Removal Of False Message?
Nov 7, 2013
I have a spreadsheet that contains certain formulas based on constants stored in another sheet. I have created this formula now which goes like this
=IF(C3=Staff_Profile!$C$5,IF(Staff_Profile!$C$2="Expat",2000," "))
The above formula work on two conditions :
1) the staff has joined in a particular month
AND
2) the staff profile is "Expat"
If both conditions are satisfied then the formula applies 2000 $ recruitment charges , else it is 0 (zero)
While it returns 2000 as true value where it is required, for rest of the cells it returns value "FALSE", which I dont want to see. I need to see 0 (ZERO). I am confused , as to how this can be achieved.
View 6 Replies
ADVERTISEMENT
Apr 23, 2014
I have a table arranged by columns into SETS of results. I am looking for a way to mark all the columns of a set as false if any one column of the set is false.
View 4 Replies
View Related
Nov 15, 2006
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies
View Related
Dec 13, 2008
I have cells where the formual is this: =D17/SUM(D17:E17). The result is always going to be a three-digit decimal, less than 1. .546 .345 .678 etc. Excel, of course, places a zero in the front: 0.546 0.345 etc. Is there a way to remove this?
View 5 Replies
View Related
Jan 30, 2009
I have just started playing around with events etc and i was trying to reomve the command bar using the code below in module 1.
View 4 Replies
View Related
Jun 7, 2014
I have about 80K (80 thousands) entries.Each entry starts with #000. I want to remove "#" sign and zeros as well.I had used "LEFT " function but problem is that some numbers have 3 zeros in the start and some have have 4 or 2 or one zero. I tried to do it manually but it proved a gigantic task and been unable to complete it.
The few examples of entries are as under.
#0001234
#000001897
#034567
#00671234
View 5 Replies
View Related
Aug 8, 2006
Assume cell A1 contains a set of words. If cell B1 contained the following formula, the contents of cell A1 will be shown in B1, minus the last word.
=If(ISNUMBER( FIND(" ",A1)),LEFT(A1, LOOKUP(32768,FIND(" ",A1,ROW(INDIRECT("1:"&LEN(A1)))))),A1)
However, the space or gap before the word that has been removed will be present in cell B1.
eg. If A1 = "how are you", then B1 will = "how are ".
I need this space to be removed too.
ie. B1 = "how are"
View 5 Replies
View Related
Dec 11, 2008
I have received an excel spreadsheet that only has 23 columns. The sheet is not protected, the columns are not hidden, the columns are not shrunk to .01 millimetres, the columns are quite simply not there. How is this possible to do? Columns displayed are a through to W. If I delete a column the columns display only a through to v.
View 7 Replies
View Related
May 27, 2009
I got three columns in excel. Column A is a list of items, so is column C. Column B displays the similarity in the 2 lists.
I use the following command =IF(ISERROR(MATCH(A1,$C$1:$C$265,0)),"",A1).
SO:
A B C
Cat Fish
Dog Dog Roll
Bull Carpet
Apple Dog
But what I want to do is the following:
If I have "D-og 12 2-3" in column A and say "do g 1 22/3" in column C, I want it to be displayed in column B. To do that I need to decapitalise and remove all the special symbols such as space, ), (, *, &, ^, %, $, #, @,! etc.
So I get dog1223 in column B since they are the same.
View 9 Replies
View Related
Jul 8, 2013
I am trying to print this document but when I print it, there appears a gap between the bottom of the page and the object at the bottom of the page. I have attached the word file (soft copy) as well as the clarification page.
Attached Files: letter head.pdf
Doc2.docx
View 1 Replies
View Related
Jul 3, 2013
I have some password protected excel worksheets that required editing as they are from earlier versions, an earlier time and all need to be updated. This would be fine if it was myself who actually made the worksheets, but the person who did retired a couple of years ago and has dropped off the map (no contact details etc).
I know how to remove passwords, when I was the one who set them. The big problem here is, they are all macro enabled and for some reason the free down load password removal applications do not unlock worksheets that are macro enabled.
View 1 Replies
View Related
May 6, 2009
Just wondering if any one can help me come up with some code to remove some lap time in my document ....
View 14 Replies
View Related
Sep 11, 2009
someone show me how to change formula values. i am limited on information i can enter.i tried filling entire area with data to perhaps get a gradual movement down from 27-28 . how do i edit the formula to read 5 to 200 instead of 5-27
View 3 Replies
View Related
Jan 19, 2012
All i want is to delete duplicate rows or data in query 1 column.......
Query 1Query 2Confidence_0.118_Length_701McdonaldsConfidence_0.118_Length_701Magic moments
Confidence_0.118_Length_701ZamaicanConfidence_0.176_Length_582Urobi
Confidence_0.176_Length_582McdonaldsConfidence_0.176_Length_582Rum
[Code] ...........
View 5 Replies
View Related
Dec 9, 2006
I need a macro, preferably a "sub" that will search a long text input and when it finds the first instance of the letters "GSH" in that order removing all previous text before it. The amount of text characters, letters, and order before the gsh will vary.
For example:
FGHYTIUGSHIYKIOLHY --> GSHIYKIOLHY
View 9 Replies
View Related
May 23, 2007
I have a cell with text in. I need a formula that will remove the characters "Age" from that cell and return the text without thoser characters. eg. Cell A1 = "What is the age we live in?" I need a formula to put in A2 so that it reads:"What is the we live in?"
View 3 Replies
View Related
May 18, 2009
I'm creating some workbooks from PDF files. After converting, some of the
values in column A get placed into column B along w/it's values. Column A should have only a 6 digit number. Column B may have a combination of numbers and letters, but more use of letters.
I'm trying to create a formula for that will remove the 6 digit number at the front of my text values if it is present in column b. If it is not, than the column should remain the same. Is there a way to say remove first six values
from left if values are numbers? The results should out put to sheet 2.
View 3 Replies
View Related
May 18, 2009
I've got a column with numbers. some of the numbers have the following signs/symbols proceeding the value in the same cell: ',ft,#,ea,each. I want to have these removed by a formula so that the numerical values are alone.
View 3 Replies
View Related
May 22, 2009
This is an continuation to some earlier formulations to place value correctly in cells. It started for me here: http://www.excelforum.com/excel-gene...ell-value.html
Now, I've come across another situaton. If there is a value of any combination of numerals and text "X" specifically as: 1x,21x,100x,1001x,10230x, I'd like to have the x removed. The resultant will be in column D of sheet FormulaOut. See attachment as this will be building on the following formula:
View 4 Replies
View Related
Jan 29, 2012
I want to have a user form named Advanced Character Removal which has different characters with checkboxes to select them
The selection should be grouped as
1,2,3 command box to select numbers
a,b,c command box to select alphabets Upper and Lower case
a,e,u command box to select special characters
Command box to select spaces
command box to slect symbols
command box to select invisible
command box to select linebreaks
command box to select all
command box to select none
Desining such a user form is a heavy task. what is the initial process so that i could work around it and complete it in Designing Advanced Character Removal User form.
I have a sample image of advanced user form in .gif format but i don't know how to attach it here..
View 2 Replies
View Related
Aug 24, 2012
what is wrong witht his code?
If Sheets("Workings").Cells(ExceptionCount, ColumnCount + 3).Value = 1 Then
Sheets("Allocations").Range(.Cells(ABIndex + 5 + week, (ColumnCount * 7) - 5), .Cells(ABIndex + 5 + week, ColumnCount * 7)).Value = ""
Else
End If
I know the If statement is working, but for some reason I can't fathom the line that removes the cell contents does nothing. I have tried ending with .ClearContents rather than .Value but that doesn't work either.
View 7 Replies
View Related
Nov 5, 2013
I'm password protecting a workbook. But I found this:
[URL] ........
Which I've tested and works to break the password.
Is there a way to "super" protect a workbook and worksheets from having the password broken?
View 1 Replies
View Related
Feb 16, 2009
I have a worksheet with several columns of data. In Col B are part numbers, in column D are dates. I wish to search through the data and remove all lines with duplicate cells in column B EXCEPT the line which has the latest date in colum D. I should then be left with a sheet that has no duplicate cells in column B and the latest date in column D.
View 9 Replies
View Related
Jul 10, 2009
I need a VBA code to remove multiple macro buttons from 31 multiple excel sheets with a single click.
View 9 Replies
View Related
Feb 4, 2007
i need a command to remove (delete) a member of a collection by its key. Something like: SomeXCollection.Remove 2213acv (where 2213acv is the key property of certain SomeXCollection member object) but this syntax (i found in Excel Help), doesn't work to me.
View 3 Replies
View Related
May 8, 2007
I have several Excel files with longitude values in column A, latitude in B, and data in columns C to DH. There is a lot of data in each file, so I was wondering if someone would be able to design a macro to achieve the following: I want any row containing zeros through column C to DA (not through to DH) to be deleted (deletion of the whole row, including DB to DH) - and the row beneath to be shifted up so no blank rows remain.
However, there are 16 instances where the row contains legitimate zeros and should be preserved in the dataset. These are at the following coordinates, where longitude (column A) is listed first, with latitude (B) second.
6.75, 27.75
8.25, 27.75
23.25, 27.75
24.75, 27.75
-2.25, 26.25
-0.75, 26.25
0.75, 26.25
2.25, 26.25
14.25, 26.25
-5.25, 24.75
-3.75, 24.75
-2.25, 24.75
15.75, 24.75
17.25, 24.75
9.75, 23.25
14.25, 21.75
So just to clarify, please could someone create a macro which deletes a row with zeros present from C to DA and shifts up the row beneath, except in the instances listed above.
View 9 Replies
View Related
Aug 25, 2009
im having a little trouble, I cant seam to get the correct structure for adding items to the 2007 ribbon. Withen workbook activate or deactivate i am using HandleMenu = true .... or false to show and remove the added ribbon. Though when i use the HandleMenu= false to remove the ribbon it leaves the Create report item behind. What am i missing to be able to remove it correctly.
View 3 Replies
View Related
Jun 1, 2012
Below is part of my recorder macro for removing subtotal on a specific field:
ActiveSheet.PivotTables("PivotTable2").PivotFields("PRODUCT MANAGER"). _
Subtotals = Array(False, False, False, False, False, False, False, False, False, False, False, False)
I am new to coding in a pivot. I hope the no.of "False" depends on no.of "PRODUCT MANAGER" (There are 12 PRODUCT MANAGERs)
But the problem is the no.of PRODUCT MANAGERs vary with data.
So i am stuck on how i can input correct no.of "False" (here 12) inside the array part.
View 1 Replies
View Related
Oct 17, 2013
Any way via VBA to remove HTML tags from a string that has been imported into a cell?
For example, if the cell contained(bearing in mind I can't actually use HTML tags in this post...
"LeftPointyBracket" B "RightPointyBracket" CatDog "LeftPointyBracket" I "RightPointyBracket" Elephant "LeftPointyBracket" B/ "RightPointyBracket"I would need CatDogElephant returning. So, any pointy brackets and anything between pairs of pointy brackets needs to be removed.
View 1 Replies
View Related
Oct 27, 2006
I have a spreadsheet ranging from A1 to AH602 Column AH contains row totals and Row 602 contains colunm totals. I am importing a CVS file starting at cell A4 - the number of rows contained in the import varies drastically. I would like to build a macro that would remove all the unused rows. I have tried to record a macro that would do this but the number of rows always ends up static and not variable.
What I'm doing below is Using an END+HOME to take me to the furthest point in the active range then 3 UP ARROWS to get to the desired row then an END+LEFT ARROW followed by END+UP ARROW and 2 DOWN ARROWS to get to the starting cell in Column A. At that point I use a SHIFT+END+DOWN ARROW to capture the range of Rows I need to delete.
Sub Macro1()
ActiveCell.SpecialCells(xlLastCell).Select
Range("AH599").Select
Selection.End(xlToLeft).Select
Selection.End(xlUp).Select
Range("A101").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.EntireRow.Delete
End Sub
This works except that the starting cell remains the static.
View 5 Replies
View Related
