbar with a list of items: 1, 2, 3, 4, 5. I have set it with a linked cell, so when you choose, say 3, from the dropdown, 3 appears in B10.
I was hoping to add a 'Go' button, which would run another macro depending on what is in B10, i.e. so if 3 was chosen, then you press 'Go', Macro3 would be run.
So I have 5 macros called Macro1 - Macro5, and I need some code for the 'Go' button which will run the right macro depending on what number is in cell B10.
Column"A" on spreadsheet has list of unique Order Numbers. The orders are whole numbers with no letters or characters.
I want Columns B:J in each row to be a "named" range using the content in Col A as the range name.
So if A5 says "12345" I want b5:J5 to be named "12345".
I am working on developing QR Codes using some MATLAB code and it would be really convenient if I could create an excel program which changed the background color of a cell containing a 1 to black and a cell containing a 0 to white.
View 2 Replies View RelatedI am currently trying to create a spreadsheet whereby if I enter certain text in a cell in Column A on worksheet 1 that correlates with text in a cell in Column A on Worksheet 2, then the description in Column B in Worksheet 2 is entered into Column B on worksheet 1.
For example, if worksheet 2 has the following:
Column A Column B
XXXX PRODUCT 1
YYYY PRODUCT 2
and I enter XXXX in column A on worksheet 1, I want Column B on worksheet 1 to automatically enter PRODUCT 1.
multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?