The code below is self explanatory but it does not undo the border related formatting. Can you please guide and help me figure out my mistake. The attached image shows the worksheet that I am using....
View 9 Replies
Trying to select all cells below the last row of data based on column B and remove borders.
So far I have this.
[Code] .....
I am using a user form to display a splash screen. In the user form, I have a picture that is being displayed as splash screen for 5 seconds and then it disappears.
I only want to display the picture in the splash screen.
I want to to remove the following three items from the user form:
1 - remove all borders
2 - remove the menu/caption bar
3 - remove the "x" button that allows user to close form.
I am using a user form to display a splash screen. In the user form, I have a picture that is being displayed as splash screen for 5 seconds and then it disappears. I only want to display the picture in the splash screen. I want to to remove the following three items
from the user form:
1 - remove all borders
2 - remove the menu/caption bar
3 - remove the "x" button that allows user to close form.
The attached file works with 3 Drawers and 3 Doors but if I use 2 Drawers and 2 Doors the Borders do not line up. I think the Drawers are right the Doors appears to be the problem.
Same thing happens with 3 drawers and 4 Doors. It has and extra border on the right side.
See Attached : ozgrid cabinet error.xlsm
Also I would like for the Measurements to be in the cell to the right of the left hand border and center across each of the sections.
Change B3 and B4 to 2 then click draw. 3 and 3 work 3 and 4 don't but 4 and 4 does.???
I have designed a form with Grey horizontal borders.
When I print to my HP LaserJet 2420, the borders are black.
I have other forms with Grey borders where the borders print Grey.
I have not chosen to print Black and White in Page Setup.
How do I correct this?
I am having a hard time understanding why the following code (i am avoiding the select procedure on purpose) doesn't work:
Code:
Function APMS_Border(Namesheet As Variant, Mode As Variant, RowStart As Variant, ColStart As Variant, RowEnd As Variant, ColEnd As Variant, LeftBorder As Variant, TopBorder As Variant, RightBorder As Variant, BottomBorder As Variant, InterColor As Variant)
Dim BorderMatrix() As Variant
[Code]....
it only draws the left border of my range, am i missing something?
If I've defined borders for a range of cells and then, changing my mind, change it to "No Borders", those cells are still different than the normal, non-formated cells. Is there a way to get back the default cell bounders?
View 3 Replies View RelatedI have a spreadsheet that I'm working on and I'd like to include a beforesave macro to format the spreadsheet. Basically I need a macro to select all rows with data in column 'a' and add a thick border to the top of the cells. Ideally the border would stop at column 'i' but that's not essential. I've attached an example of what I'd like. I've included 2 sheets 1 called 'before' and 1 called 'after'. They show what I'm after.
View 3 Replies View RelatedI'm looking for the least amount of code to apply a border around every cell in a selected range. The standard With Selection approach is to go through six times for the sides, top, bottom, and insides, which results in a lot of code.
I attempted a single code line approach (Selection.Borders.LineStyle = xlContinuous), but I cannot seem to influence the color or thickness of the line. I'm not looking for fancy here...standard xlThin in black color is all I need.
I have made a toggle button to turn diagonal borders on and off in a single cell. Is there a way to make the button transparent, such that the button can be placed over the cell itself and the contents of the cell will be visible underneath, no matter the condition of the toggle?
View 8 Replies View RelatedIs there a way to format any row in the workbook based on text value in VBA?
e.g. If I type "BLANK" in any row of a worksheet, then the certain cells in that particular row will Format Borders xlDiagonalUp (D:G,K).
I am currently using the following formula to remove the letter "R" from the end of cells
[=IF(ISNUMBER(--RIGHT(A3)),A3,LEFT(A3,LEN(A3)-1))].
However, I would like a macro to accomplish this goal, along with something else. I have a list of values as follows:
CHD152-2
CHD115-1
CHD40-3
RE224
HPC644R
DOC020R
HPC594R
What I need is a macro that will remove any instance of "R", "-1", "-2", "-3", "-4" from the end of a cell. neither of the 5 values listed in the last sentence are present, the the cell will be unchange. So, after running, the above values would look like this:
CHD152
CHD115
CHD40
RE224
HPC644
DOC020
HPC594
This is my input:
Col A
asde,dsfts-qwsa/001,asdasd-qwsa,asdas
etert,ttyutt-tww/013,dgdd-tww,dsfsaa
.
.
.
.
.
Col B
qwsa
tww
In Col C.. I want the output to be as
asde,asdas
etert,dsfsaa
Requirement as a text:
I need a macro that removes the value in column A based on the value in Col B.
The data that the macro removes is always between the "," (comma).
macro find parenthesis and remove string in every other cell in Col.A
The following formula works but is tedious to apply to every other cell:
=LEFT(A3,FIND("(",A3)-2)
Data Example:
Cell Value A2 = hello world I am A2 (this is an example)
Cell Value A3 = hello world I am A2
Then Delete the entire row A2 and apply this to every other A.Col.cell with the original data.
I have a spreadsheet containing data in coloumns A to L.
Where all the codes in column B are the same then a border must be placed around all the codes that are the same i.e the border must start in Column A and end with column L.
provide me with the code the will put borders around the codes in column B that are the same ...
I have created a 4 page chart in landscape with text in each of the 4 columns in the chart.
When I looked at it in print preview the chart did not fill the page and so to widen the last 2 columns I dragged them over to the right hand margin. I am still definitely within the right hand dotted line showing the margin limit.
The problem is that I cannot now put a border line down the extreme right hand column. Every time I click on any of the border instructions in the Font tab nothin appears on the right hand side of the box.
I am trying to write vba code that will highlight the row in the range if a field is over a certain percent. The column number won't change but the number of rows will. I'd also like the code to automatically work on all tabs of the workbook when a button is clicked.
Data Info:
Currently there are 4 tabs, but can have more/less
Columns used are A:O
Data for shading starts at A3 and should go to however many rows have data and ignore blank rows
Formula should be if data in column E is over 10.00% then the data in that row A:O should be shaded in the color off yellow & have black thin orders
If the data in column E is not over 10.00% then the data in that row should not be shaded but still have thin black borders.
Is it possible to stop excel from pasting border formating with cell data other than to select paste special-all except borders?
View 5 Replies View RelatedI want to remove some cell borders for printing so that on paper it will look like 2 separate tables (ie, I want a space between the 2 tables). I have tried removing the borders and changing the colouring to white but they still show.
View 5 Replies View Relatedi am trying to do the following but having trouble getting my head around it!
if a2=0 then b2:b13=border
I need to change the thickness of the borders line but I couldn't find out how.
View 6 Replies View RelatedWhat I'm trying to do is put top&bottom borders on ALL cells in a range, not just the margins of the selected area. See spreadsheet below for explanation if required.
Surely there must be a way to do this through Excel menu, tools and whatever.
Alternatively, this could be solved if I knew how to select all rows in a spreadsheet (not Select All), because if I select rows one by one it will obviously apply the borders correctly. Is there a way to select multiple rows then?
A cell on sheet1 needs to count the number of cells on sheet2 (D3:D31) that has a complete (top, bottom, left and right) border. This is my best shot at it.
[Code] .....
Sheet1 cell I input =CountBrds('sheet2'!D3:D31)
One issue, on sheet2 for example cell D4 is merged with E4 and F4 as is every even cell in the D column down to row 30. Not sure if that throws a wrench in things or not.
This piece of code is run from a form when the user click OK. It dumps the data the user filled in on the form, below the last row on the sheet.
View 2 Replies View RelatedI have a spreadsheet that has descrptions in column D. Where the descriptions are the same ,
I need the VBA code that will do the following:
1) Sort the data by columns C (descending), G (ascending) & E (ascending)
2) Putting a border around all the data where the decriptions are the same
i.e from column A to Column I beginning from row 2
I have attached a sample file for ease of reference....
i have just recorded a macro to put thin borders in columns L and M, but it needs cleaning, ...
View 9 Replies View RelatedWith Range("A12", Range("E65536").End(xlUp))
With .Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
With .Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
With .Borders(xlEdgeBottom)
.LineStyle = xlContinuous
.Weight = xlThin......................
It is supposed to border data from columns A to E for all rows where data exists in column A. (like a dynamic range). How would I change the dynamic reference I have now?
I have a report that is imported into excel with all thick borders. Does anyone know a VBA code (or simpler way) to change all of these borders to skinny borders?
View 4 Replies View RelatedSometimes when i run code under a command button on a pop-up user form, the contents of the userform go "blank (i.e., border stays on, so you can see that the form is still there, but the contents are all "white"-you cannot read/see any of the content...
What could be done to prevent this from happening (presently, i just have the mouse cursor displaying while code is running?
