VBA Cell Borders Partially Working?

Nov 10, 2013

I am having a hard time understanding why the following code (i am avoiding the select procedure on purpose) doesn't work:

Code:
Function APMS_Border(Namesheet As Variant, Mode As Variant, RowStart As Variant, ColStart As Variant, RowEnd As Variant, ColEnd As Variant, LeftBorder As Variant, TopBorder As Variant, RightBorder As Variant, BottomBorder As Variant, InterColor As Variant)
Dim BorderMatrix() As Variant

[Code]....

it only draws the left border of my range, am i missing something?

View 3 Replies


ADVERTISEMENT

Printing Cell Borders

Jun 20, 2006

I have designed a form with Grey horizontal borders.

When I print to my HP LaserJet 2420, the borders are black.

I have other forms with Grey borders where the borders print Grey.

I have not chosen to print Black and White in Page Setup.

How do I correct this?

View 6 Replies View Related

Remove Cell Borders With Macro

Jun 28, 2007

The code below is self explanatory but it does not undo the border related formatting. Can you please guide and help me figure out my mistake. The attached image shows the worksheet that I am using....

View 9 Replies View Related

Cell Borders (get Back The Default Cell Bounders)

Jan 16, 2010

If I've defined borders for a range of cells and then, changing my mind, change it to "No Borders", those cells are still different than the normal, non-formated cells. Is there a way to get back the default cell bounders?

View 3 Replies View Related

Workbook>Beforesave Function To Add Cell Borders

Feb 9, 2010

I have a spreadsheet that I'm working on and I'd like to include a beforesave macro to format the spreadsheet. Basically I need a macro to select all rows with data in column 'a' and add a thick border to the top of the cells. Ideally the border would stop at column 'i' but that's not essential. I've attached an example of what I'd like. I've included 2 sheets 1 called 'before' and 1 called 'after'. They show what I'm after.

View 3 Replies View Related

VBA To Apply Borders Around Every Cell In Selected Range

Oct 19, 2012

I'm looking for the least amount of code to apply a border around every cell in a selected range. The standard With Selection approach is to go through six times for the sides, top, bottom, and insides, which results in a lot of code.

I attempted a single code line approach (Selection.Borders.LineStyle = xlContinuous), but I cannot seem to influence the color or thickness of the line. I'm not looking for fancy here...standard xlThin in black color is all I need.

View 3 Replies View Related

Add Diagonal Borders To Cell On Double Click

Sep 14, 2007

I have made a toggle button to turn diagonal borders on and off in a single cell. Is there a way to make the button transparent, such that the button can be placed over the cell itself and the contents of the cell will be visible underneath, no matter the condition of the toggle?

View 8 Replies View Related

Format Borders Based On Value In Far Left Cell

Jun 9, 2008

Is there a way to format any row in the workbook based on text value in VBA?

e.g. If I type "BLANK" in any row of a worksheet, then the certain cells in that particular row will Format Borders xlDiagonalUp (D:G,K).

View 5 Replies View Related

Is There A Way To Partially Delete Text?

Mar 10, 2009

I've got a long sheet that I imported that contains a column consisting of a URL - something like this for an example:

http://www.example.com/images/imageone.jpg
http://www.example.com/images/imagetwo.jpg
http://www.example.com/images/imagethree.jpg

Is there a formula that I can use to strip off the ...

View 6 Replies View Related

Partially Summing Row Based On A Value Another Row

Dec 29, 2012

I have a sheet with ascending week-ending dates in the row at the top.

Next row is the man-hours worked for each week.

Next row is the # of First Aids for each week.

Not every week has a first aid and I want to sum the number of hours worked since (not including) the week of the the last First Aid.

There is a summary sheet which pulls the data from any selected week via a HLOOKUP function. So, I'm thinking I'll add a hidden row with the new "Hours since last FA" under the # of FAs row and insert the magical formula into each cell in that row.

The dilemma is I can't come up with a formula/function to calculate the "hours since" data.

View 6 Replies View Related

Replacing Characters Partially

Jul 23, 2009

Hi, i need to change the second and third character from a 3 character word..

I need to change it into 2 characters with double Alphabetical order (TAA, TAB, TAC...TAZ, then TBA, TBB, TBC... TBZ, and so on).. kinda hard to explain.. it's like this:

View 11 Replies View Related

Find A Text String And Partially Index It

Aug 1, 2014

I would like to find a text string in the column A and index the value after the string.

For example: somewhere in the column A is a text "value: 800 USD" , so I would like to find the text and index the characters after the ": " in the cell C5. Therefore in the cell C would be "800 USD"

I am including sample file here: smpl.xlsx

View 1 Replies View Related

Extract Unique Values Which Partially Match?

Jun 20, 2014

I can extract unique values from the list but thing is I need extracts only those values which match partially below is scenario

Column A has values ----
Column B has Countries..

so I need extract only those values which eg : Contry is "*Ind*"

Code:
=INDEX($A$2:$A$15,MATCH(0,COUNTIF($C$1:C1,$A$2:$A$15),0))

above formula I used to get unique values I need to add one more criteria which gives only matched.

View 1 Replies View Related

Validation List Only Partially Sees Named Range

Feb 25, 2009

I've got a named range which defined using a custom function. Lets call this named range [range1] which is defined by:

View 14 Replies View Related

Making Partially Filled Horizontal Bar Based On Time System Is In Use

May 27, 2013

I have a list of jobs over a 24-hour period, that looks like this:

job1: 03:00am, duration 10 minutes
job2: 04:00am, duration 20 minutes
job3: 09:00am, duration 04 minutes
job4: 01:00pm, duration 65 minutes

Now I want to make a horizontal bar, that divides the bar into a 24-hour period (e.g. gray background) and fills the gaps that the system is in use with green parts, so in this example, the whole bar is gray and the part from 03:00am-03:10am+04:00am-04:20am+09:00am-09:04am + 01:00pm-02:05pm is filled in with green.

I have a list with about 300 of those jobs, so it would be nice if I could automate this. How to do this in Excel/VBA ?

View 1 Replies View Related

Compiling Partially Matching Data Into Matching Rows With Macro

Jan 20, 2013

My task is to combine two large databases into one spreadsheet by extending the number of columns. The data from each database is 90% matching based on an identification number, however occasionally there are additional rows or unmatched identification numbers that need to be kept for analysis.

When this happens, there needs to be a blank row inserted to represent the missing data in the rest of the corresponding row.

I am having trouble finding a quick way to do this because I have approximately 12,000 rows (and columns up to DV when combined).

for example:

p1
data
data
data
data
p2
data
data
data
data

[Code] .....

needs to become:

p1
data
data
data
data

[Code] .....

I am guessing I will need a macro of sorts, So far I have made one column that tell me if the ID's are matching or not (1 or 0) and if they are not matching (0) I manually insert the rest of the row that is missing or make space for the duplicate data (which needs to remain).

View 5 Replies View Related

Borders Around The Codes

Mar 22, 2007

I have a spreadsheet containing data in coloumns A to L.

Where all the codes in column B are the same then a border must be placed around all the codes that are the same i.e the border must start in Column A and end with column L.

provide me with the code the will put borders around the codes in column B that are the same ...

View 9 Replies View Related

Missing Borders

Oct 2, 2008

I have created a 4 page chart in landscape with text in each of the 4 columns in the chart.

When I looked at it in print preview the chart did not fill the page and so to widen the last 2 columns I dragged them over to the right hand margin. I am still definitely within the right hand dotted line showing the margin limit.

The problem is that I cannot now put a border line down the extreme right hand column. Every time I click on any of the border instructions in the Font tab nothin appears on the right hand side of the box.

View 9 Replies View Related

VBA For Shading And Borders

Feb 4, 2010

I am trying to write vba code that will highlight the row in the range if a field is over a certain percent. The column number won't change but the number of rows will. I'd also like the code to automatically work on all tabs of the workbook when a button is clicked.

Data Info:
Currently there are 4 tabs, but can have more/less
Columns used are A:O
Data for shading starts at A3 and should go to however many rows have data and ignore blank rows
Formula should be if data in column E is over 10.00% then the data in that row A:O should be shaded in the color off yellow & have black thin orders
If the data in column E is not over 10.00% then the data in that row should not be shaded but still have thin black borders.

View 9 Replies View Related

Paste Without Borders

Aug 19, 2007

Is it possible to stop excel from pasting border formating with cell data other than to select paste special-all except borders?

View 5 Replies View Related

Borders Macro Don't Line Up

Jan 22, 2014

The attached file works with 3 Drawers and 3 Doors but if I use 2 Drawers and 2 Doors the Borders do not line up. I think the Drawers are right the Doors appears to be the problem.

Same thing happens with 3 drawers and 4 Doors. It has and extra border on the right side.

See Attached : ozgrid cabinet error.xlsm

Also I would like for the Measurements to be in the cell to the right of the left hand border and center across each of the sections.

Change B3 and B4 to 2 then click draw. 3 and 3 work 3 and 4 don't but 4 and 4 does.???

View 2 Replies View Related

Removing Borders For Printing

Jul 6, 2009

I want to remove some cell borders for printing so that on paper it will look like 2 separate tables (ie, I want a space between the 2 tables). I have tried removing the borders and changing the colouring to white but they still show.

View 5 Replies View Related

Conditional Formatting - Borders

Jul 9, 2009

i am trying to do the following but having trouble getting my head around it!

if a2=0 then b2:b13=border

View 10 Replies View Related

How To Change Thickness Of Borders

Aug 20, 2013

I need to change the thickness of the borders line but I couldn't find out how.

View 6 Replies View Related

Borders Around All Cells In A Range

Nov 26, 2013

What I'm trying to do is put top&bottom borders on ALL cells in a range, not just the margins of the selected area. See spreadsheet below for explanation if required.

Surely there must be a way to do this through Excel menu, tools and whatever.

Alternatively, this could be solved if I knew how to select all rows in a spreadsheet (not Select All), because if I select rows one by one it will obviously apply the borders correctly. Is there a way to select multiple rows then?

View 5 Replies View Related

VBA Counting Cells With Borders

May 19, 2014

A cell on sheet1 needs to count the number of cells on sheet2 (D3:D31) that has a complete (top, bottom, left and right) border. This is my best shot at it.

[Code] .....

Sheet1 cell I input =CountBrds('sheet2'!D3:D31)

One issue, on sheet2 for example cell D4 is merged with E4 and F4 as is every even cell in the D column down to row 30. Not sure if that throws a wrench in things or not.

View 4 Replies View Related

Remove Borders Below Last Row Of Data?

Jun 2, 2014

Trying to select all cells below the last row of data based on column B and remove borders.

So far I have this.

[Code] .....

View 4 Replies View Related

Remove Userform Borders?

Aug 1, 2009

I am using a user form to display a splash screen. In the user form, I have a picture that is being displayed as splash screen for 5 seconds and then it disappears.

I only want to display the picture in the splash screen.

I want to to remove the following three items from the user form:

1 - remove all borders
2 - remove the menu/caption bar
3 - remove the "x" button that allows user to close form.

View 7 Replies View Related

Select Last Row And Format Borders

Apr 29, 2009

This piece of code is run from a form when the user click OK. It dumps the data the user filled in on the form, below the last row on the sheet.

View 2 Replies View Related

Using Borders Where Data Is Similar

Apr 17, 2007

I have a spreadsheet that has descrptions in column D. Where the descriptions are the same ,

I need the VBA code that will do the following:

1) Sort the data by columns C (descending), G (ascending) & E (ascending)

2) Putting a border around all the data where the decriptions are the same
i.e from column A to Column I beginning from row 2

I have attached a sample file for ease of reference....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved