Column"A" on spreadsheet has list of unique Order Numbers. The orders are whole numbers with no letters or characters.
I want Columns B:J in each row to be a "named" range using the content in Col A as the range name.
So if A5 says "12345" I want b5:J5 to be named "12345".
I have need of VBA code that will check collumn D, starting at cell 7 until cell 206, for when data that is entered starts with 100. When this occurs it will remove all of the data in that same cell except for the last 12 digits.
Here's an example.
When using our barcode scanner to capture a FedEx Tracking number the barcode captures the following:
1001853514360009020200802541997796.
Embedded in that long string of numbers (which are formatted as Text) is the tracking number. Specifically the last 12 numbers are the tracking number. However, FedEx varies this code at times so the last 12 numbers are the tracking number only with the raw data captured by the scanner starts with 100. Until I find additional conditions this VBA code will have to ignore all of data that is captured in collumn D starting at cell 7 until 206.
I am having some trouble writing a macro to delete cell content. I know which cells I want to clear, but I can't seem to get the macro to do it.
I also want to have something in the macro that inserts data into the lines that I am trying to clear. I want cell A67 to say "Payment" and cell A71 to say "Total."This is the code I am using:
Sub DeleteCell()
Dim i As Integer
For i = 67 To 71
If Range("A" & i).Value = "--" Then
Range("A" & i).Delete
Next i
End Sub
I have a worksheet that contains two basic columns of data, A and B. What I would like to do is based on the value in column A, I would like to copy the contents of column B to a textfile (preserving the basic line structure and hopefully without any extra characters like quotation marks attached). So for all the values in column A = 'Account', Id like to take all the corresponding values in Column E (for example) and save them to the same file, preferably where the filename itself as 'Account.xyz'. And I would like to do this for all unique values in Column A, that is do it for 'Account' and 'AccountPrivilege' etc. Note Column A is essentially presorted alphabetically already. There are actually 1000s of rows with hundreds of unique A values so Id like to find a way to automate this process.
A
B
1
Account
Company Information
2
Account
Company
[Code] ........
I have a row (will always be row 3) where each cell contains a day of the week, the days repeats for a year or so, making the row almost 400 cells.
Like this,
Mo - Tu - We - Th - Fr - Sa - Su - Mo - Tu - We - Th - Fr - Sa - Su - and so on...
Though, A3 doesn't have to be "Mo" because the days in this case can change (A3 can start with "Tu"), hence I think I need a macro.
So if this row contains a weekend, "Sa or "Su" I want all the cells in the column beneath that which contains a specific value to be cleared.
Example, if "Sa" or "Su" has 3 values in the columns under them, all the values that contain "X" or "Y" has to be cleared.
Like this:
Rows (1,2,3...,)
1----
2----
3 Mo - Tu - We - Th - Fr - Sa - Su - .. and so on..
4 A --- B --- X --- Y --- X --- B --- Y
5 A --- B --- X --- Y --- X --- X --- X
6 A --- B --- X --- Y - --X --- Y --- C
After the macro it should be:
1----
2----
3 Mo - Tu - We - Th - Fr - Sa - Su
4 A --- B --- X --- Y --- X --- B ---
5 A --- B --- X --- Y --- X --- ---
6 A --- B --- X --- Y - --X --- --- C
Notice the two examples in the excel file.
Excelforum.xlsx
I'm trying to use the below formula to to return "true" when text in cell (M2) matches text in selected cells on same row (A2, E2, and G2)
However, all formulas I found online that serve this purpose deal with cell range only, not predetermined cells with exclusions.
Formula:
=IF(ISNUMBER(MATCH(M2,A2:G2,0),TRUE,FALSE) (This will match all cells between A2 and G2 against M2)
reforming this formula to match selected cells only in-between that range (A2, E2 and G2)?
Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
View 2 Replies View Relatedhow to pass a cell content into a formula as a named range? For instance, I have 3 named range (Budget, Actual, Forecast) and I use the named range in vlookup formulas. But instead of using the named range in the formula directly, I want to refer to a cell where I can type in which named range I want to use. Can this be done? I am attaching a sample spreadsheet to clarify what I mean.
View 6 Replies View RelatedLooking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
I use this to read cell content, add some text/characters (ie. [ and ]) and change the properties of the complete cell
Sub COMMENT()
Worksheets("DVD Lijssie").Activate
If ActiveCell.Value 0 Then ' Change all in to ... ... ...
ActiveCell.FormulaR1C1 = ActiveCell.Value & " " & "]" & " " & "["
With ActiveCell.Font
.Name = "Arial Narrow"
.Size = 8
.ColorIndex = 16
End With
End If
End Sub
HOW can I change this vba-code so it leave's the content of the cell like it is and add some content with the use of let's say TexBox1 and ONLY use different font properties for the newely added content?
i had to change the color of cell to yellow if the cell content is "N/A"
i had write few lines but don't know how to move in a range cell by cell
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If
End Sub
Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedLooking to create a calendar in excel and auto-populate the content with specific fields I enter. I know how to create an excel gantt chart but I'm really looking for a calendar view instead of a series of columns with dates. I reviewed the original post on Auto-Populating Excel Calendar but was confused by the instructions. (1) create a calendar in excel and (2) show me how to populate the calendar with fields like (dept and project name) into the dates on the calendar? I have two dates that are important (a due date for the project and when that project will be published). Is there a way to have both dates show info otherwise the most important date will be the publish date?
View 1 Replies View RelatedFor a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.
ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I am designing a form that tracks call times. I have a control "cmdStart" that when clicked will enter the "Start" time in cell A4 and each time clicked will skip a column and enter the next time in cell C4. The same for a control "cmdEnd" that will enter the "End" time in cell B4 when clicked. Then the next end time clicked will go in cell D4. However, when the Start time enters the time in AE4 I need the next start time to start in A6 and do the same in this row until AE6 and then drop down again. The same with the "End" time when it reaches AF6. I think I could write the If and Else for each individual cell, but there must be a more efficient way to do this.
View 4 Replies View RelatedI am currently using the .resize function to give a specific value to each cell within a range.
First of all, is it the most efficient way to do it?
If so, why am I getting error "Application-defined or object-defined error"
with this code :
Code:
ThisWorkbook.Sheets("Merge").Range(Cells(3, 2), Cells(4000, 2)).Resize.Value = "TEST"
I have a timeline in tab 1. I want to copy a specific cell range from tab 1 to tab 2 but when I make an edit to tab 1, I want it to show up on tab 2 automatically. I believe that's cell referencing but how do I reference an entire range?
View 1 Replies View RelatedI am half way through a Worksheet where I am using VBA to perform more than the measly 3 Conditional formats that excel offer. This is working fine but I am now looking into a way of reversing the formats if a mistake is made and the condition is removed.
To make this sound more straightforward it is a rota sheet. If I enter Holiday the cells interior turns pink, Half turns light blue, On Call turns green etc. If this is changed I need to change it back to the original formatting.
I have partly done this with a Case "" but the Rota changes colour with different teams so I need to have an IF statement in there that say if the Target Cell falls within this Range say A5:AF10 change to tan IF the target falls within A6:Af20 change to sky blue etc. Below is the code I have so far.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim WatchRange As Range
Dim CellVal As String
On Error Resume Next
CellVal = Target
Set WatchRange = Range("A1:AF100")
If Not Intersect(Target, WatchRange) Is Nothing Then
Select Case CellVal
Case "Holiday"
Target.FormatConditions.Delete
Target.Interior.ColorIndex = 38
Target.Font.ColorIndex = 1......................
I have a macro assigned to a button that saves the worksheet as a PDF in a certain folder, but what I cant do is make the Macro look at a certain cell to save the file as a specific batch number.
This is the macro I have so far, I want the macro to do as below but to also look at cell L3 in the same worksheet and save it as the number what is in that cell.
[Code] ......
I need in some way to make the range variable, because it can change. I need only the first range to be different.
Code:
x = .Range("a4:a27").CurrentRegion.Value
A4 have to be instead the cell where Denmark typed. Column A
And
A27 have to be the lasted used cell in column B
But after the row where it have found Denmark.
Please have a look.
Below code is from AB33, But this is not a cross post.
Different question
Code:
Sub copyp()
' Denmark
Application.ScreenUpdating = 0
Dim cell As Range, i&, dic
With Worksheets("Middle Result")
x = .Range("a4:a27").CurrentRegion.Value
[Code] .......
I have a table that has a number of new starters and corresponding appointments offered, what I originally required was to lookup the chronological date after the new start date.
However this has now been scuppered by my boss who has requested that not only lookup the date, but also add who the appointment is with, but if I do this the first array formula stops working and to tell the trust I'm not to sure how to do it anyway.
I am looking for a formula that will enable me to determine which one out of five thresholds a percentage falls within and the retuns a specific value for the corresponding threshold. Here is an example of the data (only showing three thresholds):
_____A________B_________C____
1 ___0.0%_____50%_____$5.00
2 ___51%______75%_____$15.00
3 ___76%_____100% ____$25.00
Where the values in A1 and B1 are the low and high ends of one range. I would like the formula to determine which range the value falls within and return the value in collumn C (C1 for the A1:B1 range).
I can do this using multiple 'if' statements, but am looking for a much more streamlined way to determine the proper value in column C.
I need to keep track of tardy occurences, but I only have to consider occurrences that have occurred in the past six months from the current day. Column A contains the names of the employees, Column C thru IV contains daily dates beginning with 1/1/2007. Column B contains a CountIf function to count the number of times T appears in columns c - iv.
View 9 Replies View RelatedI am looking for VB code that will format a range of cells from a number format to a percentage format based on a reference cell. The reference cell is a drop down created from a list validation.
For example: If the reference cell (cell A1) =1 then cell range B2:C4 would be a number format. If A1 = 2 then cell range B2:C4 would be a percentage format.
I have searched for hours trying to find a relevant thread; I know they are out there, maybe I just wasn't typing in the correct search words.
what is wrong witht his code?
If Sheets("Workings").Cells(ExceptionCount, ColumnCount + 3).Value = 1 Then
Sheets("Allocations").Range(.Cells(ABIndex + 5 + week, (ColumnCount * 7) - 5), .Cells(ABIndex + 5 + week, ColumnCount * 7)).Value = ""
Else
End If
I know the If statement is working, but for some reason I can't fathom the line that removes the cell contents does nothing. I have tried ending with .ClearContents rather than .Value but that doesn't work either.
I am trying to write a macro that goes down column A, and whereever there is cell content, it will copy the row of the table to another spreadsheet.
The problem I am encounting is that there are gaps in the table, for example:
WKJ9900KBKBusiness Banking: Cheque CollectedWBJ90978JKCommercial Banking Corporate Heritage: Cheque CollectedUHN98920HJCorporate: Cheque CollectedUCC1201DBKCredit Cards: Cheque Collected
WHH8989JKBusiness Banking: Cheque Collected Unidentified / ReconciliationWKU8987GHCommercial Banking Corporate Heritage: Cheque Collected Unidentified / Reconciliation
WKJ9900KBKBusiness Banking: Cheque CollectedWBJ90978JKCommercial Banking Corporate Heritage: Cheque CollectedUHN98920HJCorporate: Cheque CollectedUCC1201DBKCredit Cards: Cheque Collected.
The gaps are of varying length. So far I have been playing with the
Range("a1").Select
ActiveCell.Offset(1, 0).Select
Do While Not IsEmpty(ActiveCell)
'do copy action
ActiveCell.Offset(1, 0).Select
Loop
of course, this stops when it reaches a blank cell.
I think the best way to do it is if I set a range, and then get excel to go down the column and copy whereever there is cell content.
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies View Related