Multiple Macro Buttons REMOVAL

Jul 10, 2009

I need a VBA code to remove multiple macro buttons from 31 multiple excel sheets with a single click.

View 9 Replies


ADVERTISEMENT

Multiple Macro Buttons (radio Buttons)?

Feb 10, 2012

I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.

Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.

While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.

Is there a quicker way?

View 6 Replies View Related

Call One Macro From Multiple Buttons - With Specifics As Needed

May 10, 2009

I've searched through the forums for this information, and I have found a couple of similar issues that have been solved, but copy+pasting the code into my form has not had favorable results.

Basically, here is what I am after:

I have a sheet that already has 4 buttons active, with a handful of other subs that they are calling. I am wanting to be able to add new buttons and have them call a universal macro that will forward them to my existing subs. However, I'm wanting a variable to be set based on the Caption of the button that was clicked. For example:

View 14 Replies View Related

Create Multiple Buttons All Assigned To Macro Code

Mar 6, 2008

I'd like to write a macro to create buttons with the caption "Fix" in over 300 cells. Furthermore, I would like each button, when pressed to run a macro that would copy and paste the values (paste special) of the entire row in which the button is situated as well as copy and "paste special" the values in the fixed cells $J$2, $K$2,$L$2, and $M$2. I've attached a file to clarify what I'm sure is an extremely convaluted statement of my problem.

View 5 Replies View Related

Pivot Table Subtotal Removal Macro?

Jun 1, 2012

Below is part of my recorder macro for removing subtotal on a specific field:

ActiveSheet.PivotTables("PivotTable2").PivotFields("PRODUCT MANAGER"). _
Subtotals = Array(False, False, False, False, False, False, False, False, False, False, False, False)

I am new to coding in a pivot. I hope the no.of "False" depends on no.of "PRODUCT MANAGER" (There are 12 PRODUCT MANAGERs)

But the problem is the no.of PRODUCT MANAGERs vary with data.

So i am stuck on how i can input correct no.of "False" (here 12) inside the array part.

View 1 Replies View Related

Color Multiple Buttons

Jan 27, 2010

I'm using this crude code to color multiple buttons at once. My query; Is there a way to make this code quicker and thus shorter?

View 2 Replies View Related

Buttons Available On Multiple Sheets?

Feb 4, 2012

I have a workbook with 20 worksheets. Sixteen of them represent the months and quarters of the year. On those 16 sheets, I would like to have two buttons (32 buttons in all). One button is to print (and does quite a bit of formatting) the report for that month and the other submits the report (formats, saves, and e-mails notifications) after the user completes it.

Rather than having to maintain 32 buttons, I would prefer to have two buttons that are available to each of the 16 sheets. Is there a way to do this?

View 4 Replies View Related

Multiple Toggle Buttons

Dec 9, 2008

I am having a small issue with my toggle buttons.

I have approximately 20 sheets that all have 4 toggle buttons on them. Coded as below (with different ranges for each button). So when I wrote them I took the easy (for me anyway) way and copied all the code for all the buttons in each sheet. (Buttons are named Zoom1, Zoom2 etc.)
Private Sub Zoom1_Click()
If Zoom1.Value = True Then
ActiveWindow.Zoom = 143
Range("A1").Select
ActiveWindow.LargeScroll ToRight:=-10, Down:=-10
Else
ActiveWindow.Zoom = 75
ActiveWindow.LargeScroll ToRight:=-10, Down:=-10
End If
End Sub.........

View 9 Replies View Related

How To Use Multiple Buttons To Assign Different Value To A Cell

Jul 1, 2014

There are 10 rows of data, and would like to assign value at the end of each row as "initiated" "In the process" "Needs to be Reviewed" "Completed", by using Buttons with different macros.

View 2 Replies View Related

Simplifying Formula For Multiple Buttons?

May 5, 2014

I have a series of rows and columns. Each intersection has a formula. I want to be able to manually enter text in the cells that contain formulas but then click a button next to the row if I want the formulas back. Here's what I have written so far. Is there an easier way to write these OR is there a more streamlined way of accomplishing what I'm after? There will be about 39 rows and 39 associated buttons.

(The screenupdating lines are there just because I don't want the screen to flash in any way when I click the button)

Code:
Sub Button1_Click()
Application.ScreenUpdating = False
Range("C28") = "=IF(AF74=0,"""",AF74)"
Range("G28") = "=IF(AG74=0,"""",AG74)"

[Code].....

View 1 Replies View Related

Convert Multiple Hyperlinks To Buttons

Jan 7, 2010

Can hyperlinks be converted to buttons
I've a large number of links so a global conversion is what I'm hoping for.

P.S. I'm running Excel 2010

View 9 Replies View Related

If Statment To Hide Multiple Labels And Buttons In Vba

Sep 3, 2009

I would like for the If statment to hide multiple labels and buttons. How can I add more than one condition after Else:?

View 3 Replies View Related

Duplicating Multiple Buttons Adjusting Target Cell Automatically

Jun 6, 2014

I tried to search the forum for my unique problem but had no luck. As you will see attached, I have a series of excel buttons I need to duplicate and have target a different set of cells. I am hoping there is a way to avoid manually doing this.

The goal of the document is to push the button when both colours in the row and column interact (research on birds). There are two additional behaviours with an exact same set of buttons but they need to target "Body Rush" and "Food Displacement" tables underneath. I need all the buttons on one page since multiple behaviours happen simultaneously that need to be recorded.

I have something like 100+ modules in VBA I have created, I am hoping there is an easier way to do this so I don't have to create another ~200 modules in order to get the last two behaviours setup.

I am hoping there is either an easier button system or way to make buttons adjust somehow.

I am not the most advanced VBA user

View 6 Replies View Related

Macro Buttons Or Icons In The 07

Jul 15, 2009

I have been using Excel for some time now but just started working back with the Macros! Finally figured out that you had to turn on the Designer tab to get to some of the functionality of the macros. I haven’t been able to find ANYTHING ANYWHERE to tell me how to create buttons or Icons in the 07 Excel!

View 2 Replies View Related

Add Custom Macro Buttons?

Mar 6, 2012

adding custom 16 x 16 buttons to toolbars, which weren't preset images or using the built in deisgner.

Was hoping there may be an add-in giving more variety of buttons or a way to import set images. Very frustrating as there are many microsoft 16x16 bmps / icons that would be ideal but the choice is extremely limited.

View 1 Replies View Related

Can I Link 3 Buttons To 1 Macro

May 11, 2007

Is it possible to link 3 buttons to one macro.

What I'm trying to do is have 3 buttons:

Load Button:
-Which makes a copy of the current sheet, renames it, and freezes its values

Print Button:
prints all the sheets

Clear button:
deletes all of the named sheets

I'm sure this can be done with an if then else statement, but I'm just not sure how to set it up to capture input.

View 9 Replies View Related

Macro: Using Command Buttons To Run Them

Jan 4, 2008

I can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.

I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.

This is what I recorded initially; this works from Tools>Macros

Sub Macro1()
'
' Macro1 Macro
' Macro recorded 04/01/2008 by Lucertola
'
'
Sheets("Reconciliation").Select
Range("P18:P39").Select
Selection.Copy
Range("W18").Select.....................

View 9 Replies View Related

Macro Operated By Several Buttons

Dec 11, 2006

I want to put navigation buttons on each of the twelve spreadsheets, in one workbook, to run one macro. Is it possible to do this or do I need to follow the route of creating a separate macro for each (forms) button?

The route I have begun is to create this simple navigation macro is as follows.

Sub Goto200and100()
ActiveSheet.Shapes("Button 2").Select
Range("Q1400").Select
End Sub
Sub Goto100and50()
ActiveSheet.Shapes("Button 91").Select
Range("Q1400").Select
End Sub

View 7 Replies View Related

Pop-up Tip Text For Macro Buttons

Oct 25, 2007

Is there a way to add a reference to a button, which could show the user what the button does before he clicks on it. I'm thinking something similar to moving the mouse to a program in the Windows taskbar.

View 4 Replies View Related

Change The Color Of Buttons Or Command Buttons

Mar 14, 2007

Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.

I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.

View 9 Replies View Related

Macro To Delete Buttons In Specific Row

Aug 8, 2013

I need to have my macro select all buttons in the current row (including the button I clicked on and delete them. There are many rows with buttons. Each row needs to have this button. So I need it to be row specific.

I know that this is how to select the row that the button is in:

VB : sh1.Buttons(Application.Caller).TopLeftCell.Row

But I do not know how to select the buttons in that row. It needs to be included in this:

VB:
Sub move()
Dim shname As String, sh1 As Worksheet, lc As Long, rw As Long
Set sh1 = ActiveSheet
lc = sh1.Cells.Find("*", , , , 2, 2).Column
rw = sh1.Buttons(Application.Caller).TopLeftCell.Row

[Code] .....

After many attempts and alot of research, I have some more code for this problem: This deletes all buttons in the sheet:

VB:
Sub DeleteShapes()
Dim shp As Shape
Dim myVar As Shapes
ActiveSheet.Activate

[Code] .....

And this deletes the current button only:

VB:
Sub pressbuttons()
With ActiveSheet.Buttons(Application.Caller)
.Delete
End With
End Sub

Any way to either limit the first code to just a particular row, or expand the second one to the entire row.

View 3 Replies View Related

Avoid Printing Macro Buttons?

Feb 17, 2009

I have an excel spread sheet set up with a button I created (a colored rectangle with text) that has been asigned a macro. When I print this spread sheet I do not want the 'button' to print on the page.

View 2 Replies View Related

Giving Different Colours To Macro Buttons?

Aug 15, 2014

how to give attractive colours to my ordinary macro buttons to which we assign macros

View 2 Replies View Related

Hide Macro Buttons When Emailing

Nov 23, 2012

I'm using the With ActiveSheet.MailEnvelope command in vb to send an email and it works fine, but the range I am selecting includes macro buttons on the sheet.

It is possible to prevent macro buttons from been printed by selecting Format Control > Properties on the button and unticking Print Object (off by default anyway).

Is there any equivalent way of preventing macro buttons from appearing in emails when a range is emailed rather than printed.

View 2 Replies View Related

Assign Activex Buttons To Macro

Feb 24, 2013

I have several Activex buttons in sheet "Options" and I would like to automatically assign each button to the same macro "Run_Options", in order to execute the macro "Run_Options" when I do click over any button.

How can I do that with a excel macro?

View 2 Replies View Related

Macro Buttons Not Working After Using Combobox

Aug 22, 2013

I have a couple of combo boxes with lists to generate data for a dynamic chart. Elsewhere on the page I have hyperlinks to other tabs in the form of round button shapes.

When you select from the combo box, the selected text shows in the box highlighted, which is fine, but whilst highlighted, no hyperlinks work. You have to click a random cell on the sheet, and then click the hyperlinks again. Something thats fine for me, but not for my users as there's a lot of them and they won't realise. they will just report it broken.

View 3 Replies View Related

Selecting Radio Buttons Using A Macro

Oct 20, 2008

I created two radio buttons on a spreadsheet where a user can select
one button for Yes and the other for No. When I right click these
buttons, I notice the names (shown on the left hand side of the
formula bar) are:

Option Button 3 (for No)
Option Button 4 (for Yes)

I'd like to create a macro that automatically selects the Yes or No
button depending on a cell value in another tab. If the cell value is
1, the macro should select Yes. If the value is 0 the macro should
select No.

I tried running the macro below:

Sub testSelectYesOrNo()
If Not IsEmpty(Sheets("Sheet2").Range("A1").Value) Then
Select Case Sheets("Sheet2").Range("A1").Value
Case Is = 1
Sheets("Sheet1").OptionButton4 = True
Case Is = 0
Sheets("Sheet1").OptionButton3 = True
End Select
End If
End Sub

But when this runs I get a "Run-time error 438 Object doesn't support this property or method"

When I click debug, the text "Sheets("Sheet1").OptionButton4 = True"
was highlighted.

View 9 Replies View Related

Protect Sheet With Macro Buttons

May 9, 2006

I have two macro buttons on a page that hide and unhide columns. When I got to protect the sheet .. the buttons no longer work and ask me to DEBUG. Is there a way to have macro buttons performing tasks AND have the sheet still protected?

In the protect sheet window .. am I have ticked is

Select Locked Cells
Select Unlocked Cells

But these are ticked as a default.

View 2 Replies View Related

Color Macro Command Buttons

Oct 29, 2006

I have a workbook which employs 4 different userforms. Navigating thru the workbook, the user ends up at a sheet with 5 macro buttons, allowing them to choose from several different functions. I added these to the worksheet using the "forms" toolbar.

My question is this: Is there anyway to change the color of these buttons, as I can with the userform buttons? Under "format control" I can change size, font, even color of font, but I can't change the background color of the button itself. Is it possible to identify those particular buttons thru VBA and adjust it's format?

View 7 Replies View Related

Macro: Remove Macros From Buttons

Dec 17, 2006

I am trying to come up with some code to loop through all worksheets in the workbook and remve assigned macros from any buttons on each sheet

My code below. I type btn. and reviewed the items offered by intellisense, but nothing seemed fitting.

Sub RemoveAssignedMacro()

Dim wb As Workbook
Dim btn As Shape
Dim sht As Worksheet

Set wb = ThisWorkbook

For Each sht In wb.Worksheets
For Each btn In sht.Shapes
btn.
Next btn
Next sht

End Sub

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved